DOI QR코드

DOI QR Code

Vision-based Input-Output System identification for pedestrian suspension bridges

  • Lim, Jeonghyeok (Department of Civil Engineering, Chungbuk National University) ;
  • Yoon, Hyungchul (Department of Civil Engineering, Chungbuk National University)
  • 투고 : 2021.06.15
  • 심사 : 2022.02.25
  • 발행 : 2022.05.25

초록

Recently, numbers of long span pedestrian suspension bridges have been constructed worldwide. While recent tragedies regarding pedestrian suspension bridges have shown how these bridges can wreak havoc on the society, there are no specific guidelines for construction standards nor safety inspections yet. Therefore, a structural health monitoring system that could help ensure the safety of pedestrian suspension bridges are needed. System identification is one of the popular applications for structural health monitoring method, which estimates the dynamic system. Most of the system identification methods for bridges are currently adapting output-only system identification method, which assumes the dynamic load to be a white noise due to the difficulty of measuring the dynamic load. In the case of pedestrian suspension bridges, the pedestrian load is within specific frequency range, resulting in large errors when using the output-only system identification method. Therefore, this study aims to develop a system identification method for pedestrian suspension bridges considering both input and output of the dynamic system. This study estimates the location and the magnitude of the pedestrian load, as well as the dynamic response of the pedestrian bridges by utilizing artificial intelligence and computer vision techniques. A simulation-based validation test was conducted to verify the performance of the proposed system. The proposed method is expected to improve the accuracy and the efficiency of the current inspection and monitoring systems for pedestrian suspension bridges.

키워드

과제정보

This research was supported by National Research Foundation of Korea (NRF) funded by the Ministry of Education(2019R1I1A3A01044827)

참고문헌

  1. Altunisik, A.C., Bayraktar, A. and Sevim, B. (2011), "Output-only system identification of posttensioned segmental concrete highway bridges", J. Bridge Eng., 16(2), 259-266. https://doi.org/10.1061/(asce)be.1943-5592.0000150.
  2. Chen, L., Papandreou, G., Kokkinos, I., Murphy, K. and Yuille, A. L. (2017), "Deeplab: Semantic image segmentation with deep convolutional nets, atrous convolution, and fully connected crfs", IEEE Trans. Pattern Anal. Mach. Intel., 40(4), 834-848. https://doi.org/10.1109/tpami.2017.2699184.
  3. Cho, S., Yun, C., Lynch, J.P., Zimmerman, A.T., Spencer Jr., B.F. and Nagayama, T. (2008), "Smart wireless sensor technology for structural health monitoring of civil structures", Steel Struct., 8(4), 267-275.
  4. Cooke, H. (2015), "Lake waikaremoana bridge breaks, sending trampers plummeting", https://www.stuff.co.nz/national/71747665/lake-waikaremoana-bridge-breaks-sending-trampers-plummeting.
  5. Dalal, N. and Triggs, B. (2005), "Histograms of oriented gradients for human detection", IEEE Computer Society Conference on Computer Vision and Pattern Recognition (CVPR'05), June.
  6. Eftekhar Azam, S., Rageh, A. and Linzell, D. (2019), "Damage detection in structural systems utilizing artificial neural networks and proper orthogonal decomposition", Struct. Control Hlth. Monit., 26(2), e2288. https://doi.org/10.1002/stc.2288.
  7. Harris, C.G. and Stephens, M. (1988), "A combined corner and edge detector", Alvey Vision Conference, 15(50) 10-5244. https://doi.org/10.5244/c.2.23.
  8. He, K., Zhang, X., Ren, S. and Sun, J. (2016), "Deep residual learning for image recognition", Proceedings of the IEEE Conference on Computer Vision and Pattern Recognition, 770-778.
  9. Jiang, M., Guo, G. and Mu, G. (2020), "Visual BMI estimation from face images using a label distribution based method", Comput. Vis. Image Understand., 197, 102985. https://doi.org/10.1016/j.cviu.2020.102985.
  10. Jo, E., Chun, H., Lee, S. and Hong, K. (2009), "Estimation of dynamic load and structural vibration on steel plate using transfer function", J. Asian Arch. Build. Eng., 8(2), 493-500. https://doi.org/10.3130/jaabe.8.493.
  11. Kang, I., Schulz, M.J., Kim, J.H., Shanov, V. and Shi, D. (2006), "A carbon nanotube strain sensor for structural health monitoring", Smart Mater. Struct., 15(3), 737. https://doi.org/10.1088/0964-1726/15/3/009.
  12. Kim, D. and Feng, M.Q. (2007), "Real-time structural health monitoring using a novel fiber-optic accelerometer system", IEEE Sensor. J., 7(4), 536-543. https://doi.org/10.1109/jsen.2007.891988.
  13. Kim, J., Sim, S., Cho, S., Yun, C. and Min, J. (2016), "Recent R&D activities on structural health monitoring in korea", Struct. Monit. Mainten., 3(1), 91-114. https://doi.org/10.12989/smm.2016.3.1.091.
  14. Kim, N.E., Lee, C.H. and Kim, S.Y. (2015), "Formula for equivalent impulsive force to predict vibrational response of high-frequency staircases", J. Korean Soc. Steel Constr., 27(2), 181-193. https://doi.org/10.7781/kjoss.2015.27.2.181.
  15. Kim, S., Pakzad, S., Culler, D., Demmel, J., Fenves, G., Glaser, S. and Turon, M. (2007), "Health monitoring of civil infrastructures using wireless sensor networks", Proceedings of the 6th International Conference on Information Processing in Sensor Networks, April.
  16. Korean Statistical Information Service (2018), "Statistics for 120 body parts (male)", https://stat.kosis.kr/statHtml_host/statHtml.do?orgId=115&tblId=TX_115190170&dbUser=NSI_IN_115.
  17. Kwon, S. and Suh, Y. (2009), "Development and application of the high speed weigh-in-motion for overweight enforcement", Int. J. Highw. Eng., 11(4), 69-78.
  18. Li, J., Hao, H., Fan, K. and Brownjohn, J. (2015), "Development and application of a relative displacement sensor for structural health monitoring of composite bridges", Struct. Control Hlth. Monit., 22(4), 726-742. https://doi.org/10.1002/stc.1714.
  19. Lim, J. and Yoon, H. (2019), "Real-time pedestrian dynamic-load localization using vision-based motion sensing", J. Korean Soc. Hazard Mitigat., 19(7), 323-330. https://doi.org/10.9798/kosham.2019.19.7.323.
  20. Lucas, B.D. and Kanade, T. (1981), "An iterative image registration technique with an application to stereo vision", Proceedings DARPA Image Understanding Workshop, 121-130.
  21. Lukezic, A., Vojir, T., Cehovin Zajc, L., Matas, J. and Kristan, M. (2017), "Discriminative correlation filter with channel and spatial reliability", Proceedings of the IEEE Conference on Computer Vision and Pattern Recognition, 6309-6318.
  22. Mills, K. (2017), "Suspension bridge with families walking across suddenly collapses sending dozens of people plummeting into the water below", https://www.mirror.co.uk/news/worldnews/suspension-bridge-families-walking-across-10614388.
  23. Mortimer, C. (2016), "Bali suspension bridge collapse kills eight people, including three children, and injures 30 others", https://www.independent.co.uk/news/world/asia/balisuspension-bridge-collapse-eight-people-dead-30-injured-yellow-bridge-klungkung-a7364871.html.
  24. Oh, B.K., Kim, D. and Park, H.S. (2017), "Modal response-based visual system identification and model updating methods for building structures", Comput.-Aid. Civil Infrastr. Eng., 32(1), 34-56. https://doi.org/10.1111/mice.12229.
  25. Park, J.C., Cho, J.S., Gil, H.B. and Shin, J.I. (2014), "Vision-based technology for structural health monitoring of bridges", Mag. Korea Inst. Struct Mainten. Inspect., 18(2), 10-16.
  26. Pastor, M., Binda, M. and Harcarik, T. (2012), "Modal assurance criterion". Procedia Engineering, 48, 543-548. https://doi.org/10.1016/j.proeng.2012.09.551.
  27. Pumarola, A., Sanchez-Riera, J., Choi, G., Sanfeliu, A. and Moreno-Noguer, F. (2019), "3dpeople: Modeling the geometry of dressed humans", Proceedings of the IEEE/CVF International Conference on Computer Vision, 2242-2251.
  28. Qin, T., Lin, M., Cao, M., Fu, K. and Ding, R. (2018), "Effects of sensor location on dynamic load estimation in weigh-in-motion system", Sensor., 18(9), 3044. https://doi.org/10.3390/s18093044.
  29. Song, J., Jin, H., Chung, Y., Lee, S., Nam, W. and Jang, D. (2008), "Web-based bridge monitoring system with wireless sensor network environment", J. Korean Soc. Hazard Mitigat., 8(5), 35-44.
  30. The Board of Audit and Inspection of Korea (2018), "On-site inspection of vulnerable leisure facilities", 2018-specific-056.
  31. Tomasi, C. and Kanade, T. (1991), Detection and Tracking of Point Features, CMU-CS-91-132.
  32. Van De Weijer, J., Schmid, C., Verbeek, J. and Larlus, D. (2009), "Learning color names for real-world applications", IEEE Trans. Image Proc., 18(7), 1512-1523. https://doi.org/10.1109/cvpr.2007.383218.
  33. Velardo, C. and Dugelay, J. (2012), "What can computer vision tell you about your weight?", Proceedings of the 20th European Signal Processing Conference (EUSIPCO), 1980-1984.
  34. Widianto, S., Davies, E. and Fernandez, C. (2020), "Collapse of footbridge over indonesia river kills at least nine", https://www.reuters.com/article/us-indonesia-bridge-idUSKBN1ZJ0G7.
  35. Yoon, H., Elanwar, H., Choi, H., Golparvar-Fard, M. and Spencer Jr., B.F. (2016), "Target-free approach for vision-based structural system identification using consumer-grade cameras", Struct. Control Hlth. Monit., 23(12), 1405-1416. https://doi.org/10.1002/stc.1850.
  36. Yoon, H., Shin, J. and Spencer Jr., B.F. (2018), "Structural displacement measurement using an unmanned aerial system", Comput.-Aid. Civil Infrastr. Eng., 33(3), 183-192. https://doi.org/10.1111/mice.12338.