반도체디스플레이기술학회지 (Journal of the Semiconductor & Display Technology)

한국반도체디스플레이기술학회 (The Korean Society Of Semiconductor & Display Technology)
권호 표지

전면 유기발광 다이오드 제작시 Mg:Ag 캐소드 최적화 및 LiF 전자주입층 유무에 따른 소자 특성에 관한 연구

Optimization of Mg:Ag Cathodes and Effect of LiF Electron Injection Layer on the Characteristics of Top Emission Organic Light Emitting Diodes

  • 송민석 (가천대학교 전자공학과) ;
  • 권상직 (가천대학교 전자공학과) ;
  • 조의식 (가천대학교 전자공학과)
  • Song, Min Seok (Department of Electronic Engineering, Gachon University) ;
  • Kwon, Sang Jik (Department of Electronic Engineering, Gachon University) ;
  • Cho, Eou-Sik (Department of Electronic Engineering, Gachon University)
  • 투고 : 2022.02.23
  • 심사 : 2022.03.25
  • 발행 : 2022.03.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

For the process simplification in the fabrication of organic light emitting diode(OLED), top emission OLED (TEOLED) was fabricated without lithium fluoride(LiF) used as an electron injection layer (EIL). After co-deposition of Mg and Ag with a different process conditions, a cathode material adjacent to EIL was optimized when Mg and Ag have a ratio of 1:9 considering sheet resistance and transmittance. From the energy band diagram of TEOLED, band gap difference between Trisaluminium (Alq3) and Mg:Ag cathode show the difference of 0.4 eV according to the usage of LiF The fabricated TEOLED without LiF showed the improvement of 5.2 % and 2.7 % in the luminance and the current density comparing that with LiF. The results show there is no significant difference in OLED characteristics regardless of LIF layer in the TEOLED structures.

키워드

과제정보

본 논문은 산업통상자원부 '산업혁신인재성장지원사업'의 재원으로 한국산업기술진흥원(KIAT)의 지원을 받아 수행된 연구임(2020년 차세대 디스플레이 공정·장비·소재 전문인력 양성사업, 과제번호: P0012453). 본 성과는 또한 정부(과학기술정보통신부)의 재원으로 한국연구재단의 지원을 받아 수행된 연구임 (No. 2020R1F1A1076505).

참고문헌

  1. G.-R. Chen, J. Duan, S. Liu, G.-W. Yue, and M. Qian, "Optical calculation of transparency of Ag film cathode in top-emitting OLED applicatio", Comp. Mater. Sci,, Vol. 203, p111038, 2022. https://doi.org/10.1016/j.commatsci.2021.111038
  2. X. Zheng, Y. Liu, Y. Zhu, F. Ma, C. Feng, Y. Yu, H. Hu, and F. Li, "Efficient inkjet-printed blue OLED with boosted charge transport using host doping for application in pixelated display", Opt. Mater., Vol. 101, p109755, 2020. https://doi.org/10.1016/j.optmat.2020.109755
  3. K. Dhbaibi, L. Abella, S. Meunier-Della-Gatta, T. Roisnel, N. Vanthuyne, B. Jamoussi, G. Pieters, B. Racine, E. Quesnel, J. Autschbach, J. Crassous, and L. Favereau, "Achieving high circularly polarized luminescence with push-pull helicenic systems : from rationalized design to top-emission CP-OLED applications", Chem. Sci., Vol. 12, pp5522-5533, 2021. https://doi.org/10.1039/D0SC06895K
  4. S. Shin, H. W. Yoon, Y. Jang, and M. Hong, "Stoichiometric silicon nitride thin films for gas barrier, with applications to flexible and stretchable OLED encapsulation", Appl. Phys. Lett., Vol. 118, p181901, 2021. https://doi.org/10.1063/5.0050836
  5. W. Ren, K. R. Son, T. H. Park, V. Murugadoss, and T. G. Kim, "Manipulation of blue TADF top-emission OLEDs by the first-order optical cavity design: toward a highly pure blue emission and balanced charge transport", Photonics Research, Vol. 9, pp1502-1512, 2021 https://doi.org/10.1364/PRJ.432042
  6. J.-H. Oh and J.-W. Park, "Designing a solution-processable electron transport layer for transparent organic light-emitting diode", Org. Electron., Vol. 96, p106252, 2021. https://doi.org/10.1016/j.orgel.2021.106252
  7. W. S. Cho, J. Y. Park, S. Baek, C. S. Choi, S.-H. Cho, K. Hong, and J.-L. Lee, "Completely Hazy and Transparent Films by Embedding Air Gaps for Elimination of Angular Color Shift in Organic Light-Emitting Diodes", ACS Appl. Mater. Interfaces., Vol. 13, pp39660-39670, 2021. https://doi.org/10.1021/acsami.1c10273
  8. X. Chen, D. Wu, J. Wang, Y. Zhou, Z. Zhang, C. Li, J. Zhang, P. Chen, and Y. Duan, " A highly transparent laminated composite cathode for organic light-emitting diodes", Appl. Phys. Lett. Vol. 119, p073301, 2021. https://doi.org/10.1063/5.0057184
  9. J.-M. Lee, C. H. Kang, J. S. Yoo, H. W. Hwang, S. K. Hong, Y. M Ha, and B.-K. Ju, "Analysis and simulation of reddish overshoot in active matrix organic light-emitting diode display with varying p-doped hole transport layer concentrations ", Org. Electron., Vol. 99, p106328, 2021. https://doi.org/10.1016/j.orgel.2021.106328
  10. D.-G. Moon, "Vacuum thermal evaporated transparent cathodes for organic light-emitting devices", Vacuum Magazine, Vol. 1, pp19-23, 2014 https://doi.org/10.5757/vacmag.1.2.19
  11. J. T. Lim, C. H. Jeong, J. H. Lee, G. Y. Yeom, E.-C. Shin, E. H. Lee, and T. W. Kim, "High-Luminance Top-Emitting Organic Light- Emitting Diodes Using Cs/Al/Au as the Semitransparent Multimetal Cathode" Journal of The Electrochemical Society, Vol. 154, pp.J302-J305, 2007 https://doi.org/10.1149/1.2759842
  12. X. Chen, D. Wu, J. Wang, Y. Zhou, Z. Zhang, C. Li, J. Zhang, P. Chen, and Y. Duan, "A highly transparent laminated composite cathode for organic light-emitting diodes" Appl. Phys. Lett. Vol. 119, 073301, 2021 https://doi.org/10.1063/5.0057184