DOI QR코드

DOI QR Code

Thermal performance investigation of enhanced receiver tube for concentrated solar collector

  • Mohammed Al-Harrasi (Department of Mechanical and Industrial Engineering, Sultan Qaboos University) ;
  • Afzal Husain (Department of Mechanical and Industrial Engineering, Sultan Qaboos University) ;
  • M. Zunaid (Department of Mechanical Engineering, Delhi Technological University)
  • 투고 : 2022.08.20
  • 심사 : 2022.09.07
  • 발행 : 2022.09.25

초록

This study presents an experimental investigation of conventional and enhanced receiver tube performance for the application of a concentrated parabolic trough collector (CPC). The CPC system is fabricated and tested for the conventional and enhanced receiver tubes. The experiments were performed on both tubes for the change of flow rates. The temperature rise of the tube surface, as well as working fluid, were monitored for varying flow rates. The results were compared and discussed in view of enhanced CPC system performance. The results exhibited that the temperature rise of the working fluid passing through the tube was more in the case of the enhanced tube compared to the conventional receiver tube under the same flow rates.

키워드

과제정보

The authors acknowledge the support from the Sultan Qaboos University, Oman, (Grant No. (IG/ENG/MEID/21/01) for conducting this research.

참고문헌

  1. Bellos, E., Tzivanidis, C. and Tsimpoukis, D. (2017), "Multi-criteria evaluation of parabolic trough collector with internally finned absorbers", Appl. Energ., 205, 540-561. https://doi.org/10.1016/j.apenergy.2017.07.141.
  2. Bitam, E.W., Demagh, Y., Hachicha, A.A., Benmoussa, H. and Kabar, Y. (2018) "Numerical investigation of a novel sinusoidal tube receiver for parabolic trough technology", Appl. Energ., 218, 494-510. https://doi.org/10.1016/j.apenergy.2018.02.177.
  3. Chang, C., Peng, X., Nie, B., Leng, G., Li, C., Hao, Y. and She, X. (2017), "Heat transfer enhancement of a molten salt parabolic trough solar receiver with concentric and eccentric pipe inserts", Energ. Procedia. 142, 624-629. https://doi.org/10.1016/j.egypro.2017.12.103.
  4. Eiamsa-ard, S. and Promvonge, P. (2011), "Influence of double-sided delta-wing tape insert with alternateaxes on flow and heat transfer characteristics in a heat exchanger tube", Chinese J. Chem. Eng., 19(3), 410-423. https://doi.org/10.1016/S1004-9541(11)60001-3.
  5. Epstein, P.R. et al. (2011), "Full cost accounting for the life cycle of coal", Ecol. Econ. Rev., 1219(1), 73-98. https://doi.org/10.1111/J.1749-6632.2010.05890.X/PDF.
  6. Fuqiang, W., Zhexiang, T., Xiangtao, G., Jianyu, T., Huaizhi, H. and Bingxi, L. (2016), "Heat transfer performance enhancement and thermal strain restrain of tube receiver for parabolic trough solar collector by using asymmetric outward convex corrugated tube", Energy, 114, 275-292. https://doi.org/10.1016/j.energy.2016.08.013.
  7. Huang, Z., Li, Z.Y., Yu, G.L. and Tao, W.Q. (2017), "Numerical investigations on fully-developed mixed turbulent convection in dimpled parabolic trough receiver tubes", Appl. Therm. Eng., 114, 1287-1299. https://doi.org/10.1016/j.applthermaleng.2016.10.012.
  8. Jaramillo, O.A., Borunda, M., Velazquez-Luchod, K.M. and Roblesa, M. (2016), "Parabolic trough solar collector for low enthalpy processes: An analysis of the efficiency enhancement by using twisted tape inserts", Renew. Energ., 93, 125-141. https://doi.org/10.1016/j.renene.2016.02.046.
  9. Li, X., Meng, J. and Guo, Z. (2009), "Turbulent flow and heat transfer in discrete double inclined ribs tube", Int. J. Heat Mass Transfer., 52(3-4), 962-970. https://doi.org/10.1016/j.ijheatmasstransfer.2008.07.027.
  10. Loni, R., Ghobadian, B., Kasaeian, A.B., Akhlaghi, M.M., Bellos, E. and Najafi, G. (2020) "Sensitivity analysis of parabolic trough concentrator using rectangular cavity receiver", Appl. Therm. Eng., 169. https://doi.org/10.1016/j.applthermaleng.2020.114948.
  11. Mwesigye, A., Bello-Ochende, T. and Meyer, J.P. (2014), "Heat transfer and thermodynamic performance of a parabolic trough receiver with centrally placed perforated plate inserts", Appl. Energ., 136, 989-1003. https://doi.org/10.1016/j.apenergy.2014.03.037.
  12. Promvonge, P. (2008), "Heat transfer behaviors in round tube with conical ring inserts", Energ. Conversion Manage., 49(1), 8-15. https://doi.org/10.1016/j.enconman.2007.06.009.
  13. Promvonge, P., Chompookham, T., Kwankaomeng, S. and Thianpong, C. (2010), "Enhanced heat transfer in a triangular ribbed channel with longitudinal vortex generators", Energ. Conversion Manage., 51(6), 12421249. https://doi.org/10.1016/j.enconman.2009.12.035.
  14. Ravi Kumar, K. and Reddy, K.S. (2009), "Thermal analysis of solar parabolic trough with porous disc receiver", Appl. Energ., 86(9), 1804-1812. https://doi.org/10.1016/j.apenergy.2008.11.007.
  15. Reddy, K.S. and Satyanarayana, G.V. (2008), "Numerical study of porous finned receiver for solar parabolic trough concentrator", Eng. Appl. Comput. Fluid Mech., 2(2), 172-184. https://doi.org/10.1080/19942060.2008.11015219.
  16. Sheikholeslami, M., Gorji-bandpy, M. and Domiri, D. (2015), "Review of heat transfer enhancement methods : Focus on passive methods using swirl flow devices", 49, 444-469. https://doi.org/10.1016/j.rser.2015.04.113.
  17. Torii, K., Kwak, K.M. and Nishino, K. (2002), "Heat transfer enhancement accompanying pressure-loss reduction with winglet-type vortex generators for fin-tube heat exchangers", Int. J. Heat Mass Transfer, 45(18), 3795-3801. https://doi.org/10.1016/S0017-9310(02)00080-7.