DOI QR코드

DOI QR Code

Development and Characterization of the Asphalt Binder with Low-heat and Crosslink Structured Additive

  • Eun Kyoung Lee (Department of Pharmaceutical Biomedical Engineering, Cheongju University) ;
  • You Kyoung Kim (Department of Biomedical Science, Cheongju University)
  • 투고 : 2022.12.27
  • 심사 : 2022.12.31
  • 발행 : 2022.12.31

초록

In this study, a low-heat additive with a crosslink structure was dispersed in asphalt to simultaneously lower the production temperature of, and to modify the asphalt binder. This low-heat additive was prepared by different feeding ratios of styrene-butadiene-styrene (SBS) and polyvinylchloride (PVC) as polymer modifiers, and ZnO as a crosslinking agent. In order to confirm the crosslinking density and compatibility of the crosslink structured low-heat additive with asphalt, surface free energy, swelling ratio, differential scanning calorimetry (DSC), and scanning electron microscope (SEM) parameters were carefully investigated to examine this relationship, and the role of the crosslink structured low-heat additive. In addition, by measuring the penetration and softening point of the asphalt binder, it was confirmed that it corresponds to PG 64-22. With increasing ZnO in the crosslink structured low-heat additive, the swelling ratio decreased, leading to an increase in crosslinking density. The crosslink structured low-heat additive and the asphalt binder were found to be compatible with each other by DSC and SEM analysis.

키워드

과제정보

본 연구는 국토교통부/국토교통과학기술진흥원의 지원으로 수행되었음(과제번호 21CTAP-C163646-01).

참고문헌

  1. S. J. Jeon and J. H. Jeong, "건설분야 탄소중립(Net-Zero) 정책 동향과 스마트건설기술의 역할", Construction Engineering and Management, 23, 49 (2022).
  2. S. I. Kang, K. H. Lee, Y. J. Lee, and J. J. Lee, "A study on Compaction Properties of Foamed Warm-Mix Asphalt", Korean Society of Civil Engineers, 11, 23 (2019).
  3. C. H. Graham and D. P. Brian, "Evaluation of Sasobit for use in warm mix asphalt", NCAT report, 5, 1 (2005).
  4. S. H. Mun, "Performance Evaluation of SASOBIT with Medium Temperature Asphalt Additives", Korean Society of Road Engineers, 11, 26 (2009).
  5. Y. J. Kim, J. J. Lee, C. M. Baek, S. L. Yang, S. A. Kwon, and Y. H. Suh, "Performance Evaluation of Warm-and Hot-Mix Asphalt Mixtures Based on Laboratory and Accelerated Pavement Tests", Advances in Materials Science and Engineering, 20, 1 (2012).
  6. B. Ali, "A review of the warm mix asphalt (WMA) technologies: Effects on thermo-mechanical and rheological properties", Journal of Cleaner Production, 259, 2 (2020).
  7. W. S. Heo, E. K. Lee, and S. Y. Choi, "A Study on the Stabilization of Asphalt Emulsion with Phase Inversion Emulsification Method", Elast. Compos., 44, 143 (2009).
  8. S. J. Lee and J. S. Lee, "Evaluation of the Mechanical Properties of High -Viscosity Polymer Modified Asphalt Binders via PG and MSCR tests", International Journal of Highway Engineering, 23, 47 (2021).
  9. K. C. Song, S. K. Kim, and J. M. Kim, "Miscibility Control of Polyurethane/Polystyrene IPN's (I): Effect of Internetwork Salt Formation on Phase Behavior", Polymer (Korea), 20, 96 (1996).
  10. J. S. Sin, J. H. Cho, and S. W. Cho, "Functional Hydrogel for the Application of Drug Delivery and Tissue Engineering", Prospectives of Industrial Chemistry, 18, 2 (2015).
  11. O. Olabisi, L. M. Robeson, and M. T. Shaw, "Polymer-Polymer Miscibility", Acadenuc Oress, New York, (1979).
  12. L. H. Sperling, "Interpenetrating Polymer Networks and Related Materials", Plenum Press, New York, (1981).
  13. K. Lee, S. Y. Choi, and S. J. Park, "Stabilization of Chlorosulfonated Polyethylene (CSM) Rubber Emulsion with Surfactant Mixture", J. Elastomer., 34, 4 (2001).
  14. A. W. Adamson, "Physical Chemistry of Surface", 5th ed., John Wiley, New York, (1990).
  15. J. N. Israelachvili, "Intermolecular and Surface Force", 2nd ed., Academic Press, San Diego, (1991).
  16. F. Hoecker and J. Karger-Kocsism, "Surface energetics of carbon fibers and its effects on the mechanical performance of CF/EP composites", J. Appl. Polym, 59, 139 (1996).
  17. K. Ma, T. S. Chung, and R. J. Good, "Surface energy of thermotropic liquid crystalline polyesters and polyesteramide", J Polym. Sci., Part B, 36, 2327 (1998).
  18. F. M. Fowkes, "Determination of interfacial tensions, contact angles, and dispersion forces in surfaces by assuming additivity of intermolecular interactions in surfaces", J. Phys. Chem., 66, 382 (1962).
  19. D. K. Owens and R. C. Wendt, "Estimation of the surface free energy of polymers", J. Appl. Polym. Sci., 13, 1741 (1969).
  20. S. Wu, "Polymer interface and Adhesion", 1st ed.Mercel Dekker, New York, (1982).
  21. M. R. Kalaee, M. H. N. Famili, and H. Mahdavi, "Cure kinetic of poly(alkyltetrasulfide) using a rheological method", Polymer-Plastics Technology and Engineering, 48, 627 (2009).
  22. S. M. Choi, E. K. Lee, and S. Y. Choi, "Effects of Silane-treated Silica on the Cure Temperature and Mechanical Properties of Elastomeric Epoxy", Elastomer, 43, 147 (2008).
  23. E. Y. Park, E. H. S, and S. W. Lim, "Effect of Synthetic Hydrotalcite on Salt Water Resistance of Chloroprene rubber Foam", Textile Coloration and Finishing, 31, 177 (2019).
  24. J. Ricka and T. Toyoichi, "Swelling of ionic gels: quantitative performance of the Donnan theory", Macromolecules, 17, 291 (1984).
  25. J. Ricka and T. Tanaka, "Phase transition in ionic gels induced by copper complexation", Macromolecules, 18, 83, (1985).
  26. J. Grignon and A. M. Scallan, "Effect of pH and neutral salts upon the swelling of cellulose gels", Journal of Applied Polymer Science, 25, 2829 (1980).
  27. E. K. Lee and S. Y. Choi, "Effect of Metal Ionic Crosslinking Agents on the Water Resistance and Mechancial Properties of EVA Emulsion", Journal of Adhesion and Interface, 9, 24 (2008).
  28. C. Chang, K. Han, and L. Zhang, "Structure and properties of cellulose/poly (N-isopropylacrylamide) hydrogels prepared by IPN strategy", Polymers for Advanced Technologies, 22, 1329 (2011).
  29. U. Farooq, J. Teuwen, and C. Dransfeld, "Toughening of epoxy systems with interpenetrating polymer network (IPN): A review", Polymers, 12, 1908 (2020).
  30. N. Park, W. H. Kim, Y. G. Gang, and M. H. Han, "Silica Filled Rubber Compound 에서의 가교 촉진제 특성", Rubber Technology, 17, 18 (2016).
  31. E. J. Lee, J. H. Lee, and K. H. Lim, "Hybrid Waterproofing Polymer-modified Asphalt Filled with Carbon Fiber and Inorganic Materials", Polymer(Korea), 44, 1 (2020).
  32. J. S. Shin, J. H. Cho, and S. W. Cho, "Functional Hydrogel for the Application of Drug Delivery and Tissue Engineering", KiC News, 18, 2 (2015).
  33. J. S. Kim, J. H. Lee, W. S. Jung, J. W. Bae, H. C. Park, and D. P. Kang, "Effects of Reinforcing Fillers on Far-infrared Vulcanization Characteristics of EPDM", Elast. Compos., 44, 47 (2009).
  34. H. K. Lee, D. Y. Kim, G. M. Nam, and K. H. Seo, "Application of Olefin Resin/Paraffin Oil Compounds for Self-lubricative Material", Polymer(Korea), 40, 516 (2016).
  35. Wunderlich Bernhard, "Thermal analysis of polymeric materials.", Springer Science & Business Media, 20, 777 (2005).
  36. P. Dahal and Y. C. Kim., "Effect of irradiation and LDPE content on crystal formation of PP", Journal of the Korea Academia-Industrial cooperation Society, 15, 4039 (2014).
  37. G. S. Cho, D. H. Lee, D. S. Kim, H. M. Lim, C. Y. Kim, and S. H. Lee, "Effect of Concentration and Surface Property of Silica Sol on the Determination of Particle Size and Electrophoretic Mobility by Light Scattering Method", Korean Chemical Engineering Research, 51, 622 (2013).
  38. J. S. Yang, K. Y. Lee, Y. S. Chio, and D. H. Park, "Modulus Properties and Smoothness Measurement of Semiconducting Materials Using the DMA and SEM", The Transactions of the Korean Institute of Electrical Engineers C, 54, 443 (2005).
  39. K. Y Lee, J. S. Yang, J. C. Nam, Y. S. Choi, and D. H. Park, "Formation and Dispersion Measurement in Semiconducting Materials Using the SEM and AFM. In: Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference", The Korean Institute of Electrical and Electronic Material Engineers, 20, 236 (2005).
  40. J. Y. Lee and J. Y. Han, "DSC and FTIR Studies of Miscible Poly(butylene 2,6-naphthalate)/Poly(4-vinylphenol) Blends", Polymer(Korea), 26, 737 (2002).
  41. J. H. Kim, H. J. Choi, D. C. Lee, J. S. Yoon, I. J. Chin, and K. H. Lee, "Miscibility and Thermal Behavior of Biodegradable Synthetic Aliphatic Polyester (Bionolle) and Poly(epichlorohydrin) Blends", Pollimo, 24, 358 (2000).
  42. S. S. Choe, "시차주사열량법 (DSC)을 이용한 고무 소재의 분석 기법", Rubber Technology, 22, 15 (2021).
  43. E. S. Chae and S. S. Choi, "Analytical techniques for mesurement of crosslink densities of rubber vulcanizates", Elast. Compos., 54, 209 (2019).
  44. Y. Liu, Y. C, G. Yin, and H. Ma, "Synthesis, Characterization, and Drug Release Behaviour of Novel Soy Protein/ Poly(acrylic acid) IPN Hydrogels", Iranian Polymer Journal, 18, 339 (2009).
  45. J. S. Kim, J. E. Song, M. J. Im, J. H. Park, H. C. Kim, and H. I. Kim, "Preparation of Acrylic Acid-modified Polyethylene Wax by Sequential Reaction of Pyrolysis and Grafting", Polymer(Korea), 42, 466 (2018).
  46. E. K. Lee, "Phase Inversion Emulsification and Enhancement of Physical Properties for Cationic Emulsified Asphalt", Elast. Compos., 4, 265 (2015).