DOI QR코드

DOI QR Code

Multiaxial fatigue behaviors of open-rib to crossbeam joints in orthotropic bridge structures

  • Yang, Haibo (College of Water Conservancy and Civil Engineering, Shandong Agricultural University) ;
  • Qian, Hongliang (School of Ocean Engineering, Harbin Institute of Technology at Weihai) ;
  • Wang, Ping (School of Ocean Engineering, Harbin Institute of Technology at Weihai) ;
  • Dong, Pingsha (Department of Mechanical Engineering, University of Michigan) ;
  • Berto, Fillipo (Department of Engineering Design and Materials, Norwegian University of Science and Technology)
  • 투고 : 2021.10.22
  • 심사 : 2022.03.29
  • 발행 : 2022.03.25

초록

The fatigue behavior of welded open rib-to crossbeam joints (ORCJ) in orthotropic bridge structures is investigated using a traction structural stress method. The fatigue behaviors of welded open rib-to crossbeam joints have been a subject of study for decades for ensuring operational safety and future design improvement. A mesh-insensitive combination of traction structural stresses in ORCJ was obtained considering the effect of in-plane shear stress and validated by fatigue test results. The proposed method is advantageous for predicting fatigue cracks that initiate from the crossbeam cutout and propagate along the crossbeam. The investigations carried out with the proposed approach reveal that the normal structural stress decreases with the propagation of fatigue cracks, while the ratio of shear stress to normal stress increases. The effect of shear structural stress is significant for the analysis of fatigue behavior of ORCJ in multiaxial stress states.

키워드

과제정보

This research was funded by the National Key R & D Program of China (No.2019YFB1600702) and Natural Science Foundation of China (Grant No. 51678191 and No. 51605116).

참고문헌

  1. Abdullah, F. (2016), "Optimizing rib width to height and rib spacing to deck plate thickness ratios in orthotropic decks", Cogent Eng. 3(1), http://doi.org.10.1080/23311916.2016.1154703.
  2. ANSYS (2016), Engineering Software Inc. https://www.ansys.com
  3. Aygul, M., Al-emrani, M. and Urushadze, S. (2012), "Modelling and fatigue life assessment of orthotropic bridge deck details using FEM", Int. J. Fatigue, 40, 129-142. https://doi.org/10.1016/j.ijfatigue.2011.12.015 .
  4. Sonsino, C.M., Bruder, T. and Baumgartner, J. (2010), "SN lines for welded thin joints-suggested slopes and FAT values for applying the notch stress concept with various reference radii", Welding iWorld, 54(11), R375-R392. https://doi.org/10.1007/BF03266752.
  5. Sonsino, C.M., Fricke, W., De Bruyne, F., Hoppe, A., Ahmadi, A. and Zhang, G. (2012), "Notch stress concepts for the fatigue assessment of welded joints-Background and applications", Int. J. Fatigue, 34(1), 2-16. https://doi.org/10.1016/j.ijfatigue.2010.04.011.
  6. De Corte, Wouter (2007), "Improvements to the analysis of floor beams with additional web cutouts for orthotropic plated decks with closed continuous ribs", Steel Compos. Struct., 7(1), 1-18. https://doi.org/10.12989/scs.2007.7.1.001.
  7. Dong P (2001), "A structural stress definition and numerical implementation for fatigue analysis of welded joints", Int. J. Fatigue, 23(10), 865-876. https://doi.org/10.1016/S0142-1123(01)00055-X.
  8. Dong, P., Wei, Z. and Hong, J.K. (2009), "A path-dependent cycle counting method for variable-amplitude multiaxial loading", Int. J. Fatigue, 32(4), 720-734. https://doi.org/10.1016/j.ijfatigue.2009.10.010.
  9. E. Bernatowska, D. Len, and L. Sleczka (2019), "Comparative study of fatigue life assessment made by different approaches." Proceedings of CEE 2019 : Advances in Resource-Saving Technologies and Materials in Civil and Environmental Engineering, Lecture Notes in Civil Engineering, 47, 428-435. http://doi.org/10.1007/978-3-030-27011-7_54
  10. Eurocode 3 (2006), Design of Steel Structures. Part 2: Steel Bridges, European Committee for Standardization; Brussels, Belgium.
  11. Fettahoglu, A. (2015), "Effect of a crossbeam on stresses revealed in orthotropic steel bridges", Steel Compos. Struct., 18(1), 149-163. http://doi.org/10.12989/scs.2015.18.1.149.
  12. Ibrahim Al Z., Buick D. and Luca S. (2019), "Nominal and local stress quantities to design aluminum-to-steel thin welded joints against fatigue", Int. J. Fatigue, 123, 279-295. https://doi.org/10.1016/j.ijfatigue.2019.02.018.
  13. Jiang, W., Chen, W., Woo, W., Tu, S.T., Zhang, X.C. and Em, V. (2018), "Effects of low-temperature transformation and transformation-induced plasticity on weld residual stresses: Numerical study and neutron diffraction measurement", Mater. Des., 147, 65-79. https://doi.org/10.1016/j.matdes.2018.03.032.
  14. Jin, Q., Jiang, W., Gu, W., Wang, J., Li, G., Pan, X. and Tu, S.T. (2021), "A primary plus secondary local PWHT method for mitigating weld residual stresses in pressure vessels", Int. J. Pressure Vessels Piping, 192, 104431. https://doi.org/10.1016/j.ijpvp.2021.104431.
  15. Jorg B. (2017), "Review and considerations on the fatigue assessment of welded joints using reference radii", Int. J. Fatigue, 101, 459-468, https://doi.org/10.1016/j.ijfatigue.2017.01.013.
  16. Jin, Q., Jiang, W., Gu, W., Wang, J., Li, G., Pan, X. and Tu, S. T. (2021), "A primary plus secondary local PWHT method for mitigating weld residual stresses in pressure vessels", Int. J. Pressure Vessels Piping, 192, 104431. https://doi.org/10.12989/scs.2018.28.3.319.
  17. Kainuma, S., Jeong, Y.S. and Ahn, J.H. (2015), "Stress distribution on the real corrosion surface of the orthotropic steel bridge deck", Steel Compos. Struct., 18(6), 1479-1492. https://doi.org/10.12989/scs.2015.18.6.1479.
  18. Kim, M.H. and Kang, S.W. (2008), "Testing and analysis of fatigue behavior in edge details: A comparative study using hot spot and structural stresses", Kyobu Geka Japan. J. Thoracic Surgery, 61(4), 2351-2363. http://dx.doi.org/10.1175/JAS3365.1
  19. Masahiro S. (2007), Report of Subcommittee on Investigation and Research of Thick Plate Melting, Research Report No. 55693, Civil Engineering Society Steel Structure Committee, Japan.
  20. Mei, J. and Dong, P. (2017), "An equivalent stress parameter for multiaxial fatigue evaluation of welded components including non-proportional loading effects", Int. J. Fatigue, 101(2), 297-311. https://doi.org/10.1016/j.ijfatigue.2017.01.006.
  21. Mei, J., Dong, P., Xing, S., Vasu, A., Ganamet, A., Chung, J. and Mehta, Y. (2021), "An overview and comparative assessment of approaches to multi-axial fatigue of welded components in codes and standards", Int. J. Fatigue, 146, 106144. https://doi.org/10.1016/j.ijfatigue.2021.106144.
  22. Nagy, W., Schotte, K., Van Bogaert, P. and De Backer, H. (2016), "Fatigue strength application of fracture mechanics to orthotropic steel decks", Adv. Struct. Eng., 19(11), 1696-1709. https://doi.org/10.1177/1369433216649383.
  23. O zler Karakas (2013), "Consideration of mean-stress effects on fatigue life of welded magnesium joints by the application of the Smith-Watson-Topper and reference radius concepts", Int. J. Fatigue, 49. https://doi.org/10.1016/j.ijfatigue.2012.11.007.
  24. O zler K. (2017), "Application of Neuber's effective stress method for the evaluation of the fatigue behavior of magnesium welds", Int. J. Fatigue, 101. https://doi.org/10.1016/j.ijfatigue.2016.10.023.
  25. Karakas, O., Baumgartner, J. and Susmel, L. (2020), "On the use of a fictitious notch radius equal to 0.3 mm to design against fatigue welded joints made of wrought magnesium alloy AZ31", Int. J. Fatigue, 139, 105747. https://doi.org/10.1016/j.ijfatigue.2020.105747.
  26. Karakas, O ., Zhang, G. and Sonsino, C.M. (2018), "Critical distance approach for the fatigue strength assessment of magnesium welded joints in contrast to Neuber's effective stress method", Int. J. Fatigue, 112, 21-35. https://doi.org/10.1016/j.ijfatigue.2018.03.004.
  27. Pei, X. and Dong, P. (2019), "An analytically formulated structural strain method for fatigue evaluation of welded components incorporating nonlinear hardening effects", Fatigue Fracture Eng. Mater. Struct., 42(1), 239-255. https://doi.org/10.1111/ffe.12900.
  28. Pei, X., Dong, P. and Kim, M.H. (2020), "A simplified structural strain method for low-cycle fatigue evaluation of girth-welded pipe components", Int. J. Fatigue, 139, 105732. https://doi.org/10.1016/j.ijfatigue.2020.105732.
  29. Pei, X., Dong, P. and Xing, S. (2019), "A structural strain parameter for a unified treatment of fatigue behaviors of welded components", Int. J. Fatigue, 124, 444-460. https://doi.org/10.1016/j.ijfatigue.2019.03.010.
  30. Pei, X., Ravi, S., Dong, P. and Li, X. (2022), "A multi-axial vibration fatigue evaluation procedure for welded structures in frequency domain", Mech. Syst. Signal Processing, 167, 108516. https://doi.org/10.1016/j.ymssp.2021.108516.
  31. Peng, W., Jiang, W., Sun, G., Yang, B., Shao, X. and Tu, S.T. (2022), "Biaxial residual stress measurement by indentation energy difference method: Theoretical and experimental study", Int. J. Pressure Vessels Piping, 195, 104573. https://doi.org/10.1016/j.ijpvp.2021.104573.
  32. Pfeil, M.S., Battista, R.C. and Mergulhao, A.J.R. (2005), "Stress concentration in steel bridge orthotropic decks", J. Construct. Steel Res., 61(8), 1172-1184. https://doi.org/10.1016/j.jcsr.2005.02.006.
  33. Shen, W., Yan, R., He, F. and Wang, S. (2018), "Multiaxial fatigue analysis of complex welded joints in notch stress approach", Eng. Fracture Mech., 204, 344-360. https://doi.org/10.1016/j.engfracmech.2018.10.035.
  34. Sim, H.B., Uang, C.M. and Sikorsky, C. (2009), "Effects of fabrication procedures on fatigue resistance of welded joints in steel orthotropic decks", J. Bridge Eng., 14(5), 366-373. https://doi.org/10.1061/(ASCE)1084-0702(2009)14:5(366).
  35. Sonsino C.M. (1995), "Multiaxial fatigue of welded joints under in-phase and out-of-phase local strains and stresses", Int. J. Fatigue, 17(1), 55-70. https://doi.org/10.1016/0142-1123(95)93051-3.
  36. Tong L. and Shen Z., (1997), "Fatigue tests of orthotropic steel bridge decks with open-shaped longitudinal ribs", China J. Highway Transport, 03, 62-68. http://doi.org/10.19721/j.cnki.1001-7372.1997.03.010.
  37. Wang, P., Pei, X., Dong, P. and Song, S. (2019), "Traction structural stress analysis of fatigue behaviors of rib-to-deck joints in orthotropic bridge deck", Int. J. Fatigue, 125, 11-22. https://doi.org/10.1016/j.ijfatigue.2019.03.038.
  38. Wang, P. and Zheng, K. (2004), "Fatigue characteristics of orthotropic steel decks of railway bridges", World Bridges, 1, 44-48. http://doi.org/10.3969/j.issn.1671-7767.2004.01.012.
  39. Wei, Z., Jin, H., Pei, X. and Wang, L. (2021), "A simplified approach to estimate the fatigue life of full-scale welded cast steel thin-walled tubular structures", Thin-Walled Struct., 160, 107348. https://doi.org/10.1016/j.tws.2020.107348.
  40. Wei Z, Pei X, Jin H (2021), "Evaluation of welded cast steel joint fatigue data using structural stress methods," J Constr Steel Res, 186, 106895. https://doi.org/10.1016/j.jcsr.2021.106895.
  41. WOLCHUK R (1990), "Lessons from weld cracks in orthotropic decks on 3 European bridges", J. Struct. Eng.-ASCE, 116(1), 75-84. https://doi.org/10.1061/(ASCE)0733-9445(1990)116:1(75).
  42. Wouter Dennis C. and Philippe Van B. (2007), "Improvements to the analysis of floorbeams with additional web cutouts for orthotropic plated decks with closed continuous ribs", Steel Compos. Struct., 7(1), 1-18. https://doi.org/10.12989/scs.2007.7.1.001.
  43. Ya. S., Yamada, K. and Ishikawa, T. (2011), "Fatigue evaluation of rib-to deck welded joints of orthotropic steel bridge deck", J. Bridge Eng., 16(4), 492-499. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000181.
  44. Yang, H., Qian, H. and Wang, P. (2021), "Fatigue property analysis of U rib-to-crossbeam connections under heavy traffic vehicle load considering in-plane shear stress", Steel Compos. Struct., 38(3), 271-280. https://doi.org/10.1016/j.tafmec.2020.102889.
  45. Yang, H., Wang, P. and Qian, H. (2020), "Fatigue behavior of typical details of orthotropic steel bridges in multiaxial stress states using traction structural stress", Int. J. Fatigue, 141(12), 105862. https://doi.org/10.1016/j.ijfatigue.2020.105862.
  46. Yang, H., Wang, P. and Qian, H. (2022), "A Study of Fatigue Crack Propagation Paths at U-Rib Welds in Orthotropic Bridge Decks using a Phased-Array Imaging Technique", Theoretic. Appl. Fracture Mech., 119, 103310. https://doi.org/10.1016/j.tafmec.2022.103310.
  47. Yang, H., Wang, P. and Qian, H. (2022), "An experimental investigation into fatigue behaviors of single- and double-sided U rib welds in orthotropic bridge decks", Int. J. Fatigue, 159, 106827. https://doi.org/10.1016/j.ijfatigue.2022.106827.
  48. Yang, H., Wang, P. and Qian, H. (2021), "Fatigue property of U rib-crossbeam-deck connections in OBD under combined loading of bending and torsion", Theoretic. Appl. Fracture Mech., 112, 102889. http://dx.doi.org/10.12989/scs.2021.38.3.271.
  49. Ye, H., Xu, X., Qiang, S. and Hou, S. (2012), "Fatigue design parameters for orthotropic steel decks of single plane cable-stayed bridges", J. Southwest Jiaotong Univ. http://doi.org/10.3969/j.issn.0258-2724.2012.03.005.
  50. Zhou, W., Dong, P. and O zler, K. (2020), "Evaluation of magnesium weldment fatigue data using traction and notch stress methods", Int. J. Fatigue, 138, 105695. https://doi.org/10.1016/j.ijfatigue.2020.105695.