자외선-C 발광 YPO4:Pr3+ 분말제조 및 YPO4:Pr3+-PVDF 전계 발광소자 특성 연구

Fabrication of UV-C Emitting YPO4:Pr3+ Powder and Properties of YPO4:Pr3+-PVDF Electroluminescence Device

  • 백경도 (부경대학교 전기공학부 디스플레이반도체공학전공) ;
  • 아판디 모하메드 (부경대학교 전기공학부 디스플레이반도체공학전공) ;
  • 박재홍 (부경대학교 전기공학부 디스플레이반도체공학전공) ;
  • 김종수 (부경대학교 전기공학부 디스플레이반도체공학전공) ;
  • 정용석 (부경대학교 전기공학부 디스플레이반도체공학전공)
  • Baek, GyeongDo (Major of Display Semiconductor Engineering, Division of Electrical Engineering, Pukyong National University) ;
  • Afandi, Mohammad M. (Major of Display Semiconductor Engineering, Division of Electrical Engineering, Pukyong National University) ;
  • Park, Jehong (Major of Display Semiconductor Engineering, Division of Electrical Engineering, Pukyong National University) ;
  • Kim, Jongsu (Major of Display Semiconductor Engineering, Division of Electrical Engineering, Pukyong National University) ;
  • Jeong, Yongseok (Major of Display Semiconductor Engineering, Division of Electrical Engineering, Pukyong National University)
  • 투고 : 2022.04.11
  • 심사 : 2022.06.22
  • 발행 : 2022.06.30

초록

The ultraviolet-C emitting praseodymium doped yttrium phosphate (YPO4:Pr3+) powder was synthesized by conventional solid-state reaction. The electroluminescence device was fabricated by simple screen-printing method using the synthesized YPO4:Pr3+ powder, especially, polyvinylidene fluoride as an insulating layer was applied on the printed YPO4:Pr3+ powder for stable performance of the electroluminescence. The electroluminescence properties were investigated under alternating current power system of 400 Hz. The device starts to emit at 350 V, which showed the ultraviolet-C emission peaking at the 233, 245, 264, 273 nm attributed to electronic transition of the Pr3+ ions. The electroluminescence intensity was increased as increasing the operating voltage and the device revealed stable performance up to 600 V due to the polyvinylidene fluoride serve as a protective layer.

키워드

과제정보

이 논문은 부경대학교 자율창의학술연구비(2021년)에 의하여 연구되었음.

참고문헌

  1. M. Kneissl, T. Seong, J. Han, H. Amano, "The emergence and prospects of deep-ultraviolet light-emitting diode technologies", Nat. Photonics, Vol. 13, pp. 232-244, 2019.
  2. M. Kneissl, J. Rass, III-Nitride Ultraviolet Emitters-Technology and Applications, Springer, Germany, 2016.
  3. X. Fan, R. Huang, H. Chen, "Application of ultraviolet C technology for surface decontamination of fresh produce", Trends Food Sci. Technol, Vol. 70, pp. 9-19. 2017. https://doi.org/10.1016/j.tifs.2017.10.004
  4. Jugyeong Lee, Mohammad M. Afandi, Jongsu Kim, Hoon Heo, "Ultraviolet-emissive BaSiO3:Ce3+ Phosphor for VUV Excimer Lamp", J. of The Korean Society of Semiconductor & Display Technology, Vol. 20, pp. 1-5, 2021.
  5. T. Justel, R. Hilbig, C. Feldmann, H. Jungk, W. Mayr, US 6,734,631 B2, 2004.
  6. M. Aschner, S. J. Walker, "The neuropathogenesis of mercury toxicity", Mol. Psychiatry, Vol. 7, pp. S40-S41, 2002 https://doi.org/10.1038/sj.mp.4001176
  7. M. Broxtermann, T. Dierkes, L. M. Funke, M. Salvermoser, M. Laube, S. Natemeyer, N. Braun, M. R. Hansen, T. Justel, "An UV-C/ B Emitting Xe Excimer Discharge Lamp Comprising BaZrSi3O9 - A Lamp Performance and Phosphor Degradation Analysis", J. Lumin, Vol. 200, pp. 1-8, 2018. https://doi.org/10.1016/j.jlumin.2018.03.043
  8. N. M. Masoud, D. E. Murnick, "High efficiency fluorescent excimer lamp: An alternative to mercury based UVC lamps", Rev. Sci. Instrum, Vol. 84, pp. 123108, 2013. https://doi.org/10.1063/1.4842296
  9. J. Cho, "Structural distortion induced enhancement in UV-C emitting properties of Pr3+-activated La-substituted yttrium phosphates (Y1-xLaxPO4:Pr3+)", J. Alloys Compd., Vol. 865, pp.158707, 2021. https://doi.org/10.1016/j.jallcom.2021.158707
  10. A. M. Srivastava, "Inter- and intraconfigurational optical transitions of the Pr3+ ion for application in lighting and scintillator technologies", J. Lumin, Vol. 129, pp. 1419-1421, 2009. https://doi.org/10.1016/j.jlumin.2009.01.041
  11. Z. Yin, Z. Zhu, P. Lv, X. Zhang, X. Qi, Y. Yang. "Luminescent properties of UVC up-conversion glassy phosphor: Li2SrSiO4 manufactured by containerless solidification", Mater. Lett, Vol. 291, pp. 129613, 2021. https://doi.org/10.1016/j.matlet.2021.129613
  12. J. M. A. Caiut, S. Lechevallier, J. Dexpert-Ghys, B. Caillier, P. Guillot, "UVC emitting phosphors obtained by spray pyrolysis", J. Lumin, Vol. 131, pp. 628-632, 2011. https://doi.org/10.1016/j.jlumin.2010.11.004
  13. M. Afandi, H. Kang, T. Kang, J. Park, J. Kim, "ACDriven Ultraviolet-C Electroluminescence from an AllSolution-Processed CaSiO3:Pr3+ Thin Film Based on a Metal-Oxide-Semiconductor Structure", Adv. Mater. Interfaces, Vol. 9, pp. 2200248, 2022. https://doi.org/10.1002/admi.202200248