DOI QR코드

DOI QR Code

Nonlinear analysis of two-directional functionally graded doubly curved panels with porosities

  • Kumar, H.S. Naveen (Department of Mechanical Engineering, National Institute of Technology Karnataka) ;
  • Kattimani, Subhaschandra (Department of Mechanical Engineering, National Institute of Technology Karnataka)
  • 투고 : 2021.08.03
  • 심사 : 2022.02.11
  • 발행 : 2022.05.25

초록

This article investigates the nonlinear behavior of two-directional functionally graded materials (TDFGM) doubly curved panels with porosities for the first time. An improved and effectual approach is established based on the improved first-order shear deformation shell theory (IFSDST) and von Karman's type nonlinearity. The IFSDST considers the effects of shear deformation without the need for a shear correction factor. The composition of TDFGM constitutes four different materials, and the modified power-law function is employed to vary the material properties continuously in both thickness and longitudinal directions. A nonlinear finite element method in conjunction with Hamilton's principle is used to obtain the governing equations. Then, the direct iterative method is incorporated to accomplish the numerical results using the frequency-amplitude, nonlinear central deflection relations. Finally, the influence of volume fraction grading indices, porosity distributions, porosity volume, curvature ratio, thickness ratio, and aspect ratio provides a thorough insight into the linear and nonlinear responses of the porous curved panels. Meanwhile, this study emphasizes the influence of the volume fraction gradation profiles in conjunction with the various material and geometrical parameters on the linear frequency, nonlinear frequency, and deflection of the TDFGM porous shells. The numerical analysis reveals that the frequencies and nonlinear deformations can be significantly regulated by changing the volume fraction gradation profiles in a specified direction with an appropriate combination of materials. Hence, TDFGM panels can overcome the drawbacks of the functionally graded materials with a gradation of properties in a single direction.

키워드

참고문헌

  1. Allahkarami, F., Ghassabzadeh Saryazdi, M. and Tohidi, H. (2020), "Dynamic buckling analysis of bi-directional functionally graded porous truncated conical shell with different boundary conditions", Compos. Struct., 252, 112680. https://doi.org/10.1016/j.compstruct.2020.112680.
  2. Allahkarami, F., Tohidi, H., Dimitri, R. and Tornabene, F. (2020), "Dynamic stability of bi-directional functionally graded porous cylindrical shells embedded in an elastic foundation", Appl. Sci., 10(4), 1345. https://doi.org/10.3390/app10041345.
  3. Aminipour, H., Janghorban, M. and Civalek, O. (2020), "Analysis of functionally graded doubly-curved shells with different materials via higher order shear deformation theory", Compos. Struct., 251, 112645. https://doi.org/10.1016/j.compstruct.2020.112645.
  4. Amir, M. and Talha, M. (2019), "Nonlinear vibration characteristics of shear deformable functionally graded curved panels with porosity including temperature effects", Int. J. Press. Ves. Pip., 172, 28-41. https://doi.org/10.1016/j.ijpvp.2019.03.008.
  5. Asemi, K., Salehi, M. and Akhlaghi, M. (2011), "Elastic solution of a two-dimensional functionally graded thick truncated cone with finite length under hydrostatic combined loads", Acta Mechanica, 217(1-2), 119-134. https://doi.org/10.1007/s00707-010-0380-z.
  6. Asgari, M. and Akhlaghi, M. (2011), "Natural frequency analysis of 2D-FGM thick hollow cylinder based on three-dimensional elasticity equations", Eur. J. Mech.-A/Solid., 30(2), 72-81. https://doi.org/10.1016/j.euromechsol.2010.10.002.
  7. Asgari, M., Akhlaghi, M. and Hosseini, S.M. (2009), "Dynamic analysis of two-dimensional functionally graded thick hollow cylinder with finite length under impact loading", Acta Mechanica, 208(3-4), 163-180. https://doi.org/10.1007/s00707-008-0133-4.
  8. Chan, D.Q., Van Hoan, P., Trung, N.T., Hoa, L.K. and Huan, D.T. (2021), "Nonlinear buckling and post-buckling of imperfect FG porous sandwich cylindrical panels subjected to axial loading under various boundary conditions", Acta Mechanica, 232(3), 1163-1179. https://doi.org/10.1007/s00707-020-02882-6.
  9. Chen, M., Ye, T., Zhang, J., Jin, G., Zhang, Y., Xue, Y., Ma, X. and Liu, Z. (2020), "Isogeometric three-dimensional vibration of variable thickness parallelogram plates with in-plane functionally graded porous materials", Int. J. Mech. Sci., 169, 105304. https://doi.org/10.1016/j.ijmecsci.2019.105304.
  10. Chu, F., Wang, L., Zhong, Z. and He, J. (2014), "Hermite radial basis collocation method for vibration of functionally graded plates with in-plane material inhomogeneity", Comput. Struct., 142, 79-89. https://doi.org/10.1016/j.compstruc.2014.07.005.
  11. Ebrahimi, F. and Dabbagh, A. (2018), "NSGT-based acoustical wave dispersion characteristics of thermo-magnetically actuated double-nanobeam systems", Struct. Eng. Mech., 68(6), 701-711. https://doi.org/10.12989/sem.2018.68.6.701.
  12. Ebrahimi, F. and Dabbagh, A. (2019a), "A novel porosity-based homogenization scheme for propagation of waves in axially-excited FG nanobeams", Adv. Nano Res., 7(6), 379-390. https://doi.org/10.12989/anr.2019.7.6.379.
  13. Ebrahimi, F. and Dabbagh, A. (2019b), "Wave dispersion characteristics of heterogeneous nanoscale beams via a novel porosity-based homogenization scheme", Eur. Phys. J. Plus, 134(4), 1-8. https://doi.org/10.1140/epjp/i2019-12510-9.
  14. Ebrahimi, F. and Dabbagh, A. (2019c), Wave Propagation Analysis of Smart Nanostructures, 1st Edition, CRC Press.
  15. Ebrahimi, F. and Dabbagh, A. (2020), Mechanics of Nanocomposites, 1st Edition, CRC Press.
  16. Ebrahimi, F. and Dabbagh, A. (2021), "Magnetic field effects on thermally affected propagation of acoustical waves in rotary double-nanobeam systems", Wave. Random Complex Media, 31(1), 25-45. https://doi.org/10.1080/17455030.2018.1558308.
  17. Ebrahimi, F., Dabbagh, A., Rabczuk, T. and Tornabene, F. (2019a), "Analysis of propagation characteristics of elastic waves in heterogeneous nanobeams employing a new two-step porosity-dependent homogenization scheme", Adv. Nano Res., 7(2), 135-143. https://doi.org/10.12989/anr.2019.7.2.135.
  18. Ebrahimi, F., Nouraei, M., Dabbagh, A. and Civalek, O . (2019b), "Buckling analysis of graphene oxide powder-reinforced nanocomposite beams subjected to non-uniform magnetic field", Struct. Eng. Mech., 71(4), 351-361. https://doi.org/10.12989/sem.2019.71.4.351.
  19. Ebrahimi, F., Nouraei, M., Dabbagh, A. and Rabczuk, T. (2019c), "Thermal buckling analysis of embedded graphene-oxide powder-reinforced nanocomposite plates", Adv. Nano Res., 7(5), 293-310. https://doi.org/10.12989/anr.2019.7.5.293.
  20. Ebrahimi, F., Seyfi, A. and Dabbagh, A. (2019a), "A novel porosity-dependent homogenization procedure for wave dispersion in nonlocal strain gradient inhomogeneous nanobeams", Eur. Phys. J. Plus, 134(5), 1-11. https://doi.org/10.1140/epjp/i2019-12547-8
  21. Ebrahimi, F., Seyfi, A. and Dabbagh, A. (2019b), "Dispersion of waves in FG porous nanoscale plates based on NSGT in thermal environment", Adv. Nano Res., 7(5), 325-335. https://doi.org/10.12989/anr.2019.7.5.325.
  22. Ebrahimi, M.J. and Najafizadeh, M.M. (2014), "Free vibration analysis of two-dimensional functionally graded cylindrical shells", Appl. Math. Model., 38(1), 308-324. https://doi.org/10.1016/j.apm.2013.06.015.
  23. Gao, K., Gao, W., Wu, B., Wu, D. and Song, C. (2018), "Nonlinear primary resonance of functionally graded porous cylindrical shells using the method of multiple scales", Thin Wall. Struct., 125, 281-293. https://doi.org/10.1016/j.tws.2017.12.039.
  24. Jha, D.K., Kant, T. and Singh, R.K. (2013), "A critical review of recent research on functionally graded plates", Compos. Struct., 96, 833-849. https://doi.org/10.1016/j.compstruct.2012.09.001.
  25. Kar, V.R. and Panda, S.K. (2016), "Nonlinear free vibration of functionally graded doubly curved shear deformable panels using finite element method", JVC/J. Vib. Control, 22(7), 1935-1949. https://doi.org/10.1177/1077546314545102.
  26. Keleshteri, M.M. and Jelovica, J. (2020), "Nonlinear vibration behavior of functionally graded porous cylindrical panels", Compos. Struct., 239, 112028. https://doi.org/10.1016/j.compstruct.2020.112028.
  27. Kumar, H.S, Kattimani, S. and Nguyen-Thoi, T. (2021), "Influence of porosity distribution on nonlinear free vibration and transient responses of porous functionally graded skew plates", Defence Technol., 17(6), 1918-1935. https://doi.org/10.1016/j.dt.2021.02.003.
  28. Li, H., Pang, F., Chen, H. and Du, Y. (2019), "Vibration analysis of functionally graded porous cylindrical shell with arbitrary boundary restraints by using a semi analytical method", Compos. Part B: Eng., 164, 249-264. https://doi.org/10.1016/j.compositesb.2018.11.046.
  29. Li, H., Pang, F., Ren, Y., Miao, X. and Ye, K. (2019), "Free vibration characteristics of functionally graded porous spherical shell with general boundary conditions by using first-order shear deformation theory", Thin Wall. Struct., 144, 106331. https://doi.org/10.1016/j.tws.2019.106331.
  30. Naveen Kumar, H.S. and Kattimani, S. (2021), "Effect of different geometrical non-uniformities on nonlinear vibration of porous functionally graded skew plates: A finite element study", Defence Technol., https://doi.org/10.1016/j.dt.2021.05.002.
  31. Nemat-Alla, M. (2003), "Reduction of thermal stresses by developing two-dimensional functionally graded materials", Int. J. Solid. Struct., 40(26), 7339-7356. https://doi.org/10.1016/j.ijsolstr.2003.08.017.
  32. Nemat-Alla, M. (2009), "Reduction of thermal stresses by composition optimization of two-dimensional functionally graded materials", Acta Mechanica, 208(3-4), 147-161. https://doi.org/10.1007/s00707-008-0136-1.
  33. Nemat-Alla, M., Ahmed, K.I.E. and Hassab-Allah, I. (2009), "Elastic-plastic analysis of two-dimensional functionally graded materials under thermal loading", Int. J. Solid. Struct., 46(14-15), 2774-2786. https://doi.org/10.1016/j.ijsolstr.2009.03.008.
  34. Pilafkan, R., Folkow, P.D., Darvizeh, M. and Darvizeh, A. (2013), "Three dimensional frequency analysis of bidirectional functionally graded thick cylindrical shells using a radial point interpolation method (RPIM)", Eur. J. Mech.-A/Solid., 39, 26-34. https://doi.org/10.1016/j.euromechsol.2012.09.014.
  35. Praveen, G.N. and Reddy, J.N. (1998), "Nonlinear transient thermoelastic analysis of functionally graded ceramic-metal plates", Int. J. Solid. Struct., 35(33), 4457-4476. https://doi.org/10.1016/S0020-7683(97)00253-9.
  36. Rad, A.B. and Shariyat, M. (2013), "A three-dimensional elasticity solution for two-directional FGM annular plates with non-uniform elastic foundations subjected to normal and shear tractions", Acta Mechanica Solida Sinica, 26(6), 671-690. https://doi.org/10.1016/S0894-9166(14)60010-0.
  37. Rezaiee-Pajand, M. and Masoodi, A.R. (2020), "Hygro-thermo-elastic nonlinear analysis of functionally graded porous composite thin and moderately thick shallow panels", Mech. Adv. Mater. Struct., 0(0), 1-19. https://doi.org/10.1080/15376494.2020.1780524.
  38. Saleh, B., Jiang, J., Fathi, R., Al-hababi, T., Xu, Q., Wang, L., Song, D. and Ma, A. (2020), "30 Years of functionally graded materials: An overview of manufacturing methods, applications and future challenges", Compos. Part B: Eng., 201, 108376. https://doi.org/10.1016/j.compositesb.2020.108376.
  39. Satouri, S., Kargarnovin, M.H., Allahkarami, F. and Asanjarani, A. (2015), "Application of third order shear deformation theory in buckling analysis of 2D-functionally graded cylindrical shell reinforced by axial stiffeners", Compos. Part B: Eng., 79, 236-253. https://doi.org/10.1016/j.compositesb.2015.04.036.
  40. Shariyat, M. and Alipour, M.M. (2011), "Differential transform vibration and modal stress analyses of circular plates made of two-directional functionally graded materials resting on elastic foundations", Arch. Appl. Mech., 81(9), 1289-1306. https://doi.org/10.1007/s00419-010-0484-x.
  41. Sobhani Aragh, B. and Hedayati, H. (2012), "Static response and free vibration of two-dimensional functionally graded metal/ceramic open cylindrical shells under various boundary conditions", Acta Mechanica, 223(2), 309-330. https://doi.org/10.1007/s00707-011-0563-2.
  42. Tanov, R. and Tabiei, A. (2000), "A simple correction to the first-order shear deformation shell finite element formulations", Finite Elem. Anal. Des., 35(2), 189-197. https://doi.org/10.1016/S0168-874X(99)00069-4.
  43. Thai, H.T. and Kim, S.E. (2015), "A review of theories for the modeling and analysis of functionally graded plates and shells", Compos. Struct., 128, 70-86. https://doi.org/10.1016/j.compstruct.2015.03.010.
  44. Thang, P.T., Duc, N.D. and Nguyen-Thoi, T. (2017), "Thermomechanical buckling and post-buckling of cylindrical shell with functionally graded coatings and reinforced by stringers", Aerosp. Sci. Technol., 66, 392-401. https://doi.org/10.1016/j.ast.2017.03.023.
  45. Thang, P.T., Nguyen-Thoi, T. and Lee, J. (2021), "Modeling and analysis of bi-directional functionally graded nanobeams based on nonlocal strain gradient theory", Appl. Math. Comput., 407, 126303. https://doi.org/10.1016/j.amc.2021.126303.
  46. Van Do, T., Nguyen, D.K., Duc, N.D., Doan, D.H. and Bui, T.Q. (2017a), "Analysis of bi-directional functionally graded plates by FEM and a new third-order shear deformation plate theory", Thin Wall. Struct., 119, 687-699. https://doi.org/10.1016/j.tws.2017.07.022.
  47. Wang, Y. and Wu, D. (2017), "Free vibration of functionally graded porous cylindrical shell using a sinusoidal shear deformation theory", Aerosp. Sci. Technol., 66, 83-91. https://doi.org/10.1016/j.ast.2017.03.003.
  48. Wattanasakulpong, N., Gangadhara Prusty, B., Kelly, D.W. and Hoffman, M. (2012), "Free vibration analysis of layered functionally graded beams with experimental validation", Mater. Des., 36, 182-190. https://doi.org/10.1016/j.matdes.2011.10.049.
  49. Zare Jouneghani, F., Dimitri, R., Bacciocchi, M. and Tornabene, F. (2017), "Free vibration analysis of functionally graded porous doubly-curved shells based on the first-order shear deformation theory", Appl. Sci., 7(12), 1252. https://doi.org/10.3390/app7121252.
  50. Zhao, J., Xie, F., Wang, A., Shuai, C., Tang, J. and Wang, Q. (2019), "Vibration behavior of the functionally graded porous (FGP) doubly-curved panels and shells of revolution by using a semi-analytical method", Compos. Part B: Eng., 157, 219-238. https://doi.org/10.1016/j.compositesb.2018.08.087.
  51. Zhao, X., Lee, Y.Y. and Liew, K.M. (2009), "Free vibration analysis of functionally graded plates using the element-free kp-Ritz method", J. Sound Vib., 319(3-5), 918-939. https://doi.org/10.1016/j.jsv.2008.06.025.
  52. Zhu, J., Lai, Z., Yin, Z., Jeon, J. and Lee, S. (2001), "Fabrication of ZrO2-NiCr functionally graded material by powder metallurgy", Mater. Chem. Phys., 68(1-3), 130-135. https://doi.org/10.1016/S0254-0584(00)00355-2.