References
- W. J. Daukler, D. J. Resnick, W. A. Johnson, A. W. Yanof, A new operating regime for electroplating the gold absorber on x-ray masks, Microelectron. Eng., 23 (1994) 235-238. https://doi.org/10.1016/0167-9317(94)90145-7
- W. Chu, M. L. Schattenburg, H. I. Smith, Low-stress gold electroplating for x-ray masks, Microelectron. Eng., 17 (1992) 223-226. https://doi.org/10.1016/0167-9317(92)90046-T
- T. Osaka, Y. Okinakab, J. Sasano, M. Katod, Development of new electrolytic and electroless gold plating processes for electronics applications, Sci. Technol. Adv. Mater., 7 (2006) 425-437. https://doi.org/10.1016/j.stam.2006.05.003
- Y. Yoneda, K. Nakamura, Packaging technology for imaging LSI, Fujitsu, 63 (2012) 489-495.
- Y. Ejiri, T. Sakurai, Y. Arayama, K. Suzuki, Y. Tsbomatsu, S. Hatakeyama, S. Arike, Y. Hiroyama, K. Hasegawa, Electroless Ni/ Pd/Au plating for semiconductor package substrates (I) - Influence of the electroless Ni plating thickness on the solder ball joint reliability, J. Japan Inst. Electron. Packag., 15 (2012) 82-95. https://doi.org/10.5104/jiep.15.82
- J. W. Schulze, M.Datta, T. Osaka, Eds., Microelectronic packaging, CRC Press, FL, U.S.A. (2005).
- J. Jasper, D. Shiels, Gold bumps off the danger list, European Semiconductor, 22 (2000) 86.
- E. L. Wooten, K. M. Kissa, A. Y. Yan, E. J. Murphy, D. A. Lafaw, P. F. Hallemeier, D. Maack, D. V. Attanasio, D. J. Fritz, G. J. McBrien, D. E. Bossi, A review of lithium niobate modulators for fiber-optic communications systems, IEEE J. Sel. Top. Quantum Electron., 6 (2000) 69. https://doi.org/10.1109/2944.826874
- T. Hiramori, M. Ito, M. Yoshikawa, A. Hirose, K. F. Kobayashi, Interfacial reaction and joint strength of Sn-Ag base solders on electroless Ni-P/Au plating, J. Japan Inst. Electron. Packag., 6 (2003) 503-508. https://doi.org/10.5104/jiep.6.503
- B. Li, N. Li, G. Luo, D. Tian, Acceleration effect of Na2S2O3 on the immersion gold plating on Ni-P surface from a sulfite based electrolyte, Surf. Coat. Technol., 302 (2016) 202-207. https://doi.org/10.1016/j.surfcoat.2016.05.086
- T. Osaka, Y. Okinaka, J. Sasano, M. Kato, Development of new electrolytic and electroless gold plating processes for electronics applications, Sci. Technol. Adv. Mater., 7 (2006) 425-437. https://doi.org/10.1016/j.stam.2006.05.003
- F. H. Reid, W. Goldie, Gold plating technology, F. H. Reid and W. Goldie, Eds., Electrochemical Publications, Ltd., Ayr. Scotland, U.K. (1974).
- J. Ushio, O. Miyazawa, H . Yokono, A. Tomizawa, Electronic device plated with gold by means of an electroless gold plating solution, European Patent Application EP 021789, April 29 (1987)
- I. Takashi, Development of a Non-cyanide electroless gold plating bath, Surf. Finish. Soc. Jpn., 52 (2001) 410. https://doi.org/10.4139/sfj.52.410
- Y. Shindo, H. Honma, Study of noncyanide electroless gold plating, Proceeding of the 84th Surface Finishing Society of Japan, (1991) 163.
- Y. Sato, T. Osawa, K. Kaieda, K. Kobayakawa, Cyanide-free electroless gold plating from a bath containing disulfitoaurate and thiourea or its derivatives, Plat. Surf. Finish., 81 (1994) 74.
- A. Sullivan, P. A. Kohl, The autocatalytic deposition of gold in nonalkaline, gold thiosulfate electroless bath, J. Electrochem. Soc., 142 (1995) 2250. https://doi.org/10.1149/1.2044282
- T. Inoue, S. Ando, H. Okudaira, J. Ushio, A. Tomizawa, H. Takehara, T. Shimazaki, H. Yamamoto, H. Yokono, Stable non-cyanide electroless gold plating which is applicable to manufacturing of fine pattern printed wiring boards, Proccedding of 45th IEEE electronic Components Technology Conf., (1995) 1059.
- I. Takashi, S. Ando, J. Ushio, H. Okudaira, H. Takehara, T. Ota, H. Yamamoto, H. Yokono, A very stable non-cyanide electroless gold plating bath using thiourea and hydroquinone as a cooperating double reductant system, J. Surf. Finish. Soc. Jpn., 49 (1998) 1298-1304. https://doi.org/10.4139/sfj.49.1298
- M. Kato, K. NiKura, S. Hoshino, I. Ohno, Electrochemical behavior of electroless gold plating with ascorbic acid as a reducing agent, J. Surf. Finish. Soc. Jpn., 42 (1991) 729. https://doi.org/10.4139/sfj.42.729
- M. Kato, Y. Yazawa, Y. Okinaka, Electroless gold plating bath using ascorbic acid as reducing agent - Recent improvement, Proceedings of the AESF Technical Conference, 'SUR/FIN '95', (1995) 805.
- H. Honma, A. Hasegawa, S. Hotta, K. Hagiwara, Electroless gold plating by disulfiteaurate complex, Plating Surf. Finish., 82 (1995) 89-92.
- N. Hattori, K. Iwamatsu, K. Naito, K. Okuno, Y. Yazawa, K. Kuroiwa, M. Kato, Electroless gold plating technology for usage of ascorbic acid as reducing agent, Proceedings of the 2001 ICEP, (2001) 166.
- S. Dimitrijevic, M. R. Vujasinovic, V. Trujic, Non-cyanide electrolytes for gold. plating- a review, Int. J. Electrochem. Sci., 8 (2013) 6620-6646.
- D. Mason, Precious metals plating. II: Time for gold sulfite?, Plating Surf. Finish., 73 (1986) 20.
- Y. Okinaka, Significance of inclusions in electroplated gold films for electronics applications, Gold Bull., 33 (2000) 117. https://doi.org/10.1007/bf03215489
- P. A. Kohl, Eds., Modern electroplating, Joan Wiley&Sons Hoboken, Ontario, Canada (2010) 115.
- A. Gemmler, W. Keller, H. Ritcher and K. Ruess, High-performance gold plating for microdevices, Plating Surf. Finish., 81 (1994) 52.
- A. Maner, S. Harsch and W. Ehrfeld, Mass production of microdevices with extreme aspect ratios by electroforming, Plating Surf. Finish., 75 (1988) 60.
- T. A. Green, S. Roy, Speciation analysis of Au(I) electroplating baths containing sulfite and thiosulfate, J. Electrochem. Soc., 153 (2006) C157. https://doi.org/10.1149/1.2164724
- H. Nawafune, M. Tanikubo, S. Mizumoto, Electroless gold plating using L-cysteine as reducing agent & its deposition mechanism, Plating Surf. Finish., 90, (2003)
- Electroplating Research Society, Eds., Environmentally-coordinated plating technology, Daily Industrial Newspaper (2006) 62.
- The Korean Institute of Surface Engineering, Eds., Electroless plating, Practical Surface Treatment Technology (2014) 44.
- H. Sampei, Evaluation methods of solder wettability, J. Surf. Finish. Soc. Jpn., 58 (2007) 219. https://doi.org/10.4139/sfj.58.219