DOI QR코드

DOI QR Code

Incomplete fabrication effects on represtressing preflex girders encased in concrete

  • Jeong, Euisuk (Dept. of Civil and Environmental Engineering, South Dakota State Univ.) ;
  • Lee, Hwan-Woo (Department of Civil Engineering, Pukyong National University) ;
  • Lee, Jaeha (Major of Civil Engineering, Korea Maritime and Ocean University)
  • 투고 : 2021.08.17
  • 심사 : 2022.04.06
  • 발행 : 2022.04.10

초록

In the current study, ordinary design of Represstessed Pre-Flex (RPF) girder by classical beam theory and numerical model taking buckled shape into consideration were compared with field-survey data to find imperfections on the RPF girder before prestressing and after preflexion. It should be noted that the ordinary design do not consider deformed shape of steel girder in RPF beam. The deformed shapes of steel girder due to the incomplete fabrication that could be caused by self-weight, preflexion misalignment, existence of lateral bracing at mid-span and stiffness of reaction frame were found using a newly developed model which was verified against a deformation survey conducted on actual RPF girder in the field. The final observed deformed shapes of RPF after concrete shrinkage and before prestressing were classified into W, C and Unsymmetric shapes in regard to both survey and analytical results. The deformation survey showed negligible amount of unwanted deformation compared to the large size of the RPF girders. The shallower width of the bottom flange of steel girder caused amount of lateral torsional buckling under self-weight and preflexion thereby affecting the unwanted final overall shape of the RPF girders. However, it was found that the unwanted deformation of RPF girders by fabrication errors even though it is negligible compared to the size of the girder, caused unsymmetrical stress contours in concrete and additional tensile stress and raise some safety issues.

키워드

과제정보

The research described in this paper was financially supported by the National Research Foundation of Korea (2021R1I1A3044831).

참고문헌

  1. ABAQUS/Standard: User's Manual (2018), Hibbitt Karlsson and Sorenson Inc., Pawtucket, R.I.
  2. Ahmadullah, N., Tetsuhiro, S. and Tai, M. (2017), "A Study on application of elastic theory for computing flexural stresses in preflex beam", Int. J. Struct. Construct. Eng., 11(10), 1364-1367. https://doi.org/10.5281/zenodo.1132351.
  3. Bae, D. and Lee, K.M. (2004), "Behavior of preflex beam in manufacturing process", KSCE J. Civil Eng., 8(1), 111-115. https://doi.org/10.1007/BF02829086.
  4. Baes, L. and Lipski, A. (1954), La Poutre Preflex, Fascicule 2: Notes de calcul, Notes Descriptives, Editions Desoer, Liege, Belgium.
  5. Bang, H.S., Joo, S.M. and An, H.Y. (2003), "A Study on the Analysis for Welding Residual Stress of Preflex Beam", J. Ocean Eng. Technol., 17(6), 65-71.
  6. Choi, B.H., Kim, T.B. and Park, S.K. (2017), "Flexural performance of multistage prestressed and self-weight preflex girder", J. Korean Soc. Steel Construct., 29(4), 311-321. https://doi.org/10.7781/kjoss.2017.29.4.311.
  7. KCI (2012), Concrete Structure Design Manual, Korea Concrete Institute, Seoul, Korea.
  8. Kim, K.S., Lee, D.H., Choi, S.M., Choi, Y.H., and Jung, S.H. (2011), "Flexural behavior of prestressed composite beams with corrugated web: Part I. Development and analysis", Compos. Part B: Eng., 42(6), 1603-1616. https://doi.org/10.1016/j.compositesb.2011.04.020.
  9. Kim, W., Jeong, Y. and Lee, J. (2018), "A design approach of integral-abutment steel girder bridges for maintenance", Steel Compos. Struct., 26(2), 227-239. https://doi.org/10.12989/scs.2018.26.2.227.
  10. Lee, D.J. (2009), A Study on the Problems and Alternative Method of Preflex Composite Girder, Woosong University, Daejeon, South Korea.
  11. Lee, J., Jeong, Y. and Kim, W. (2016), "Buckling behavior of steel girder in integral abutment bridges under thermal loadings in summer season during deck replacement", Int. J. Steel Struct., 16(4), 1071-1082. https://doi.org/10.1007/s13296-016-0023-x.
  12. Leo, F., Piotr, G. and Rostand, M.P. (2021), "Influence of fracture and delayed effects on steel-concrete composite structures. Fracture, Fatigue, Failure Damage Evolution, 3, 1-6.
  13. Memon, B.A. and Su, X. (2004), "Arc-length technique for nonlinear finite element analysis", J. Zhejiang Univ. SCIENCE A, 5(5), 618-628. https://doi.org/10.1631/jzus.2004.0618.
  14. MOLIT (2015), Railroad Design Manual, Korean Ministry of Land, Infrastructure and Transport, Seoul, Korea.
  15. MOLIT (2016), Korean Highway Bridge Design Code, Korean Ministry of Land, Infrastructure and Transport, Seoul, Korea.
  16. Nasiri, A. and Shimozato, T. (2021), "Durability of preflex beam under cyclic loading", Eng. Sci. Technol. Int. J., https://doi.org/10.1016/j.jestch.2021.03.003.
  17. Nasiri, A., Shimozato, T. and Mumtaz, Y. (2021), "Experimental study on the post-cracking behavior of preflex beams under cyclic loading", Structures, 29, 1390-1403. https://doi.org/10.1016/j.istruc.2020.12.023.
  18. Pap, Z.B. (2014), "PREFLEX girders: Prefabricated composite bridges", Bauhaus Summer School in Forecast Engineering: Global Climate Change and the Challenge for Built Environment, Weimar, Germany.
  19. Park, J., Kim, J., Zhang, A., Lee, H. and Park, S. (2015), "Embedded EM sensor for tensile force estimation of PS tendon of PSC girder", J. Comput. Struct. Eng. Institute of Korea, 28(6), 691-697. https://doi.org/10.7734/COSEIK.2015.28.6.691.
  20. Portela, G., Barajas, U. and Albarran-Garcia, J.A. (2011), Analysis and Load Rating of Pre-flex Composite Beams. ERDC/GSL TR-11-33, U.S. Army Engineer Research and Development Center, Geotechnical and Structures Laboratory, Vicksburg, MS, 89.
  21. Riks, E. (1972), "The Application of Newton's Method to the Problem of Elastic Stability." Journal of Applied Mechanics, 39(4), 1060-1065. https://doi.org/10.1115/1.3422829
  22. Riks, E. (1979). "An incremental approach to the solution of snapping and buckling problems", Int. J. Solids Struct., 15(7), 529-551. https://doi.org/10.1016/0020-7683(79)90081-7.
  23. Shin, K.J., Park, Y.U., Lee, S.C., Kim, Y.Y. and Lee, H.W. (2015), "Experimental evaluation of prestress force in tendons for prestressed concrete girders using sensors", J. Comput. Struct. Eng. Institute Korea, 28(6), 715-722. https://doi.org/10.7734/COSEIK.2018.31.2.115.
  24. Staquet, S., Rigot, G., Detandt, H. and Espion, B. (2004), "Innovative composite precast prestressed precambered U-shaped concrete deck for Belgium's high speed railway trains", PCI J., 49(6), 94-113. https://doi.org/10.15554/pcij.11012004.94.113.
  25. Tian, L.J., Li, Z., Yang, M., Chang, S. and Qian, J.Q. (2020), "Lateral tosianal buckling strength of steel I-beams within preflexed beams in pre-bending stage", Adv. Steel Construct., 16(1), 47-54. https://doi.org/10.18057/IJASC.2020.16.1.6.
  26. Wan, L. and Gao, Q. (2017), "Finite Element Analysis (FEA) analysis of the preflex beam", In AIP Conference Proceedings, 1890(1), 040118. https://doi.org/10.1063/1.5005320.
  27. Wempner, G.A. (1971), "Discrete approximations related to nonlinear theories of solids", Int. J. Solids Struct., 7(11), 1581-1599. https://doi.org/10.1016/0020-7683(71)90038-2.