DOI QR코드

DOI QR Code

Comparative study on the structural behavior of a transition piece for offshore wind turbine with jacket support

  • Ma, Chuan (School of Civil, Environmental and Architectural Engineering, Korea University) ;
  • Zi, Goangseup (School of Civil, Environmental and Architectural Engineering, Korea University)
  • 투고 : 2021.12.31
  • 심사 : 2022.04.17
  • 발행 : 2022.05.10

초록

As a key reinforcement connection between a tower and a substructure in offshore wind turbine system, the transition piece is inevitably subjected to cyclic dynamic environmental loads such as wind, current and wave. Therefore, well designed transition piece with high strength and good fatigue resistance is of great significance to the structural safety and reliability of offshore wind power systems. In this study, the structural behavior of the transition piece was studied by an extensive sets of finite element analyses. Three widely used types of transition piece were considered. The characteristics of stress development, fatigue life and weight depending on the type of the transition piece were investigated in the ultimate limit state (ULS) and the fatigue limit state (FLS) of a 5-MW offshore wind turbine to be placed in Korea. An optimal form of the transition piece was proposed based on this parametric study.

키워드

과제정보

This work was supported by the National Research Foundation of Korea (NRF) grant funded by the Korea government (MSIT) (No. NRF-2021R1A5A1032433) and the Chinese Government Scholarship of China Scholarship Council (CSC) (No. 202006450022).

참고문헌

  1. BS EN 10025-2:2019 (2019), Hot Rolled Products of Structural Steels-Part 2: Technical Delivery Conditions for Non-Alloy Structural Steels, British Standards Institution, BSI, UK. https://www.modiranahan.com/uploads/pdf/BS_EN_10025_2_2019.pdf
  2. Dalhoff, P., Argyriadis, K. and Klose, M. (2007), "Integrated load and strength analysis for offshore wind turbines with jacket structures", Proceedings of European Offshore Wind Energy Conference and Exhibition, Berlin, Germany https://onepetro.org/ISOPEIOPEC/proceedingsabstract/ISOPE07/All-ISOPE07/ISOPE-I-07-541/10592
  3. DNV-OS-J101 (2014), Design of Offshore Wind Turbine Structures. DNV Standard, Det Norske Veritas, DNV. https://rules.dnv.com/docs/pdf/dnvpm/codes/docs/2014-05/OsJ101.pdf
  4. DNV-RP-C203 (2010), Fatigue Design of Offshore Steel Structures. DNV Standards, Det Norske Veritas, DNV. https://www.doc88.com/p-7788646052639.html
  5. DNVGL-CG-0129 (2015), Fatigue Assessment of Ship Structures. DNV Standards, Det Norske Veritas, DNV. https://rules.dnv.com/docs/pdf/DNV/CG/2015-10/DNVGL-CG0129.pdf
  6. DNVGL-ST-0126 (2018), Support Structures for Wind Turbines. DNV Standards, Det Norske Veritas, DNV. https://rules.dnv.com/docs/pdf/DNV/ST/2018-07/DNVGL-ST0126.pdf
  7. DNVGL-ST-0437 (2016), Loads and Site Conditions for Wind Turbines. DNV Standards, Det Norske Veritas, DNV. https://rules.dnv.com/docs/pdf/DNV/ST/2016-11/DNVGL-ST0437.pdf
  8. Farhan, M., Mohammadi, M.R.S., Correia, J.A. and Rebelo, C. (2018), "Transition piece design for an onshore hybrid wind turbine with multiaxial fatigue life estimation", Wind Eng., 42(4), 286-303. https://doi.org/10.1177/0309524X18777322.
  9. Fischer, T., Vries, W.D., Rainey, P., Schmidt, B., Argyriadis, K., and Kuhn, M. (2012), "Offshore support structure optimization by means of integrated design and controls", Wind Energy, 15(1), 99-117. https://doi.org/10.1002/we.521.
  10. Gentils, T., Lin, W. and Kolios, A. (2017), "Integrated structural optimisation of offshore wind turbine support structures based on finite element analysis and genetic algorithm", Appl. Energy, 199, 187-204. https://doi.org/10.1016/j.apenergy.2017.05.009.
  11. Guo, X.H. and Wu, Z.A. (2020), "Numerical analysis of jacket transition section", China Offshore Platform, 35(6), 8. http://qikan.cqvip.com/Qikan/Article/Detail?id=7103595828.
  12. Han, C.S., Liu, K., Ma, Y.L., Qin, P.J. and Zou, T. (2021), "Multiaxial fatigue assessment of jacket-supported offshore wind turbines considering multiple random correlated loads", Renew. Energy, 169, 1252-1264 https://doi.org/10.1016/j.renene.2021.01.093.
  13. Huang, H., An, H., Ma, H. and Chen, S. (2018), "An engineering method for complex structural optimization involving both size and topology design variables", Int. J. Numer. Methods Eng., 117, 291-315. https://doi.org/10.1002/nme.5957.
  14. IEC-61400-3-1 (2019), Wind Energy Generation Systems-Part 3-1: Design Requirements for Fixed Offshore Wind Turbines. International Electrotechnical Commission, IEC. https://webstore.iec.ch/publication/29360.
  15. Jalbi, S. and Bhattacharya, S. (2020), "Concept design of jacket foundations for offshore wind turbines in 10 steps", Soil Dyn. Earthq. Eng., 139, 106357. https://doi.org/10.1016/j.soildyn.2020.106357.
  16. Jonkman, J.M., Butterfield, S., Musial, W. and Scott, G. (2009), Definition of a 5mw Reference Wind Turbine for Offshore System Development, NREL/TP-500-38060. Golden, CO: NREL. https://doi.org/10.2172/947422.
  17. Kim, J.Y., Oh, K.Y., Kang, K.S. and Lee, J.S. (2013), "Site selection of offshore wind farms around the Korean Peninsula through economic evaluation", Renew. Energy, 54, 189-195. https://doi.org/10.1016/j.renene.2012.08.026.
  18. Lee, J.H., Kim, S.Y., Kim, M.H., Shin, S.C. and Lee, Y.S. (2014), "Design optimization and reliability analysis of jacket support structure for 5-MW offshore wind turbine", J. Ocean Eng. Technol., 28(3), 218-226. https://doi.org/10.5574/KSOE.2014.28.3.218.
  19. Lee, Y.S., Choi, B.L., Lee, J.H., Kim, S.Y. and Han, S. (2014), "Reliability-based design optimization of monopile transition piece for offshore wind turbine system", Renew. Energy, 71(11), 729-741. https://doi.org/10.1016/j.renene.2014.06.017.
  20. Lee, Y.S., Gonzalez, J.A., Lee, J.H., Kim, Y.I., Park, K.C. and Han, S. (2016), "Structural topology optimization of the transition piece for an offshore wind turbine with jacket foundation", Renew. Energy, 85, 1214-1225. https://doi.org/10.1016/j.renene.2015.07.052.
  21. Lin, L. (2014), The Finite Element Analysis and Structural Optimization Design for Wind Turbine Foundation, Master Thesis, Tianjin University, Tianjin, Chain. http://cdmd.cnki.com.cn/article/cdmd-10217-1017243119.htm.
  22. Pan, Z.X., Wu, G.Y., Zhao, S.X. and He, Z. (2019), "Topology optimization method for transition pieces of offshore jacket wind turbine foundations", China Offshore Platform, 30(4), 6-13. https://doi.org/10.1016/j.renene.2015.07.052.
  23. Plodpradit, P., Dinh, V.N. and Kim, K.D. (2019), "Tripod-supported offshore wind turbines: modal and coupled analysis and a parametric study using X-SEA and FAST", J. Mar. Sci. Eng., 7(6), 181. https://doi.org/10.3390/jmse7060181.
  24. Schaffer, W., Seo, J., Choi, E. and Lee, J. (2020), "Optimized retrofit design of in-service monopile foundation offshore wind turbine transition zone", Eng. Struct., 220, 111001. https://doi.org/10.1016/j.engstruct.2020.111001.
  25. Seidel, M. (2007), "Jacket substructures for the REpower 5M wind turbine", Proceedings of the European Offshore Wind Energy Conference, Berlin, Germany. https://citeseerx.ist.psu.edu/viewdoc/download?doi=10.1.1.452.9225&rep=rep1&type=pdf.
  26. Tian, M.J. (2013), A Study on Fatigue Analysis Method of Support Structures for Offshore Wind Turbines, Master Thesis, Dalian University of Technology, Dalian, China. http://cdmd.cnki.com.cn/Article/CDMD-101411013201714.htm.
  27. Tian, X.Y., Li, X.D., Liu, G.J., Xie, Y.C. and Len, D.X. (2019), "Research on optimal design of jacketed offshore wind turbine support structure", 19th China Ocean (Shore) Engineering Symposium, Chongqing, China, 238-242. https://kns.cnki.net/KCMS/detail/detail.aspx?dbcode=CPFD&filename=HYGC201910001035.
  28. Vuong, N.V. and Quan, M.H. (2019), "Fatigue analysis of jacket support structure for offshore wind turbines", STCE, 13(1), 46-59. https://doi.org/10.31814/stce.nuce2019-13(1)-05.
  29. Wei, S., Park, H., Han, J., Na, S. and Kim, C. (2013), "A study on the effect of different modeling parameters on the dynamic response of a jacket-type offshore wind turbine in the Korean southwest sea", Renew. Energy, 58, 50-59. https://doi.org/10.1016/j.renene.2013.03.010.
  30. Wu, X.N., Hu, Y., Li, Y., Yang, J., Duan, L. and Wang, T.G. (2019), "Foundations of offshore wind turbines: A review", Renew. Sust. Energ. Rev., 104, 379-393. https://doi.org/10.1016/j.rser.2019.01.012.
  31. Ye, Y.P., Gu, S.T., Liu, M. and Feng, Z.Q. (2021), "Optimization software development for offshore turbine transition structures based on LiToSim", Appl. Math. Mech., 42(5), 11. https://doi.org/10.21656/1000-0887.410354.
  32. Young, W.C. and Budynas R.G. (2003), Roark's Formulas for Stress and Strain, McGraw-Hill. http://materiales.azc.uam.mx/gjl/Clases/MA10_I/Roark's%20formulas%20for%20stress%20and%20strain.pdf.