Advances in Energy Research

  • 제8권4호
  • /
  • Pages.223-231
  • /
  • 2022
  • /
  • 2287-6316(pISSN)
  • /
  • 2287-6324(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Formation of Al2O2 supported Ni2P based 3D catalyst for atmospheric deoxygenation of rubberwood sawdust

  • Pranshu Shrivastava (Thammasat University Research Unit in Bioenergy and Catalysis, Thammasat University)
  • 투고 : 2021.05.15
  • 심사 : 2022.07.27
  • 발행 : 2022.12.25
⟨ 이전 논문 다음 논문 ⟩

초록

An ex-situ gravitational fixed bed pyrolysis reactor was used over Al2O3 supported Ni2P based catalyst with various Ni/P molar ratios (0.5-2.0) and constant nickel loading of 5.37 mmol/g Al2O3 to determine the hydrodeoxygenation of rubberwood sawdust (RWS) at atmospheric pressure. The 3D catalysts formed were characterized structurally as well as acidic properties were determined by hydrogen-temperature programmed reduction (TPR). The Ni2P phase formed completely on Al2O3 for 1.5 Ni/P ratio, although lesser crystallite sizes of Ni2P were seen at Ni/P ratios less than 1.5. Additionally, it was shown that when nickel loading level increased, acidity increased and specific surface area dropped, probably because nickel phosphate is not easily converted to Ni2P. When Ni/P ratio was 1.5, Ni2P phase fully formed on Al2O3. The catalytic activity was explained in terms of impacts of reaction temperature and Ni/P molar ratio. At relatively high temperature of 450℃, the high-value deoxygenated produce was predominantly composed of n-alkanes. Based on the findings, it was suggested that hydrogenolysis, hydrodeoxygenation, dehydration, decarbonylation, and hydrogenation are all part of mechanism underlying hydrotreatment of RWS. In conclusion, the synthesized Ni2P/ Al2O3 catalyst was capable of deoxygenating RWS with ease at atmospheric pressure, primarily resulting in long chained (C9-C24) hydrocarbons and acetic acid.

키워드

과제정보

All experimental work were carried out at Thammasat University Research Unit in Bioenergy and Catalysis, Thammasat University, Klongluang, Pathumthani 12120, Thailand. Therefore, author is very grateful to Thammasat University to support this study.

참고문헌

  1. Cecilia, J.A., Infantes-Molina, A., Sanmartin-Donoso, J., Rodriguez-Aguado, E., Ballesteros-Plata, D. and Rodriguez-Castellon, E. (2016), "Enhanced HDO activity of Ni 2 P promoted with noble metals", Catalysis Sci. Technol., 6(19), 7323-7333. https://doi.org/10.1039/C6CY00639F.
  2. Chen, D., Ji, J., Jiang, Z., Ling, M., Jiang, Z. and Peng, X. (2020), "Molecular-confinement synthesis of subnano Fe/N/C catalysts with high oxygen reduction reaction activity and excellent durability for rechargeable Zn-Air batteries", J. Power Sources, 450, 227660. https://doi.org/10.1016/j.jpowsour.2019.227660.
  3. Peroni, M., Mancino, G., Barath, E., Gutierrez, O.Y. and Lercher, J.A. (2016), "Bulk and γ‑Al2O3-supported Ni2P and MoP for hydrodeoxygenation of palmitic acid", Appl. Catalysis B: Environ., 180, 301-311. https://doi.org/10.1016/j.apcatb.2015.06.042.
  4. Prins, R. and Bussell, M.E. (2012), "Metal phosphides: Preparation, characterization and catalytic reactivity", Catalysis Lett., 142(12), 1413-1436. https://doi.org/10.1007/s10562-012-0929-7.
  5. Santillan-Jimenez, E., Loe, R., Garrett, M., Morgan, T. and Crocker, M. (2018), "Effect of Cu promotion on cracking and methanation during the Ni-catalyzed deoxygenation of waste lipids and hemp seed oil to fuel-like hydrocarbons", Catalysis Today, 302, 261-271. https://doi.org/10.1016/j.cattod.2017.03.025.
  6. Shrivastava, P., Kumar, A., Tekasakul, P., Lam, S.S. and Palamanit, A. (2021), "Comparative investigation of yield and quality of bio-oil and biochar from pyrolysis of woody and non-woody biomasses", Energies, 14(4), 1092. https://doi.org/10.3390/en14041092.
  7. Xin, H., Guo, K., Li, D., Yang, H. and Hu, C. (2016), "Production of high-grade diesel from palmitic acid over activated carbon-supported nickel phosphide catalysts", Appl. Catalysis B: Environ., 187, 375-385. https://doi.org/10.1016/j.apcatb.2016.01.051.
  8. Zhao, Y.M., Zhang, P.C., Xu, C., Zhou, X.Y., Liao, L.M., Wei, P.J., Liu, E., Chen, H., He, Q. and Liu, J.G. (2020), "Design and preparation of Fe-N 5 catalytic sites in single-atom catalysts for enhancing the oxygen reduction reaction in fuel cells", ACS Applied Materials & Interfaces, 12(15), 17334-17342. https://doi.org/10.1021/acsami.9b20711.
  9. Zulkepli, S., Juan, J.C., Lee, H.V., Rahman, N.S.A., Show, P.L. and Ng, E.P. (2018), "Modified mesoporous HMS supported Ni for deoxygenation of triolein into hydrocarbon-biofuel production", Energ. Convers. Manage., 165, 495-508. https://doi.org/10.1016/j.enconman.2018.03.087.