최적구조설계를 이용한 교정브라켓 성능향상에 관한 연구

A Study on Improvement of Correction Bracket Performance Using Optimal Structural Design

  • 이정화 (금오공과대학교 생산기술연구소) ;
  • 권현규 (금오공과대학교 기계시스템공학과) ;
  • 권동재 (금오공과대학교 기계시스템공학과) ;
  • 박상준 (금오공과대학교 기계시스템공학과) ;
  • 전유진 (금오공과대학교 기계시스템공학과)
  • Li, Jung Hua (Research Institute of Manufacturibg and Productivity Kum-oh National Institute of Technology) ;
  • Kweon, Hyun Kyu (School of Mechanical System Engineering, Kumoh National Institute of Technology) ;
  • Gwon, Dong Jae (School of Mechanical System Engineering, Kumoh National Institute of Technology) ;
  • Park, Sang Jun (School of Mechanical System Engineering, Kumoh National Institute of Technology) ;
  • Jeon, Yoo Jin (School of Mechanical System Engineering, Kumoh National Institute of Technology)
  • 투고 : 2022.01.27
  • 심사 : 2022.03.25
  • 발행 : 2022.03.31

초록

There has always been a demand for orthodontic treatment. Orthodontic treatment allows tooth to be arranged by flexible arch wire fixed with tooth-attached brackets. Arch wire generate constant pressure to tooth brackets which moves the teeth to proper place. When the bracket transmits force, the braced wing of the bracket may deform. Deformed tie wing will lead to lost tension of elastic ligature. Then, lacking grip between tie wing and ligature might delay the tooth movement. Furthermore, tooth brackets used for orthodontic treatment make contact with in direct oral surface and this cause feeling of irritation that comes from height of tooth braces. This study suggests an optimal teethe bracket design to make up for inconvenience by shorten the height of bracket and complement the shape of bracket to reduce strain rate using finite element analysis. As a result, new optimal design of teethe bracket indicates lower strain rate of the bracket wing and takes good effects of shorten body height in terms of convenience.

키워드

과제정보

이 연구는 금오공과대학교 대학 학술연구비로 지원되었음(2020년).

참고문헌

  1. Yoon, Y. S. and Jung, Y. H., "A Study of the Correlation between Image and Self-respect of Patients Who Have Teeth Braces", The Journal of Korean Academy of Dental Hygiene Education, VoL. 4, No. 1, pp. 81-91, 2004.
  2. Lee, S. W., Lim, Y. K. and Lee, D. Y., "Preference for Various Orthodontic Appliances", A Master's Thesis, Korea University, Republic of Korea, 2009.
  3. Arici S, Regan D., "Alternatives to ceramic brackets the tensile bondstrengths of two aesthetic brackets compared ex vivo with stainless steel foil-mesh bracket bases", Br J Orthod, Vol. 24, pp. 133-137, 1997. 1997. https://doi.org/10.1093/ortho/24.2.133
  4. Bazakidou E, Nanda RS, Duncanson MG Jr, Sinha P., "Evaluation of frictional resistance in esthetic brackets", Am J Orthod Dentofacial Orthop, Vol. 112, pp. 138-144, 1997.. https://doi.org/10.1016/S0889-5406(97)70238-5
  5. Cacciafesta V, Sfondrini MF, Ricciardi A, Scribante A, Klersy C, Auricchio F., "Evaluation of friction of stainless steel and esthetic self-ligating brackets in various bracket-archwire combinations", Am J Orthod Dentofacial Orthop, Vol. 124, pp. 395-402, 2003.. https://doi.org/10.1016/S0889-5406(03)00504-3
  6. Kim, A. H., "A Study on Orthodontic Clinic Patients' Treatment Hospital Determinants and Satisfaction", A Master's Thesis, Ewha Womans University, Republic of Korea, 2015.
  7. Choi JB, Byun SM, "According to the various ceramic surface treatments before and after thermocycling", The Journal of the KSFDM, Vol. 47, No. 2, pp. 83-92, 2020.
  8. Oh YJ, Oh SH, "Effects of Saliva Contamination on Shear Bond Strength with Conventional, Moisture Insensitive, and Self-Etching Primers", J Korean Acad Pediatr Dent, Vol. 46. No. 1, pp. 21-28, 2019. https://doi.org/10.5933/JKAPD.2019.46.1.21
  9. Lim, Y. H., "Factors Associate with Pain during Orthodontic Treatment", A Thesis for a Doctorate, Gachon University, Republic of Korea, 2013.
  10. Lim H-M, Lew KKK, Tat DKL., "A clinical investigation of the efficacy of low level laser therapy in reducing orthodontic postadjustment pain", Am J Orthod Dentofacial Orthop, Vol. 108, pp. 614-622, 1995. https://doi.org/10.1016/S0889-5406(95)70007-2
  11. Roth PM, Thrash WJ., "Effect of transcutaneous electrical nerve stimulation for controlling pain associated with orthodontic tooth movement", Am J Orthod Dentofacial Orthop, VoL. 90, pp. 132-138, 1986. https://doi.org/10.1016/0889-5406(86)90045-4
  12. Hwang J-Y, Tee C-H, Huang AT, Taft L., "Effectiveness of thera-bite wafers in reducing pain", J Clin Orthod, VoL. 28, pp. 291-292, 1994.
  13. Chung, Y. J., S. Ranjit and Kim, W. T., "Finite Element Study on the Stress and Deformation depending on Material Characteristics at Teeth Bracket", Korea Academy Industrial Cooperation Society, pp. 347-349, 2014.
  14. Pandurangan, H. and Varadaraju, M., "Comparative Finite Element Analysis of Bracket Deformation in Tie Wings and Slot Region during Simulated Torque", American Journal of Orthodontics and Dentofacial Orthopedics, VoL. 160, No. 4, pp. 588-593, 2021. https://doi.org/10.1016/j.ajodo.2021.01.019
  15. Lee, C. B., Lee, H. S. and Kim, J. G., "Comparison of Shear, Tensile and Shear/Tensile Combined Bonding Strengths in Bracket Base Configurations", The Korean Association of Orthodontics, VoL. 29, No. 5, pp. 599-611, 1999.
  16. Holt MH, Nanda RS, Duncanson MG., "Fracture Resistance of Ceramic Brackets during Arch Wire Torsion", Am J Orthod Dentofacial Orthop, VoL. 99, pp. 287-293, 1991. https://doi.org/10.1016/0889-5406(91)70010-T
  17. Rhodes RK, Duncanson MG., Nanda RS, Currier GF, "Fracture Strengths of Ceramic Brackets Subjected to Mesial-distal Archwire Tipping Forces", Angle Orthod, VoL. 62, pp. 67-76, 1992.
  18. Gunn S, Powers JM., "Strength of Ceramic Brackets in Shear and Torsion Tests", J Clin Orthod, VoL. 25, pp. 355-358, 1991.
  19. Lindauer SJ, Macon CR, Browning H, Rubenstein LK, Isaacson RJ., "Ceramic Bracket Fracture Resistance to Second Order Arch Wire Activations", Am J Orthod Dentofacial Orthop, VoL. 106, pp. 481-486, 1994. https://doi.org/10.1016/S0889-5406(94)70070-2
  20. Han, J. H., Chang, M. H., Lim, Y. K. and Lee, D. Y., "Fracture Resistance of Ceramic Brackets to Arch Wire Torsional Force", The Korean Association of Orthodontics, VoL. 37, No. 4, pp. 293-304, 2007.
  21. Rim KH, Yang X, Yoon JK, Kim YK and Iyu SJ, "Structural Analysis of a PCB Substrate System for Semiconductor", Journal of the Semiconductor & Display Technology, Vol. 10, No. 4, pp. 113-118, 2011.
  22. Chung YJ, Kim WT and Ranjit S., "Finite Element Optimized Study for Stress and Deformation in Mounting Surface of Teeth Orthodontic Bracket", Jou. of Korean Soc. of Mechanical Technology, Vol. 17, No. 2, pp. 355-361, 2015. https://doi.org/10.17958/ksmt.17.2.201504.355
  23. Park, S. J. and Jeon, Y. J., "A New Design of Orthodontic Bracket Using ANSYS", A Bachelor's Thesis, Kumoh National Institute of Technology, Republic of Korea, 2020.