DOI QR코드

DOI QR Code

Experimental assessment of post-earthquake retrofitted reinforced concrete frame partially infilled with fly-ash brick

  • Kumawat, Sanjay R. (School of Infrastructure, Indian Institute of Technology Bhubaneshwar) ;
  • Mondal, Goutam (School of Infrastructure, Indian Institute of Technology Bhubaneshwar) ;
  • Dash, Suresh R. (School of Infrastructure, Indian Institute of Technology Bhubaneshwar)
  • 투고 : 2021.06.29
  • 심사 : 2021.10.12
  • 발행 : 2022.02.25

초록

Many public buildings such as schools, hospitals, etc., where partial infill walls are present in reinforced concrete (RC) structures, have undergone undesirable damage/failure attributed to captive column effect during a moderate to severe earthquake shaking. Often, the situation gets worsened when these RC frames are non-ductile in nature, thus reducing the deformable capability of the frame. Also, in many parts of the Indian subcontinent, it is mandatory to use fly-ash bricks for construction so as to reduce the burden on the disposal of fly-ash produced at thermal power plants. In some scenario, when the non-ductile RC frame, partially infilled by fly-ash bricks, suffers major structural damage, the challenge remains on how to retrofit and restore it. Thus, in this study, two full-scale one-bay, one-story non-ductile RC frame models, namely, bare frame and RC partially infilled frame with fly-ash bricks in 50% of its opening area are considered. In the previous experiments, these models were subjected to slow-cyclic displacement-controlled loading to replicate damage due to a moderate earthquake. Now, in this study these damaged frames were retrofitted and an experimental investigation was performed on the retrofitted specimens to examine the effectiveness of the proposed retrofitting scheme. A hybrid retrofitting technique combining epoxy injection grouting with an innovative and easy-to-implement steel jacketing technique was proposed. This proposed retrofitting method has ensured proper confinement of damaged concrete. The retrofitted models were subjected to the same slow cyclic displacement-controlled loading which was used to damage the frames. The experimental study concluded that the hybrid retrofitting technique was quite effective in enhancing and regaining various seismic performance parameters such as, lateral strength and lateral stiffness of partially fly-ash brick infilled RC frame. Thus, the steel jacketing retrofitting scheme along with the epoxy injection grouting can be relied on for possible repair of the structural members which are damaged due to the captive column effect during the seismic shaking.

키워드

과제정보

This work was financially supported by the Ministry of Human Resource Development, Government of India.

참고문헌

  1. Altin, S., Anil, O., Kara, M.E. and Kaya, M. (2008), "An experimental study on strengthening of masonry infilled RC frames using diagonal CFRP strips", Compos Part BEng, 39(4), 680-693. https://doi.org/10.1016/j.compositesb.2007.06.001.
  2. ASTM (2018), Standard Test Methods for Compressive Strength of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes, ASTM C 579, ASTM International, U.S.A.
  3. Basha, S.H. and Kaushik, H.B. (2016), "Suitability of fly ash brick masonry as infill in reinforced concrete frames," Mater. Struct., 49(9), 3831-3845. https://doi.org/10.1617/s11527-015-0757-5.
  4. BIS (1959), Method of Tests for Strength of Concrete, IS:516-1959 (reaffirmed 2004), Bureau of Indian Standards, New Delhi, India.
  5. BIS (1987), Code of Practice for Structural use of Unreinforced Masonry, IS:1905-1987 (reaffirmed 2002), Third Revision, Bureau of Indian Standards, New Delhi, India.
  6. BIS (1988), Methods of Physical Tests for Hydraulic Cement, Part 6: Determination of Compressive Strength of Hydraulic Cement (Other than Masonry Cement), IS:4031-PART 6-1988 (reaffirmed 2005), Bureau of Indian Standards, New Delhi, India.
  7. BIS (1992), Methods of Tests of Burnt Clay Building Bricks, Part 1: Determination of Compressive Strength, IS: 3495-Part 1-1992 (reaffirmed 2002), Bureau of Indian Standards, New Delhi, India.
  8. BIS (2000), Plain and Reinforced Concrete - Code of Practice, IS-456, Bureau of Indian Standards, New Delhi, India.
  9. BIS (2005), Metallic Materials-Tensile Testing at Ambient Temperature, IS:1608-2005, Third Revision, Bureau of Indian Standards, New Delhi, India.
  10. Chang, C., Kim, S.J., Park, D. and Choi, S. (2014), "Experimental investigation of reinforced concrete columns retrofitted with polyester sheet", Earthq. Struct., 6(3), 237-250. https://doi.org/10.12989/eas.2014.6.3.237.
  11. Darbhanzi, A., Marefat, M.S., Khanmohammadi, M., Moradimanesh, A. and Zare, H. (2018), "Seismic performance of retrofitted URM walls with diagonal and vertical steel strips", Earthq. Struct., 14(5), 449-458. https://doi.org/10.12989/eas.2018.14.5.449.
  12. El-Amoury, T. and Ghobarah, A. (2002), "Seismic rehabilitation of beam-column joint using GFRP sheets", Eng. Struct., 24(11), 1397-1407. https://doi.org/10.1016/S0141-0296(02)00081-0.
  13. Esmaeeli, E., Barros, J.A., Sena-Cruz, J., Fasan, L., Prizzi, F.R., Melo, J. and Varum, H. (2015), "Retrofitting of interior RC beam-column joints using CFRP strengthened SHCC: cast-in-place solution", Compos Struct., 122, 456-467. https://doi.org/10.1016/j.compstruct.2014.12.012.
  14. Faleschini, F., Gonzalez-Libreros, J., Zanini, M.A., Hofer, L., Sneed, L. and Pellegrino, C. (2019), "Repair of severely-damaged RC exterior beam-column joints with FRP and FRCM composites", Compos. Struct., 20(7), 352-363. https://doi.org/10.1016/j.compstruct.2018.09.059.
  15. Garcia, R., Jemaa, Y., Helal, Y., Guadagnini, M. and Pilakoutas, K. (2014), "Seismic strengthening of severely damaged beam-column RC joints using CFRP", J. Compos. Constr., 18(2), 04013048. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000448.
  16. Hadi, M.N. and Tran, T.M. (2014), "Retrofitting nonseismically detailed exterior beam-column joints using concrete covers together with CFRP jacket", Constr. Build. Mater., 63, 161-173. https://doi.org/10.1016/j.conbuildmat.2014.04.019.
  17. Hadigheh, S.A., Mahini, S.S. and Maheri, M.R. (2014), "Seismic behavior of FRP-retrofitted reinforced concrete frames", J. Earthq. Eng., 18(8), 1171-1197. https://doi.org/10.1080/13632469.2014.926301.
  18. Jayaguru, C. and Subramanian, K. (2012), "Retrofit of RC frames with captive-column defects", KSCE J. Civil Eng. 16(7), 1202-1208. https://doi.org/10.1007/s12205-012-1019-5.
  19. Karayannis, C.G. and Golias, E. (2018), "Full scale tests of RC joints with minor to moderate seismic damage repaired using C-FRP sheets", Earthq. Struct., 15(6), 617-627. https://doi.org/10.12989/eas.2018.15.6.617.
  20. Kaushik, A., Mondal, G. and Dash, S.R. (2018), "Evaluation of lateral response of partially infill walls with fly-ash bricks through experimental study", M.Tech thesis, School of Infrastructure, Indian Institute of Technology Bhubaneswar, India.
  21. Kumawat, S.R., Mondal, G. and Dash, S.R. (2020), "Evaluation of post-earthquake retrofitted partially infilled reinforced concrete frame", M.Tech thesis, School of Infrastructure, Indian Institute of Technology Bhubaneswar, India.
  22. Kumbasaroglu, A. and Budak, A. (2016), "An experimental study on impact of anchor bars at the steel frames with infilled walls", Challenge J. Struct. Mech., 2(2), 129-138. https://doi.org/10.20528/cjsmec.2016.06.016.
  23. Kumbasaroglu, A., Yalciner, H. and Aydin, Y.F. (2017), "The effect of infill wall frames on seismic performance levels of reinforced concrete buildings", Int. Conf. Struct. Eng. Dynam., Ericeira, Portugal, July.
  24. Muduli, N., Dash, S.R. and Mondal, G. (2020), "Review of seismic performances of partial infill RC frames", Adv. Comput. Meth. Geomech., 56, 577-589. https://doi.org/10.1007/978-981-15-0890-5_48.
  25. Park, R. (1989), "Evaluation of ductility of structures and structural assemblages from laboratory testing", B. New Zealand Natl. Soc. Earthq. Eng., 22(3), 155-166. https://doi.org/10.5459/bnzsee.22.3.155-166.
  26. Ro, K.M., Kim, M.S. and Lee, Y.H. (2020), "Experimental study on seismic retrofitting of reinforced concrete frames using welded concrete-filled steel tubes", Appl. Sci., 10(20), 7061. https://doi.org/10.3390/app10207061.
  27. Sasmal, S., Ramanjaneyulu, K., Novak, B., Srinivas, V., Kumar, K.S., Korkowski, C., Roehm, C., Lakshmanan, N. and Iyer, N.R. (2011), "Seismic retrofitting of nonductile beam-column sub-assemblage using FRP wrapping and steel plate jacketing", Constr. Build. Mater., 25(1), 175-182. https://doi.org/10.1016/j.conbuildmat.2010.06.041.
  28. Soltanzadeh, G., Osman, H.B., Vafaei, M. and Vahed, Y.K. (2018), "Seismic retrofit of masonry wall infilled RC frames through external post-tensioning", B. Earthq. Eng., 16(3), 1487-1510. https://doi.org/10.1007/s10518-017-0241-4.
  29. Srechai, J., Leelataviwat, S., Wongkaew, A. and Lukkunaprasit, P. (2017), "Experimental and analytical evaluation of a low-cost seismic retrofitting method for masonry-infilled non-ductile RC frames", Earthq. Struct., 12(6), 699-712. https://doi.org/10.12989/eas.2017.12.6.699.
  30. Tawfik, A.S., Mohamed, R.B. and Ashraf, E.Z. (2014), "Behavior and ductility of high strength reinforced concrete frames", HBRC J., 10(2), 215-221. https://doi.org/10.1016/j.hbrcj.2013.11.005.
  31. Tsonos, A.G. (2008), "Effectiveness of CFRP-jackets and RC-jackets in post-earthquake and pre-earthquake retrofitting of beam-column sub assemblages", Eng. Struct., 30(3), 777-793. https://doi.org/10.1016/j.engstruct.2007.05.008.
  32. Yuen, T.Y.P., Kuang, J.S. and Ali, B.S.M. (2016), "Assessing the effect of bi-directional loading on nonlinear static and dynamic behaviour of masonryinfilled frames with openings", B. Earthq. Eng., 14(6), 1721-1755. https://doi.org/10.1007/s10518-016-9899-2.
  33. Yuksel, E., Ozkaynak, H., Buyukozturk, O., Yalcin, C., Dindar, A.A., Surmeli, M. and Tastan, D. (2010), "Performance of alternative CFRP retrofitting schemes used in infilled RC frames", Constr. Build. Mater., 24(4), 596-609. https://doi.org/10.1016/j.conbuildmat.2009.09.005.