Computers and Concrete

  • 제29권 5호
  • /
  • Pages.347-360
  • /
  • 2022
  • /
  • 1598-8198(pISSN)
  • /
  • 1598-818X(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Effect of fly ash and metakaolin on the properties of fiber-reinforced cementitious composites: A factorial design approach

  • Sonebi, Mohammed (School of Natural and Built Environment, Queen's University Belfast) ;
  • Abdalqader, Ahmed (Engineering Department, Tracey Concrete Ltd) ;
  • Fayyad, Tahreer (Engineering Department, Tracey Concrete Ltd) ;
  • Amaziane, Sofiane (Civil Engineering Department, University of Clermont Auvergne, Institut Pascal, Campus Universitaire des Cezeaux) ;
  • El-Khatib, Jamal (Civil Engineering Department, Beirut Arab University)
  • 투고 : 2021.12.10
  • 심사 : 2022.05.02
  • 발행 : 2022.05.25
⟨ 이전 논문 다음 논문 ⟩

초록

Fiber-reinforced cementitious composites (FRCC) have emerged as a response to the calls for strong, ductile and sustainable concrete mixes. FRCC has shown outstanding mechanical properties and ductility where special fibres are used in the mixes to give it the strength and the ability to exhibit strain hardening. With the possibility of designing the FRCC mixes to include sustainable constituents and by-products materials such as fly ash, FRCC started to emerge as a green alternative as well. To be able to design mixes that achieve these conflicting properties in concrete, there is a need to understand the composition effect on FRCC and optimize these compositions. Therefore, this paper aims to investigate the influence of FRCC compositions on the properties of fresh and hardened of FRCC and then to optimize these mix compositions using factorial design approach. Three factors, water-to-binder ratio (w/b), mineral admixtures (total of fly ash and metakaolin by cement content (MAR)), and metakaolin content (MK), were investigated to determine their effects on the properties of fresh and hardened FRCC. The results show the importance of combining both FA and MK in obtaining a satisfactory fresh and mechanical properties of FRCC. Models were suggested to elucidate the role of the studied factors and a method for optimization was proposed.

키워드

과제정보

The authors would like to express their gratitude to J. Maxwell who provided considerable help in the execution of the experimental program.

참고문헌

  1. Ali, M. and Nehdi, M.L. (2020), "Behaviour of hybrid fibre-reinforced engineered cementitious composites with strain recovery", Proc. Inst. Civil Eng. Constr. Mater., 1-12. https://doi.org/10.1680/jcoma.18.00048.
  2. Alonge, O.R., Ramli, M.B. and Lawalson, T.J. (2017), "Properties of hybrid cementitious composite with metakaolin, nanosilica and epoxy", Constr. Build. Mater., 155, 740-750. https://doi.org/10.1016/j.conbuildmat.2017.08.105.
  3. Aydin, S., Hilmi Aytac, A. and Ramyar, K. (2009), "Effects of fineness of cement on polynaphthalene sulfonate based superplasticizer-cement interaction", Constr. Build. Mater., 23, 2402-2408. https://doi.org/10.1016/j.conbuildmat.2008.10.004.
  4. Bai, J. and Gailius, A. (2009), "Consistency of fly ash and metakaolin concrete", J. Civil Eng. Manag., 15, 131-135. https://doi.org/10.3846/1392-3730.2009.15.131-135.
  5. Bai, J., Wild, S., Ware, J.A. and Sabir, B.B. (2003), "Using neural networks to predict workability of concrete incorporating metakaolin and fly ash", Adv. Eng. Softw., 34, 663-669. https://doi.org/10.1016/S0965-9978(03)00102-9.
  6. Behbahani, H. Flexural behaviour of steel fibre reinforced concrete beams, MS.c. Dissertation of Philosophy, Faculty of Civil Engineering, Universiti Technologi Malaysia.
  7. Bernardo, L.F.A. and Lopes, S.M.R. (2004), "Neutral axis depth versus flexural ductility in high-strength concrete beams", J. Struct. Eng., 130, 452-459. https://doi.org/10.1061/(ASCE)0733-9445(2004)130:3(452).
  8. Cabeza, L.F., Barreneche, C., Miro, L., Martinez, M., Fernandez, A.I. and Urge-Vorsatz, D. (2013), "Affordable construction towards sustainable buildings: review on embodied energy in building material", Current Opinion in Envir. Sustain., 5(2), 229-236. https://doi.org/10.1016/J.COSUST.2013.05.005.
  9. Carpinteri, A., Cadamuro, E. and Corrado, M. (2014), "Minimum flexural reinforcement in rectangular and T-section concrete beams", Struct. Concrete, 15, 361-372. https://doi.org/10.1002/suco.201300056.
  10. Chindaprasirt, P., Jaturapitakkul, C. and Sinsiri, T. (2005), "Effect of fly ash fineness on compressive strength and pore size of blended cement paste", Cement Concrete Compos., 27, 425-428. https://doi.org/10.1016/j.cemconcomp.2004.07.003.
  11. Chung, D.D. (2005), "Dispersion of short fibers in cement", J. Mater. Civil Eng., 17, 379-383. https://doi.org/10.1061/(asce)0899-1561(2005)17:4(379).
  12. Chung, K.L., Ghannam, M. and Zhang, C. (2018), "Effect of specimen shapes on compressive strength of engineered cementitious composites (ECCs) with different values of water-to-binder ratio and PVA fiber", Arab. J. Sci. Eng., 43, 1825-1837. https://doi.org/10.1007/s13369-017-2776-8.
  13. Collins, M.P. and Kuchma, D. (1999), "How safe are our large, ligthly reinforced concrete beams, slabs and footings?", ACI Struct. J., 96, 482-490.
  14. Dinakar, P., Sahoo, P.K. and Sriram, G. (2013), "Effect of metakaolin content on the properties of high strength concrete", Int. J. Concrete Struct. Mater., 7, 215-223. https://doi.org/10.1007/s40069-013-0045-0.
  15. Fayyad, T.M. and Lees, J.M. (2015), "Evaluation of a minimum flexural reinforcement ratio using fracture based modelling", IABSE Conference, Geneva 2015, Structural Engineering: Providing Solutions to Global Challenges-Report, 735-742. https://doi.org/10.2749/222137815818357854.
  16. Harrington, E.C. (1965), "The desirability function", Ind. Qual. Control, 21, 494-498.
  17. Ismail, M.K., Hassan, A.A.A. and Lachemi, M. (2019), "Performance of self-consolidating engineered cementitious composite under drop-weight impact loading", J. Mater. Civil Eng., 31, 04018400. https://doi.org/10.1061/(asce)mt.1943-5533.0002619.
  18. Janotka, I., Puertas, F., Palacios, M., Kuliffayova, M. and Varga, C. (2010), "Metakaolin sand-blended-cement pastes: Rheology, hydration process and mechanical properties", Constr. Build. Mater., 24, 791-802. https://doi.org/10.1016/j.conbuildmat.2009.10.028.
  19. Justice, J.M., Kennison, L., Mohr, B.J., Beckwith, S.L., McCormick, L.E., Wiggins, B., Zhang, Z.Z. and Kurtis, K.E. (2005), "Comparison of two metakaolins and a silica fume used as supplementary comparison of two metakaolins and a silica fume used as supplementary cementitious materials", Seventh International Symposium on Utilization of High-Strength/High Performance Concrete.
  20. Kani, G.N.J. (1967), "How safe are our large reinforced concrete beams?", ACI J., 64, 128-141.
  21. Kayali, O. (2004), "Effect of high volume fly ash on mechanical properties of fiber reinforced concrete", Mater. Struct. Constr., 37, 318-327. https://doi.org/10.1617/13978.
  22. Khatib, J., Negim, E.S., Yeligbayeva, G. and Mun, G. (2014), "Strength characteristics of mortar containing high volume metakaolin as cement replacement", Res. Rev. Mater. Sci. Chem., 3, 85-95.
  23. Kim, J.S. and Lee, H.K. (2021), "Thermomechanical behavior of alkali-activated slag/fly ash composites with PVA fibers exposed to elevated temperatures", Adv. Concrete Constr., 11, 11-18. https://doi.org/10.12989/acc.2021.11.1.011.
  24. Kong, H.J., Bike, S.G. and Li, V.C. (2003), "Constitutive rheological control to develop a self-consolidating engineered cementitious composite reinforced with hydrophilic poly (vinyl alcohol) fibers", Cement Concrete Compos., 25, 333-341. https://doi.org/10.1016/S0958-9465(02)00056-2.
  25. Kuder, K.G., Ozyurt, N., Mu, E.B. and Shah, S.P. (2007), "Rheology of fiber-reinforced cementitious materials", Cement Concrete Res., 37, 191-199. https://doi.org/10.1016/j.cemconres.2006.10.015.
  26. Li, V. and Kanda, T. (1998), "Engineered Cementitious Composites for Structural Applications", J. Mater. Civil Eng., 10, 66-69. https://doi.org/10.1061/(asce)0899-1561(1997)9:1(1).
  27. Li, V.C. (2008), "Engineered Cementitious Composites (ECC) material", Structural, and Durability Performance.
  28. Li, V.C., Wang, S. and Wu, C. (2001), "Tensile strain-hardening behavior or polyvinyl alcohol engineered cementitious composite (PVA-ECC)", ACI Mater. J., 98, 483-492. https://doi.org/10.14359/10851.
  29. Liu, H., Zhang, Q., Li, V., Su, H. and Gu, C. (2017), "Durability study on engineered cementitious composites (ECC) under sulfate and chloride environment", Constr. Build. Mater., 133, 171-181. https://doi.org/10.1016/j.conbuildmat.2016.12.074.
  30. Madlool, N.A., Saidur, R., Hossain, M.S. and Rahim, N.A. (2011), "A critical review on energy use and savings in the cement industries", Renew. Sustain. Energy Rev., 15, 2042-2060. https://doi.org/10.1016/j.rser.2011.01.005.
  31. Moinul Islam, M. and Saiful Islam, M. (2010), "Strength behavior of mortar using slag as partial replacement of cement", Concrete Res. Lett., 2, 98-106. https://doi.org/10.3329/mist.v3i0.8053.
  32. Murray, S.J., Subramani, V.J., Selvam, R.P. and Hall, K.D. (2010), "Molecular dynamics to understand the mechanical behavior of cement paste", Transp. Res. Rec. J. Transp. Res. Board, 75-82. https://doi.org/10.3141/2142-11.
  33. Noushini, A., Samali, B. and Vessalas, K. (2013), "Effect of polyvinyl alcohol (PVA) fibre on dynamic and material properties of fibre reinforced concrete", Constr. Build. Mater., 49, 374-383. https://doi.org/10.1016/j.conbuildmat.2013.08.035.
  34. Noushini, A., Vessalas, K. and Samali, B. (2014), "Static mechanical properties of polyvinyl alcohol fibre reinforced concrete (PVA-FRC)", Mag. Concrete Res., 66, 465-483. https://doi.org/10.1680/macr.13.00320.
  35. Oudah, F. and El-Hacha, R. (2014), "Ductility of FRP reinforced RC structures: A critical review of definition and expressions", Concrete Solutions 2014: 5th International Conference in Concrete Repair, Belfast.
  36. Ozbay, E., Karahan, O., Lachemi, M., Hossain, K. M. A. and Duran Atis, C. (2012), "Investigation of properties of engineered cementitious composites incorporating high volumes of fly ash and metakaolin", ACI Mater. J., 109, 556-572.
  37. Pan, J.L., Yuan, F., Luo, M. and Leung, K.Y. (2012), "Effect of composition on flexural behavior of engineered cementitious composites", Sci. China Technol. Sci., 55, 3425-3433. https://doi.org/10.1007/s11431-012-4990-7.
  38. Prakash, R., Raman, S. N., Divyah, N., Subramanian, C., Vijayaprabha, C. and Praveenkumar, S. (2021), "Fresh and mechanical characteristics of roselle fibre reinforced self-compacting concrete incorporating fly ash and metakaolin", Constr. Build. Mater., 290, 123209. https://doi.org/10.1016/j.conbuildmat.2021.123209.
  39. Rashiddadash, P., Ramezanianpour, A.A. and Mahdikhani, M. (2014), "Experimental investigation on flexural toughness of hybrid fiber reinforced concrete (HFRC) containing metakaolin and pumice", Constr. Build. Mater., 51, 313-320. https://doi.org/10.1016/j.conbuildmat.2013.10.087.
  40. Sahmaran, M. and Li, V.C. (2009), "Durability properties of micro-cracked ECC containing high volumes fly ash", Cement Concrete Res., 39, 1033-1043. https://doi.org/10.1016/j.cemconres.2009.07.009.
  41. Sahmaran, M., Ozbay, E., Yucel, H.E., Lachemi, M. and Li, V.C. (2011), "Effect of fly ash and PVA fiber on microstructural damage and residual properties of engineered cementitious composites exposed to high temperatures", J. Mater. Civil Eng., 23, 1735-1745. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000335.
  42. Sasmal, S. and Avinash, G. (2016), "Investigations on mechanical performance of cementitious composites micro-engineered with poly vinyl alcohol fibers", Constr. Build. Mater., 128, 136-147. https://doi.org/10.1016/j.conbuildmat.2016.10.025.
  43. Schneider, M., Romer, M., Tschudin, M. and Bolio, H. (2011), "Sustainable cement production-present and future", Cement Concrete Res., 41, 642-650. https://doi.org/10.1016/j.cemconres.2011.03.019.
  44. Schulze, J. (1999), "Influence of water-cement ratio and cement content on the properties of polymer-modified mortars", Cement Concrete Res., 29, 909-915. https://doi.org/10.1016/S0008-8846(99)00060-5.
  45. Sharma, R. and Bansal, P.P. (2019), "Efficacy of supplementary cementitious material and hybrid fiber to develop the ultra high performance hybrid fiber reinforced concrete", Adv. Concrete Constr., 8, 21-31. https://doi.org/10.12989/acc.2019.8.1.021.
  46. Shehab El-Din, H.K., Eisa, A.S., Abdel Aziz, B.H. and Ibrahim, A. (2017), "Mechanical performance of high strength concrete made from high volume of Metakaolin and hybrid fibers", Constr. Build. Mater., 140, 203-209. https://doi.org/10.1016/j.conbuildmat.2017.02.118.
  47. Singh, M., Saini, B. and Chalak, H.D. (2019), "Performance and composition analysis of engineered cementitious composite (ECC)-A review", J. Build. Eng., 26, 100851. https://doi.org/10.1016/j.jobe.2019.100851.
  48. Strength of cementitious mortars: A literature review with special reference to weak mortars in tension, https://warwick.ac.uk/fac/sci/eng/research/grouplist/structural/dtu/pubs/rn/build/still_2004/still_11-2-04.pdf.
  49. Tahmouresi, B., Koushkbaghi, M., Monazami, M., Abbasi, M.T. and Nemati, P. (2019), "Experimental and statistical analysis of hybrid-fiber-reinforced recycled aggregate concrete", Comput. Concrete, 24, 193-206. https://doi.org/10.12989/cac.2019.24.3.193.
  50. Turk, K. and Nehdi, M. L. (2020), "Flexural toughness of sustainable ECC with high-volume substitution of cement and silica sand", Constr. Build. Mater., 270, 121438. https://doi.org/10.1016/j.conbuildmat.2020.121438.
  51. Wang, S. (2005), Micromechanics Based Matrix Design for Engineered Cementitious Composites, University of Michigan.
  52. Wang, S. and Li, V.C. (2007), "Engineered cementitious composites with high-volume fly ash", ACI Mater. J., 104, 233-241. https://doi.org/10.14359/18668.
  53. Yang, E.H., Sahmaran, M., Yang, Y. and Li, V.C. (2009), "Rheological control in production of engineered cementitious composites", ACI Mater. J., 106, 357-366. https://doi.org/10.14359/56656.
  54. Yang, E.H., Yang, Y. and Li, V.C. (2007), "Use of high volumes of fly ash to improve ECC mechanical properties and material greenness", ACI Mater. J., 104, 620-628. https://doi.org/10.14359/18966.
  55. Yang, Y., Gao, X., Deng, H., Yu, P. and Yao, Y. (2010), "Effects of water/binder ratio on the properties of engineered cementitious composites", J. Wuhan Univ. Technol. Mater. Sci. Ed., 25, 298-302. https://doi.org/10.1007/s11595-010-2298-7.
  56. Zhang, Z., Qian, S. and Ma, H. (2014), "Investigating mechanical properties and self-healing behavior of micro-cracked ECC with different volume of fly ash", Constr. Build. Mater., 52, 17-23. https://doi.org/10.1016/j.conbuildmat.2013.11.001.
  57. Zhou, M., Shao, Z. and Hassanein, M.F. (2021), "Bending behaviour of reinforced concrete/engineered cementitious composite beams", Mag. Concrete Res., 1-9. https://doi.org/10.1680/jmacr.19.00380.