Acknowledgement
이 연구는 금오공과대학교 대학 학술연구비로 지원되었음(2021).
References
- Bendsoe, M.P., Kikuchi, N. (1988) Generating Optimal Topologies in Structural Design Using a Homogenization Method, Comput. Methods Appl. Mech. & Eng., 71, pp.197~224. https://doi.org/10.1016/0045-7825(88)90086-2
- Cha, S.H., Kim, H.S., Cho, S. (2015) Topology Design Optimization and Experimental Validation of Heat Conduction Problems, J. Comput. Struct. Eng. Inst. Korea, 28(1), pp.9~18. https://doi.org/10.7734/COSEIK.2015.28.1.9
- Cha, S.H., Lee, S.W., Cho, S. (2013) Experimental Validation of Topology Design Optimization, J. Comput. Struct. Eng. Inst. Korea, 26(4), pp.241~246. https://doi.org/10.7734/COSEIK.2013.26.4.241
- Cho, S., Jung, H. (2003) Design Sensitivity Analysis and Topology Optimization of Displacement-loaded Nonlinear Structures, J. Comput. Methods Appl. Mech. & Eng., 192, pp.2539~2553. https://doi.org/10.1016/S0045-7825(03)00274-3
- Cho, S., Park, C.Y., Park, Y.H., Hong, S.Y. (2006) Topology Design Optimization of Structures at High Frequencies using Power Flow Analysis, J. Sound & Vibr., 298(1-2), pp. 206~220. https://doi.org/10.1016/j.jsv.2006.05.015
- Choi, M.J., Yoon, M.H., Cho, S. (2014) Experimental Validation of Isogeometric Optimal Design, J. Comput. Struct. Eng. Inst. Korea, 27(5), pp.345~352. https://doi.org/10.7734/COSEIK.2014.27.5.345
- Kim, B.J. (2020) Effect of Fused Deposition Conditions on the Fracture Behavior of 3D Printed Tensile Specimens, J. Korean Soc. Precis. Eng., 37(6), pp.421~428. https://doi.org/10.7736/jkspe.020.048
- Park, N.S. (2001) Study on Multi Objective Optimization Application of the Lower Control ARM of the Vehicle Suspension System, Donga University Graduate School, Master thesis.
- Sigmund, O. (1997) On the Design of Compliant Mechanisms using Topology Optimization, Mech. Struct. & Mach., 25(4), pp.493~524. https://doi.org/10.1080/08905459708945415
- Yoon, M.H., Koo, B.Y., Ha, S.H., Cho, S. (2011) Isogeometric Shape Design Optimization of Structures Subjected to Design-dependent Loads, J. Comput. Struct. Eng. Inst. Korea, 24(1), pp.1~8.