DOI QR코드

DOI QR Code

Experimental study for application of the punch shear test to estimate adfreezing strength of frozen soil-structure interface

  • Park, Sangyeong (School of Civil, Environmental and Architectural Engineering, Korea University) ;
  • Hwang, Chaemin (School of Civil, Environmental and Architectural Engineering, Korea University) ;
  • Choi, Hangseok (School of Civil, Environmental and Architectural Engineering, Korea University) ;
  • Son, Youngjin (Eco Infra Solution Team, SK ecoplant) ;
  • Ko, Tae Young (Department of Energy and Resources Engineering, Kangwon National University)
  • Received : 2022.01.20
  • Accepted : 2022.03.10
  • Published : 2022.05.10

Abstract

The direct shear test is commonly used to evaluate the shear behavior of frozen soil-structure interfaces under normal stress. However, failure criteria, such as the Mohr-Coulomb failure criterion, are needed to obtain the unconfined shear strength. Hence, the punch shear test, which is usually used to estimate the shear strength of rocks without confinement, was examined in this study to directly determine the adfreezing strength. It is measured as the shear strength of the frozen soil-structure interface under unconfined conditions. Different soils of silica sand, field sand, and field clay were prepared inside the steel and concrete ring structures. Soil and ring structures were frozen at the target temperature for more than 24 h. A punch shear test was then conducted. The test results show that the adfreezing strength increased with a decrease in the target temperature and increase in the initial water content, owing to the increase in ice content. The adfreezing strength of field clay was the smallest when compared with the other soil specimens because of the large amount of unfrozen water content. The field sand with the larger normalized roughness showed greater adfreezing strength than the silica sand with a lower normalized roughness. From the experiment and analysis, the applicability of the punch shear test was examined to measure the adfreezing strength of the frozen soil-structure interface. To find a proper sample dimension, supplementary experiments or numerical analysis will be needed in further research.

Keywords

Acknowledgement

This research was supported by the National Research Foundation of Korea (NRF) grants funded by the Korea government (2019R1A2C2086647 and 2020R1A6A1A03045059).

References

  1. Anderson, D.M. and Tice, A.R. (1972), "Predicting unfrozen water contents in frozen soils from surface area measurements", Highway Res. Record, 393(2), 12-18. https://doi.org/10.1016/0022-4898(73)90017-7.
  2. Arenson, L.U., Johansen, M.M. and Springman, S.M. (2004), "Effects of volumetric ice content and strain rate on shear strength under triaxial conditions for frozen soil samples", Permafrost Periglacial Processes, 15(3), 261-271. https://doi.org/10.1002/ppp.498.
  3. Aukenthaler, M. (2016), "The Frozen & Unfrozen Barcelona Basic Model", M.S. Dissertation, Delft University of Technology.
  4. Burt, T.P. and Williams, P.J. (1976), "Hydraulic conductivity in frozen soils", Earth Surf. Processes, 1(4), 349-360. https://doi.org/10.1002/esp.3290010404.
  5. Choi, C. (2011), "A study on the effect of pile surface roughness on adfreeze bond strength", J. Korean GEO Environ. Soc., 12(12), 79-88.
  6. Di Donna, A., Ferrari, A. and Laloui, L. (2016), "Experimental investigations of the soil-concrete interface: physical mechanisms, cyclic mobilization, and behaviour at different temperatures", Can. Geotech. J., 53(4), 659-672. https://doi.org/10.1139/cgj-2015-0294@cgj-wgge.issue01.
  7. He, P., Mu, Y., Yang, Z., Ma, W., Dong, J. and Huang, Y. (2020), "Freeze-thaw cycling impact on the shear behavior of frozen soil-concrete interface", Cold Regions Sci. Tech., 173, 103024. https://doi.org/10.1016/j.coldregions.2020.103024.
  8. Jaeger, C. (1979), Rock Mechanics and Engineering, (2nd Edition), Cambridge University Press.
  9. Jin, H., Lee, J., Zhuang, L. and Byu, B.H. (2020), "Laboratory investigation of unconfined compression behavior of ice and frozen soil mixtures", Geomech. Eng., 22(3), 219-226. https://doi.org/10.12989/gae.2020.22.3.219.
  10. Ko, S.G. and Choi, C.H. (2011), "Experimental study on adfreeze bond strength between frozen sand and aluminium with varying freezing temperature and vertical confining pressure", J. Korean Geotech. Soc., 27(9), 67-76. https://doi.org/10.7843/kgs.2011.27.9.067.
  11. Ladanyi, B. (1995), "Frozen soil-structure interfaces", Studies Appl. Mech., 42, 3-33. https://doi.org/10.1016/S0922-5382(06)80004-8.
  12. Lee, J., Kim, Y. and Choi, C. (2013), "A study for adfreeze bond strength developed between weathered granite soils and aluminum plate", J. Korean Geoenviron. Soc., 14(12), 23-30. https://doi.org/10.14481/jkges.2013.14.12.023.
  13. Li, L.R., Deng, J.H., Liu, J.F., Zheng, J., Chen, T. and Deng, C.F. (2017), "A new understanding of punch-through shear testing", Geotechnique Lett., 7(2), 129-135. https://doi.org/10.1680/jgele.16.00123.
  14. Liu, J., Lv, P., Cui, Y. and Liu, J. (2014), "Experimental study on direct shear behavior of frozen soil-concrete interface", Cold Regions Sci. Technol., 104, 1-6. https://doi.org/10.1016/j.coldregions.2014.04.007.
  15. Nakazawa, N., Saeki, H., Ono, T., Takeuchi, T. and Kanie, S. (1988), "Ice forces due to changes in water level and adfreeze bond strength between sea ice and various materials", J. Offshore Mech. Arct. Eng., 110(1), 74-80. https://doi.org/10.1115/1.3257127.
  16. Parameswaran, V.R. (1978), "Adfreezing strength of frozen sand to model piles", Can. Geotech. J., 15(4), 494-500. https://doi.org/10.1139/t78-053.
  17. Peng-Fei, H.E., Yan-Hu, M.U., Wei, M.A., Huang, Y.T. and Jian-Hua, D.O.N.G. (2021), "Testing and modeling of frozen clay-concrete interface behavior based on large-scale shear tests", Adv. Climate Change Res., 12(1), 83-94. https://doi.org/10.1016/j.accre.2020.09.010.
  18. Quanbin, S., Ping, Y. and Guoliang, W. (2018), "Experimental research on adfreezing strengthsat the interface between frozen fine sand and structures", Scientia Iranica, 25(2), 663-674. https://doi.org/10.24200/SCI.2017.20005.
  19. Sayles, F.H. and Carbee, D.L. (1981), "Strength of frozen silt as a function of ice content and dry unit weight", Eng. Geol., 18(1-4), 55-66. https://doi.org/10.1016/0013-7952(81)90046-6.
  20. Sepaskhah, A.R., Tabarzad, A. and Fooladmand, H.R. (2010), "Physical and empirical models for estimation of specific surface area of soils", Arch. Agronomy Soil Sci., 56(3), 325-335. https://doi.org/10.1080/03650340903099676.
  21. Shirazi, M.A. and Boersma, L. (1984), "A unifying quantitative analysis of soil texture", Soil Sci. Soc. Am. J., 48(1), 142-147. https://doi.org/10.2136/sssaj1984.03615995004800010026x.
  22. Tang, L., Du, Y., Liu, L., Jin, L., Yang, L. and Li, G. (2020), "Effect mechanism of unfrozen water on the frozen soil-structure interface during the freezing-thawing process", Geomech. Eng., 22(3), 245-254. https://doi.org/10.12989/gae.2020.22.3.245.
  23. Terashima, T. (1997), "Comparative experiments on various adfreeze bond strength tests between ice and materials", WIT T. Eng. Sci., 14, 207-216. https://doi.org/10.2495/CON970211.
  24. Thomas, H.R., Cleall, P., Li, Y.C., Harris, C. and Kern-Luetschg, M. (2009), "Modelling of cryogenic processes in permafrost and seasonally frozen soils", Geotechnique, 59(3), 173-184. https://doi.org/10.1680/geot.2009.59.3.173.
  25. Uesugi, M. and Kishida, H. (1986), "Frictional resistance at yield between dry sand and mild steel", Soil. Found., 26(4), 139-149. https://doi.org/10.3208/sandf1972.26.4_139.
  26. Wang, D., Wang, T., Xu, D. and Zhou, G. (2020), "Estimation of spatial autocorrelation variations of uncertain geotechnical properties for the frozen ground", Geomech. Eng., 22(4), 339-348. https://doi.org/10.12989/gae.2020.22.4.339.
  27. Wang, S., Wang, Q., Qi, J. and Liu, F. (2018), "Experimental study on freezing point of saline soft clay after freeze-thaw cycling", Geomech. Eng., 15(4), 997-1004. https://doi.org/10.12989/gae.2018.15.4.997.
  28. Wang, T.L., Wang, H.H., Hu, T.F. and Song, H.F. (2019), "Experimental study on the mechanical properties of soil-structure interface under frozen conditions using an improved roughness algorithm", Cold Regions Sci. Tech., 158, 62-68. https://doi.org/10.1016/j.coldregions.2018.10.015.
  29. Wang, T., Zhou, G., Wang. J. and Wang, D. (2020), "Impact of spatial variability of geotechnical properties on uncertain settlement of frozen soil foundation around an oil pipeline", Geomech. Eng., 20(1), 19-28. https://doi.org/10.12989/gae.2020.20.1.019.
  30. Weaver, J.S. and Morgenstern, N.R. (1981), "Pile design in permafrost", Can. Geotech. J., 18(3), 357-370. https://doi.org/10.1139/t81-043.
  31. Wu, H., Kemeny, J. and Wu, S. (2017), "Experimental and numerical investigation of the punch-through shear test for mode II fracture toughness determination in rock", Eng. Fract. Mech., 184, 59-74. https://doi.org/10.1016/j.engfracmech.2017.08.006.
  32. Xu, Y., Yao, W., Xia, K. and Ghaffari, H.O. (2019), "Experimental study of the dynamic shear response of rocks using a modified punch shear method", Rock Mech. Rock Eng., 52(8), 2523-2534. https://doi.org/10.1007/s00603-019-1744-x.
  33. Zhang, Y., Cheng, Z. and Lv, H. (2019), "Study on failure and subsidence law of frozen soil layer in coal mine influenced by physical conditions", Geomech. Eng., 18(1), 97-109. https://doi.org/10.12989/gae.2019.18.1.097.
  34. Zhu, T. and Li, Y. (2021), "Impacts of Disk Rock Sample Geometric Dimensions on Shear Fracture Behavior in a Punch Shear Test", Comput. Model. Eng. Sci., 126(2), 455-475. https://doi.org/10.32604/cmes.2021.014284.
  35. Zhou, Z., Yang, H., Xing, K. and Gao, W. (2018), "Prediction models of the shear modulus of normal or frozen soil-rock mixtures", Geomech. Eng., 15(2), 783-791. https://doi.org/10.12989/gae.2018.15.2.783.