DOI QR코드

DOI QR Code

Stiffening schemes for CFS built-up I-beams with large global imperfections: Capacity and behaviour

  • Dar, M. Adil (Department of Civil and Environmental Engineering, National University of Singapore) ;
  • Anbarasu M. (Department of Civil Engineering, Government College of Engineering Salem) ;
  • Dar, A.R. ;
  • Islam, Naqeeb Ul (Department of Civil Engineering, National Institute of Technology Srinagar) ;
  • Ghowsi, Ahmad Fayeq (Department of Civil Engineering, Indian Institute of Technology Delhi) ;
  • Carvalho, Hermes (Department of Structural Engineering, Federal University of Minas Gerais)
  • 투고 : 2021.06.10
  • 심사 : 2022.02.02
  • 발행 : 2022.02.25

초록

Cold-formed steel (CFS) sections are thin-walled, therefore, more susceptible to different types of geometric imperfections. Global type of geometric imperfections has a significant impact on the load-carrying capacity of flexural members. This paper reports an experimental study that discusses the influence of global imperfections on the flexural response of CFS built-up I-beams composed of two lipped channels, with simply supported ends, under four-point loading. Global imperfections of magnitude over eight times the maximum permissible ones were induced in the specimens, leading to their distress. Using various simple stiffening schemes, the capacity and stiffness of the distressed specimens were improvised. The performance comparisons were made based on the maximum loads resisted, flexural stiffnesses offered, and failure modes experienced by the specimens. As experimental data on such distressed specimens are currently lacking in the literature, the test results of the present study will provide the necessary data needed by future researchers to numerically extend this study further, which will help in the development of necessary design guidelines for the same. The stiffening schemes significantly improved the structural efficiency of distressed specimens in terms of strength and stiffness, by over 60%. As a result, an effective and time-saving solution to such realistic structural engineering problems is given.

키워드

참고문헌

  1. Abu-Sena, A.B.B., Said, M., Zaki, M.A. and Dokmak, M. (2019), "Behavior of hollow steel sections strengthened with CFRP", Construct. Build. Mater. 205, 306-320. https://doi.org/10.1016/j.conbuildmat.2019.01.237.
  2. AISI S-100-2016 (2016), North American Specification for the Design of Cold-Formed Steel Structural Members, AISI Standard, Washington, DC, U.S.A.
  3. AISI S240-2015, (2015), North American Standard for Cold-Formed Steel Structural Farming, Washington, DC.
  4. Amoush, E.A. and Ghanem, M.A. (2018), "Axially loaded capacity of alternatively strengthened cold-formed channel columns with CFRP", J. Construct. Steel Res. 140, 139-152. https://doi.org/10.1016/j.jcsr.2017.10.022
  5. Selvaraj, S. and Madhavan, M. (2018), "Geometric imperfection measurements and validations on cold-formed steel channels using 3D noncontact laser scanner", J. Struct. Eng., 144(3), 04018010. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001993
  6. BS EN 1090-2 (2008), Execution of Steel Structures and Aluminum Structures. Technical requirements for steel structures
  7. Couto, C. and Real, P.V. (2021), "The influence of imperfections in the critical temperature of I-section steel members", J. Constr. Steel Res. 179, 106540. https://doi.org/10.1016/j.jcsr.2021.106540
  8. Dar, M.A., Dar, A.R., Yusuf, M. and Raju, J. (2015), "Experimental Study on Innovative Sections for Cold Formed Steel Beams", Steel Compo. Struct. 19(6), 1599-1610. http://dx.doi.org/10.12989/scs.2015.19.6.1599.
  9. Dar, M.A., Subramanian, N., Dar, A.R., Muheeb, M., Haseeb, M. and Mugees, T. (2019), "Structural efficiency of various strengthening schemes for cold-formed steel beams: Effect of global imperfections", Steel Compo. Struct. 30(4), 393-403. http://dx.doi.org/10.12989/scs.2019.30.4.393
  10. Dar, M.A., Subramanian, N., Dar, A.R. and Raju, J. (2017), "Rehabilitation of a Distressed Roof Truss - A Study", Struct. Eng. Mech. 62(5), 567-576. http://dx.doi.org/10.12989/sem.2017.62.5.567
  11. Dar, M.A., Subramanian, N., Mir, A., Dar, A.R., Anbarasu, M. and Lim, J.B.P. (2020), "Efficient cross-sectional profiling of built up CFS beams for improved flexural performance", Steel Compo. Struct. 34(3), 333-345. http://dx.doi.org/10.12989/scs.2020.34.3.333.
  12. Divahar, R. and Joanna, P.S. (2018), "Numerical simulation and experimental investigation on static behavior of cold formed steel beam with trapezoidally corrugated web by varying depth-thickness ratio", Asian J. Civ. Eng. 19, 121-137. https://doi.org/10.1007/s42107-018-0012-9.
  13. Dubina, D. and Ungureanu, V. (2002), "Effect of imperfections on numerical simulation of instability behaviour of cold-formed steel members", Thin-Walled Struct. 40, 239-262. https://doi.org/10.1016/S0263-8231(01)00046-5
  14. ECCS (European Convention for Constructional Steelwork) (1987), European Recommendations for the Design for the Design of Light Gauge Steel Members, Brussels, Belgium.
  15. El-Taly, B. and El-Shami, M. (2021), "Structural Performance of Cold-formed Steel Face-to-face and Back-to-back Beams", 19(12), Int. J. Civ. Eng. https://doi.org/10.1007/s40999-021-00606-y
  16. Fasoulakis, Z., Lignos, X.A., Avraam, T.P. and Katsatsidis, S.P. (2019), "Investigation on single-bolted cold-formed steel angles with geometric imperfections under compression", J. Constr. Steel Res. 162, 105733. https://doi.org/10.1016/j.jcsr.2019.105733
  17. Gatheeshgar, P., Poologanathan, K., Gunalan, S., Tsavdaridis, K.D., Nagaratnam, B. and Iacovidou, E. (2020), "Optimised cold-formed steel beams in modular building applications", J. Build. Eng. 32, 101607 https://doi.org/10.1016/j.jobe.2020.101607
  18. IS 1608-2005 (2005), Indian Standard- Metallic Materials - Tensile Testing at Ambient Temperature, Bureau of Indian Standards, New Delhi, India.
  19. IS 2062-2011 (2011), Indian Standard, Hot rolled medium and high tensile structural steel specification, Bureau of Indian Standards, New Delhi, India.
  20. IS 801-2010 (2010), Indian Standard- Code of Practice for Use of Cold Formed Light Gauge Steel Structural Members in General Building; Bureau of Indian Standards, New Delhi, India.
  21. Jiang, L., Yulin Feng, Wangbao Zhou and Binbin He, (2018), "Analysis on natural vibration characteristics of steel-concrete composite truss beam", Steel Compo. Struct. 26(1), 79-87. https://doi.org/10.12989/scs.2018.26.1.079.
  22. Kovacevic, S., Markovic, N., Sumarac, D. and Salatic, R. (2021), "Unfavorable geometric imperfections in steel plate girders subjected to localized loads", Thin-Walled Struct. 161, 107412. https://doi.org/10.1016/j.tws.2020.107412
  23. M. Ghannam, (2018), "Bending moment capacity of cold-formed steel built-up beams", Int. J. Steel Struct. 19(2), 660-671. https://doi.org/10.1007/s13296-018-0155-2.
  24. Ma, T. and Xu, L. (2020), "Effects of column imperfections on capacity of steel frames in variable loading", J. Constr. Steel Res. 165, 105819. https://doi.org/10.1016/j.jcsr.2019.105819
  25. Mageirou, G.E. and Lemonis, M.E. (2021), "Influence of imperfections on the progressive collapse of steel moment resisting frames", J. Constr. Steel Res. 183, 106744. https://doi.org/10.1016/j.jcsr.2021.106744
  26. Martins, C.H., Ferreira, F.P.V., Rossi, A. and Trentini, E.V.W. (2017), "Numerical analysis of physical and geometrical imperfections in cellular beams", Open J. Civ. Eng. 7, 116-129. https://doi.org/10.4236/ojce.2017.71007.
  27. Muftah, F., Sani, M.S.H.M. and Kamal, M.M.M. (2019), "Flexural Strength Behaviour of Bolted Built-Up Cold-Formed Steel Beam with Outstand and Extended Stiffener", Int. J. Steel Struct. 19(3),719-732 https://doi.org/10.1007/s13296-018-0157-0.
  28. Obst, M., Rodak, M. and Paczos, P. (2016), "Limit load of cold formed thin-walled nonstandard channel beams", J. Theo. App. Mech. 54(4), 369-377. http://dx.doi.org/10.15632/jtampl.54.4.1369
  29. Roy, K. Ting, T.C.H., Lau, H.H. and Lim, J.B.P. (2018), "Nonlinear behavior of axially loaded back-to-back built-up cold-formed steel un-lipped channel sections", Steel Comp. Struct. 28(2), 233-250. http://dx.doi.org/10.12989/scs.2018.28.2.233.
  30. Roy, K., Lau, H.H. and Lim, J.B.P. (2019), "Finite element modelling of back-to-back built-up cold-formed stainless-steel lipped channels under axial compression", Steel Comp. Struct., 33(1), 37-66. http://dx.doi.org/10.12989/scs.2019.33.1.037.
  31. Sadovsky, Z., Krivacek, J., Ivanco, V. and Duricovac, A. (2012), "Computational modelling of geometric imperfections and buckling strength of cold-formed steel", J. Constr. Steel Res. 78, 1-7. https://doi.org/10.1016/j.jcsr.2012.06.005
  32. Schafer, B.W. and Pekoz, T. (1998), "Computational modeling of cold-formed steel: characterizing geometric imperfections and residual stresses", J. Constr. Steel Res. 47, 193-210. https://doi.org/10.1016/S0143-974X(98)00007-8
  33. Selvaraj, S. and Madhavan, M. (2018), "Geometric imperfection measurements and validations on cold-formed steel channels using 3d noncontact laser scanner", J. Struct. Eng. 144(3), 04018010. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001993.
  34. Selvaraj, S. and Madhavan, M. (2021), "Design of cold-formed steel built-up columns subjected to local-global interactive buckling using direct strength method", Thin-Walled Struct. 159, 107305. https://doi.org/10.1016/j.tws.2020.107305.
  35. SP 6-1-2003 (2003), Handbook for Structural Engineers -Part- 1 Structural Steel Sections, Bureau of Indian Standards, New Delhi, India.
  36. SP 6-5-1980 (1980), Handbook for Structural Engineers -Part- 5 Cold-formed, Light-gauge Steel Structures, Bureau of Indian Standards, New Delhi, India.
  37. Valsa Ipe, T., Sharada Bai, H., Manjula Vani, K. and Iqbal, M.M.Z. (2013), "Flexural behavior of cold-formed steel concrete composite", Steel Compo. Struct. 14(2), 105-120. https://doi.org/10.12989/scs.2013.14.2.105.
  38. Wang, J., Li, H.N., Fu, X. and Li, Q. (2021), "Geometric imperfections and ultimate capacity analysis of a steel lattice transmission tower", J. Constr. Steel Res., 183, 106734. https://doi.org/10.1016/j.jcsr.2021.106734
  39. Wu, J., Ahu, J., Dong, Y. and Zhang, Q. (2020), "Nonlinear stability analysis of steel cooling towers considering imperfection sensitivity", Thin-Walled Struct. 146, 106448. https://doi.org/10.1016/j.tws.2019.106448.
  40. Ye, J., Hajirasouliha, I., Becque, J. and Pilakoutas, K. (2016), "Development of more efficient cold formed steel channel sections in bending", Thin-Walled Struct. 101, 1-13 https://doi.org/10.1016/j.tws.2015.12.021.
  41. Zeinoddini, V.M. and Schafer, B.W. (2012), "Simulation of geometric imperfections in cold-formed steel members using spectral representation approach", Thin-Walled Struct. 60, 105-117. https://doi.org/10.1016/j.tws.2012.07.001.