DOI QR코드

DOI QR Code

Remaining useful life prediction for PMSM under radial load using particle filter

  • Lee, Younghun (Department of Mechanical Engineering, Konkuk University) ;
  • Kim, Inhwan (Department of Mechanical Engineering, Konkuk University) ;
  • Choi, Sikgyoung (Department of Mechanical Engineering, Konkuk University) ;
  • Oh, Jaewook (Department of Mechanical Engineering, Konkuk University) ;
  • Kim, Namsu (Department of Mechanical Engineering, Konkuk University)
  • 투고 : 2021.10.31
  • 심사 : 2022.03.29
  • 발행 : 2022.06.25

초록

Permanent magnet synchronous motors (PMSMs) are widely used in systems requiring high control precision, efficiency, and reliability. Predicting the remaining useful life (RUL) with health monitoring of PMSMs prevents catastrophic failure and ensures reliable operation of system. In this study, a model-based method for predicting the RUL of PMSMs using phase current and vibration signals is proposed. The proposed method includes feature selection and RUL prediction based on a particle filter with a degradation model. The Paris-Erdogan model describing micro fatigue crack propagation is used as the degradation model. An experimental set-up to conduct accelerated life test, capable of monitoring various signals was designed in this study. Phase current and vibration data obtained from an accelerated life test of the PMSMs were used to verify the proposed approach. Features extracted from the data were clustered based on monotonicity and correlation clustering, respectively. The results identify the effectiveness of using the current data in predicting the RUL of PMSMs.

키워드

과제정보

This work was supported by Konkuk University in 2018.

참고문헌

  1. Alam, T. and Hur, J. (2020), "Remaining useful life estimation of BLDC motor considering voltage degradation and attention-based neural network", IEEE Access, 8, 168414-168428. https://doi.org/10.1109/ACCESS.2020.3023335.
  2. Alam, T. and Hur, W. (2021), "ANN assisted multi sensor information fusion for BLDC motor fault diagnosis", IEEE Access, 9, 9429-9441. http://doi.org/10.1109/ACCESS.2021.3050243.
  3. An, D., Choi, J.H. and Kim, N.H. (2013), "Prognostics 101: A tutorial for particle filter-based prognostics algorithm using Matlab", Reliab. Eng. Syst. Saf., 115, 161-169. https://doi.org/10.1016/j.ress.2013.02.019.
  4. Benbouzid, M. (2000), "A review of induction motors signature analysis as a medium for faults detection", IEEE Trans. Indus. Electron., 47(5), 1564-1575. https://doi.org/10.1109/41.873206.
  5. Ebrahimi, B.M. and Faiz, J. (2012), "Configuration impacts on eccentricity fault detection in permanent magnet synchronous motors", IEEE Trans. Magnet., 48(2), 903-906. https://doi.org/10.1109/TMAG.2011.2172977.
  6. Gangsar, P. and Tiwari, R. (2020), "Signal based condition monitoring techniques for fault detection and diagnosis of induction motors: A state-of-the-art review", Mech. Syst. Signal Pr., 144, 106908. https://doi.org/10.1016/j.ymssp.2020.106908.
  7. Han, Q., Ding, Z., Xu, X., Wang, T. and Chu, F. (2019), "Stator current model for detecting rolling bearing faults in induction motors using magnetic equivalent circuits", Mech. Syst. Signal Pr., 131, 554-575. https://doi.org/10.1016/j.ymssp.2019.06.010.
  8. Heng, A., Zhang, S., Tan, A. and Mathew, J. (2009), "Rotating machinery prognostics: State of the art, challenges and opportunities", Mech. Syst. Signal Pr., 23(3), 724-739. https://doi.org/10.1016/j.ymssp.2008.06.009.
  9. Jaoude, A.A. (2015), "The paradigm of complex probability and analytic linear prognostic for unburied petrochemical pipelines", Syst. Sci. Control Eng., 5(1), 178-214. https://doi.org/10.1080/21642583.2017.1310062.
  10. Khlaief, A., Boussak, M. and Chaari, A. (2013), "A-real-time open phase faults detection for IPMSM drives based on Discrete Fourier Transform phase analysis", 2013 International Conference on Electrical Engineering and Software Applications, March.
  11. Kim, S., Ouyang, M. and Zhang, X. (2012), "Compute spearman correlation coefficient with Matlab/CUDA", 2012 IEEE International Symposium on Signal Processing and Information Technology (ISSPIT), December.
  12. Lei, Y., Li, N., Lin, J., Radkowski, S. and Dybala, J. (2016), "A model-based method for remaining useful life prediction of machinery", IEEE Trans. Reliab., 65(3), 1314-1326. https://doi.org/10.1109/TR.2016.2570568.
  13. Mo, B., Yu, J., Tang, D., Liu, H. and Yu, J. (2016), "A remaining useful life prediction approach for lithium-ion batteries using Kalman filter and an improved particle filter", 2016 IEEE International Conference on Prognostics and Health Management (ICPHM), June.
  14. Nectoux, P., Gouriveau, R., Medjaher, K. and Ramasso, E. (2012), "PRONOSTIA: An experimental platform for bearings accelerated degradation tests", IEEE International Conference on Prognostics and Health Management, Denver, Colorado, United States.
  15. Newby, M. (1991), "Estimation of Paris-Erdogan law parameters and the influence of environmental factors on crack growth", Int. J. Fatigue, 13(4), 291-301. https://doi.org/10.1080/21642583.2017.1310062.
  16. Ojaghi, M., Sabouri, M. and Faiz, J. (2017), "Analytic model for induction motors under localized bearing faults", IEEE Trans. Energy Convers., 33(2), 617-626. https://doi.org/10.1109/TEC.2017.2758382.
  17. Paris, P., Erdogan, F. and Kim, N. (1963), "A critical analysis of crack propagation laws", J. Basic Eng., 85(4), 528-533. http://doi.org/10.1109/isspit.2012.6621260.
  18. Spearman, C. (1904), "The proof and measurement of association between two things", Am. J. Psychol., 15(1), 72-101. https://doi.org/10.2307/1412159.
  19. Yang, F., Habibullah, M.S., Zhang, T., Xu, Z., Lim, P. and Nadarajan, S. (2016), "Health index-based prognostics for remaining useful life predictions in electrical machines", IEEE Trans. Ind. Electron., 63, 2633-2644. https://doi.org/10.1109/TIE.2016.2515054.
  20. Zhang, C., Pan, L., Wang, S., Wang, X. and Tomovic, M. (2018). "An accelerated life test model for solid lubricated bearings used in space based on time-varying dependence analysis of different failure modes", Acta Astronautica, 152, 352-359. https://doi.org/10.1016/j.actaastro.2018.08.027.