DOI QR코드

DOI QR Code

Reliability analysis of external and internal stability of reinforced soil under static and seismic loads

  • Ahmadi, Rebin (Geotechnical Engineering, Shahid Rajaee Teacher Training University) ;
  • Jahromi, Saeed Ghaffarpour (Faculty of Civil Engineering, Shahid Rajaee Teacher Training University) ;
  • Shabakhty, Naser (School of Civil Engineering, Iran University of Science and Technology)
  • 투고 : 2021.10.23
  • 심사 : 2022.04.27
  • 발행 : 2022.06.25

초록

In this study, the reliability analysis of internal and external stabilities of Reinforced Soil Walls (RSWs) under static and seismic loads are investigated so that it can help the geotechnical engineers to perform the design more realistically. The effect of various variables such as angle of internal soil friction, soil specific gravity, tensile strength of the reinforcements, base friction, surcharge load and finally horizontal earthquake acceleration are examined assuming the variables uncertainties. Also, the correlation coefficient impact between variables, sensitivity analysis, mean change, coefficient of variation and type of probability distribution function were evaluated. In this research, external stability (sliding, overturning and bearing capacity) and internal stability (tensile rupture and pull out) in both static and seismic conditions were investigated. Results of this study indicated sliding as the predominant failure mode in the external stability and reinforcing rupture in the internal stability. First-Order Reliability Method (FORM) are applied to estimate the reliability index (or failure probability) and results are validated using the Monte Carlo Simulation (MCS) method. The results showed among all variables, the internal friction angle and horizontal earthquake acceleration have dominant impact on the both reinforced soil wall internal and external stabilities limit states. Also, the type of probability distribution function affects the reliability index significantly and coefficient of variation of internal friction angle has the greatest influence in the static and seismic limits states compared to the other variables.

키워드

참고문헌

  1. Ahmed, S.M. and Basha, B.M. (2021), "External stability analysis of narrow backfilled gravity retaining walls", Geotech. Geol. Eng., 39(2), 1603-1620. https://doi.org/10.1007/s10706-020-01580-3.
  2. Basha, B.M. and Babu, G.S. (2010), "Optimum design for external seismic stability of geosynthetic reinforced soil walls: reliability based approach", J. Geotech. Geoenviron. Eng., 136(6), 797-812. https://doi.org/10.1061/(ASCE)GT.1943-5606.0000289.
  3. Basha, B.M. and Babu, G.S. (2012), "Target reliability-based optimisation for internal seismic stability of reinforced soil structures", Geotechnique, 62(1), 55-68. https://doi.org/10.1680/geot.8.P.076.
  4. Basha, B.M. and Babu, G.S. (2014), "Reliability-based load and resistance factor design approach for external seismic stability of reinforced soil walls", Soil Dyn. Earthq. Eng., 60, 8-21. https://doi.org/10.1016/j.soildyn.2014.01.013.
  5. Carlos, D.M., Pinho-Lopes, M. and Lopes, M.L. (2016), "Effect of geosynthetic reinforcement inclusion on the strength parameters and bearing ratio of a fine soil", Proc. Eng., 143, 34-41. https://doi.org/10.1016/j.proeng.2016.06.005.
  6. Chalermyanont, T. and Benson, C.H. (2004). "Reliability-based design for internal stability of mechanically stabilized earth walls", Geotech. Geoenviron. Eng., 130(2), 163-176. https://doi.org/10.1061/(ASCE)1090-0241(2004)130:2(163).
  7. Chehade, H.A., Dias, D., Sadek, M., Jenck, O. and Chehade, F.H. (2021), "Pseudo-static analysis of reinforced earth retaining walls", Acta Geotechnica, 1-15. https://doi.org/10.1007/s11440-021-01148-2.
  8. Choudhury, D., Nimbalkar, S.S. and Mandal, J.N. (2007), "External stability of reinforced soil walls under seismic conditions", Geosynthetics Int., 14(4), 211-218. https://doi.org/10.1680/gein.2007.14.4.211.
  9. Genske, D.D., Adachi, T. and Sugito, M. (1991), "Reliability analysis of reinforced earth retaining structures subjected to earthquake loading", Soils Found., 31(4), 48-60. https://doi.org/10.3208/sandf1972.31.4_48.
  10. Griffiths, D.V. and Fenton, G.A. (Eds.). (2007), Probabilistic methods in geotechnical engineering (Vol. 491), Springer Science & Business Media.
  11. GuhaRay, A., Mondal, S. and Mohiuddin, H.H. (2018), "Reliability analysis of retaining walls subjected to blast loading by finite element approach", J. Inst. Engineers (India): Series A, 99(1), 95-102. https://doi.org/10.1007/s40030-018-0273-z.
  12. Hamrouni, A., Dias, D. and Sbartai, B., (2018), "Reliability analysis of a mechanically stabilized earth wall using the surface response methodology optimized by a genetic algorithm", Geomech. Eng., 15(4), 937-945. https://doi.org/10.12989/gae.2018.15.4.937.
  13. Jingyu, C., Zhihong, N., Lianheng, Z. and Wei, L. (2016), "Case study on the typical failure modes and reliability of reinforced-earth retaining wall", Electronic J. Geotech. Eng., 21(1), 305-317. http://www.ejge.com/2016/Ppr2016.0032ma.pdf.
  14. Jones, C.J. (1985), Earth reinforcement and soil structures. Elsevier.
  15. Melchers, R.E. and Beck, A.T. (2018), Structural reliability analysis and prediction. John wiley & sons.
  16. Mononobe, N. and Matsuo, H. (1929), "On the determination of earth pressure during earthquakes", Proceedings of the World Engineering Conf., Vol. 9, str. 176.
  17. Okabe, S. (1924), "General theory on earth pressure and seismic stability of retaining wall and dam", Proc. Civil Engrg. Soc., Japan, 10(6), 1277-1323.
  18. Pang, R., Xu, B., Kong, X., Zou, D. and Zhou, Y. (2018), "Seismic reliability assessment of earth-rockfill dam slopes considering strain-softening of rockfill based on generalized probability density evolution method", Soil Dyn. Earthq. Eng., 107, 96-107. https://doi.org/10.1016/j.soildyn.2018.01.020.
  19. Pang, R., Xu, B., Zhou, Y. and Song, L. (2021), "Seismic time-history response and system reliability analysis of slopes considering uncertainty of multi-parameters and earthquake excitations", Comput. Geotech., 136, 104245. https://doi.org/10.1016/j.compgeo.2021.104245.
  20. Phoon, K.K. and Ching, J. (2Eds.) (2015), Risk and reliability in geotechnical engineering. CRC Press.
  21. Powers, M. (2017), Reliability Analysis of Geosynthetic Reinforced Soil Walls. Graduate Theses & Non-Theses, 136, http://digitalcommons.mtech.edu/grad_rsch/136.
  22. Muktinutalapati, J. and GuhaRay, A. (2021), "Earth pressures on retaining walls backfilled with sand admixed with building derived materials: Laboratory scale study", Int. J. Geomech., 21(6), 04021072. https://doi.org/10.1061/(ASCE)GM.1943-5622.0002030.
  23. Sayed, S., Dodagoudar, G.R. and Rajagopal, K. (2008), "Reliability analysis of reinforced soil walls under static and seismic forces", Geosynthetics Int., 15(4), 246-257, https://doi.org/10.1680/gein.2008.15.4.246.
  24. Tobutt, D.C. (1982), "Monte Carlo simulation methods for slope stability", Comput. Geosci., 8(2), 199-208 https://doi.org/10.1016/0098-3004(82)90021-8.
  25. Vesic, A.S. (1967), A study of the bearing capacity of deep foundations.
  26. Vidal, H. (1969), The principle of reinforced earth, Highway Research Board, No. 282, 1-16 http://onlinepubs.trb.org/Onlinepubs/hrr/1969/282/282-001.pdf.
  27. Zevgolis, I.E. and Bourdeau, P.L. (2017), "Reliability and redundancy of the internal stability of reinforced soil walls", Comput. Geotech., 84, 152-163 (https://doi.org/10.1016/j.compgeo.2016.11.022