과제정보
This research was supported by the Korea Hydro & Nuclear Power (KHNP) Co. (G18IO16). This work was also supported by grants (No. 2021R1A2C201467, NRF-2019M1A7A1A03089763) of the National Research Foundation (NRF) funded by The Ministry of Science and ICT (MSIT) and a grant (20191510301420) of the Korea Institute of Energy Technology Evaluation and Planning (KETEP) funded by The Ministry of Trade, Industry and Energy (MOTIE), Republic of Korea.
참고문헌
- B. Volmert, V. Bykov, D. Petrovic, J. Kickhofel, N. Amosova, J.H. Kim, C.W. Cho, Illustration of Nagra's AMAC approach to Kori-1 NPP decommissioning based on experience from its detailed application to Swiss NPPs, Nucl. Eng. Technol. 53 (2021) 1491-1510, https://doi.org/10.1016/j.net.2020.10.010.
- Y.H. Hwang, S. Hwang, S. Hong, K.S. Park, N.K. Kim, D.W. Jung, C.W. Kim, A study on segmentation process of the K1 reactor vessel and internals, J. Nucl. Fuel Cycle Waste Technol. 17 (2019) 437-445, https://doi.org/10.7733/jnfcwt.2019.17.4.437.
- M. Cumo, Decommissioning of nuclear plants, in: D.G. Cacuci (Ed.), Handbook of Nuclear Engineering Volume 5, Springer, New York, 2010, pp. 3122-3147.
- I. Kim, B. Choi, D. Hyun, J. Moon, J. Lee, K. Jeong, S. Kang, A framework for a flexible cutting-process simulation of a nuclear facility decommission, Ann. Nucl. Energy 97 (2016) 204-207, https://doi.org/10.1016/j.anucene.2016.07.004.
- H. Seki, M. Imamura, H. Nagase, Evaluating precise quantity of decommissioning waste by cutting virtual 3D models of large equipment, Nucl. Sci. 5 (2020) 36-43, https://doi.org/10.11648/j.ns.20200503.12.
- W. Pfeifer, B. Eisenmann, F.W. Bach, R. Versemann, H. Bienia, V. Krink, F. Laurisch, Plasma cutting in the multi-purpose research reactor (MZFR) - underwater use at steel thicknesses of up to 130 MM, Weld. World 51 (2007) 3-10, https://doi.org/10.1007/BF03266603.
- S.I. Kim, H.Y. Lee, J.S. Song, A study on characteristics and internal exposure evaluation of radioactive aerosols during pipe cutting in decommissioning of nuclear power plant, Nucl. Eng. Technol. 50 (2018) 1088-1098, https://doi.org/10.1016/j.net.2018.06.010.
- M. Tezuka, Y. Nakamura, H. Iwai, K. Sano, Y. Fukui, The development of thermal and mechanical cutting technology for the dismantlement of the internal core of Fukushima Daiichi NPS, J. Nucl. Sci. Technol. 51 (2014) 1054-1058, https://doi.org/10.1080/00223131.2014.912969.
- AF-Colenco Ltd, Dismantling Techniques, Decontamination Techniques, Dissemination of Best Practice, Experience and Know-How, Co-ordination Network on Decommissioning of Nuclear Installations (CND), 2009, pp. 49-50. Final Report.
- J.R. Davis, ASM Specialty Handbook Heat-Resistant Materials, ASM International, Ohio, 1997, pp. 3-12.
- S. Sun, M. Brandt, M.S. Dargusch, Thermally enhanced machining of hard-to-machine materialsda review, Int. J. Mach. Tool Manufact. 50 (2010) 663-680. https://doi.org/10.1016/j.ijmachtools.2010.04.008
- L. Gardner, A. Insausti, K.T. Ng, M. Ashraf, Elevated temperature material properties of stainless steel alloys, J. Constr. Steel Res. 66 (2010) 634-647, https://doi.org/10.1016/j.jcsr.2009.12.016.
- L.N. Lopez de Lacalle, J.A. Sanchez, A. Lamikiz, A. Celaya, Plasma assisted milling of heat-resistant superalloys, ASME J. Manuf. Sci. Eng. 126 (2004) 274-285, https://doi.org/10.1115/1.1644548.
- C.E. Leshock, J.N. Kim, Y.C. Shin, Plasma enhanced machining of Inconel 718: modelling of workpiece temperature with plasma heating and experimental results, Int. J. Mach. Tool Manufact. 41 (2001) 877. https://doi.org/10.1016/S0890-6955(00)00106-1
- S. Aggarwal, N. Nesic, P. Xirouchakis, Cutting torque and tangential cutting force coefficient identification from spindle motor current, Int. J. Adv. Manuf. Technol. 65 (2013) 81-95, https://doi.org/10.1007/s00170-012-4152-x.
- Y. Kimura, H. Takeyama, Development of a high performance end mill based on the analysis of chip flow generated by curved rake face, CIRP Annals 52 (2003) 57-60, https://doi.org/10.1016/S0007-8506(07)60530-7.
- M.Y. Friedman, E. Lenz, Investigation of the tool-chip contact length in metal cutting, Int. J. Mach. Tool Des. Res. 10 (1970) 401-416, https://doi.org/10.1016/0020-7357(70)90001-6.
- https://www.yg1.kr/kor/support/catalog.asp.
- A.K.M.N. Amin, T.L. Ginta, Heat-assisted machining, in: S. Hashmi, G.F. Batalha, C.J.V. Tyne, B. Yilbas (Eds.), Comprehensive Materials Processing, vol. 11, Elsevier, 2014, pp. 297-331, https://doi.org/10.1016/B978-0-08-096532-1.01118-3.