한국건설순환자원학회논문집 (Journal of the Korean Recycled Construction Resources Institute)

한국건설순환자원학회 (Korean Recycled Construction Resources Institute)
권호 표지
DOI QR코드

DOI QR Code

2단계 배합을 사용한 순환잔골재 혼입 고성능 시멘트 모르타르의 내화성능 연구

Investigation on Fire Resistance of High-Performance Cement Motar with Recycled Fine Aggregate Mixed by Two-Stage Mixing Approach

  • 박성환 (부경대학교 건축.소방공학부) ;
  • 최준호 (부경대학교 소방공학과) ;
  • 이치영 (부경대학교 소방공학과) ;
  • 구민성 (부경대학교 소방공학과) ;
  • 정철우 (부경대학교 건축공학과)
  • Park, Sung-Hwan (Department of Architectural and Fire Protection Engineering, Pukyong National University) ;
  • Choi, Jun-Ho (Department of Fire Protection Engineering, Pukyong National University) ;
  • Lee, Chi Young (Department of Fire Protection Engineering, Pukyong National University) ;
  • Koo, Min-Sung (Department of Fire Protection Engineering, Pukyong National University) ;
  • Chung, Chul-Woo (Department of Architectural Engineering, Pukyong National University)
  • 투고 : 2021.12.06
  • 심사 : 2021.12.16
  • 발행 : 2022.03.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

본 연구는 천연골재 부족사태에 대응하기 위한 방법으로, 콘크리트 구조물에 구조용 골재로서 순환골재의 재활용 가능성을 확인하기 위하여 진행되었다. Tam et al.에 의해 개발된 2단계 배합은 별도의 설비 등의 추가 없이 순환골재 혼입 시멘트 복합체의 역학적 성능을 향상시킬 수 있는 방법으로 알려져 있는데, 본 연구에서는 선행연구에서 확인한 개선된 형태의 2단계 배합방법을 활용하여 순환잔골재 혼입 모르타르 시험체를 제작하고, 이를 통해 배합방법의 차이가 순환잔골재 혼입 고강도 모르타르의 압축강도 및 내화성능에 미치는 영향을 확인하고자 하였다. 실험결과에 따르면 순환잔골재 사용시 일반배합 보다 2단계 배합방법을 활용하는 것이 순환잔골재 혼입 모르타르의 강도발현에 더욱 효과적인 것으로 나타났으며, 600 ℃ 및 900 ℃의 고온에 노출시켜 역학적 성능의 변화를 확인한 결과 2단계 배합을 활용하는 경우 모르타르의 잔존강도가 일반배합을 활용한 모르타르의 잔존강도보다 높게 나타나는 결과를 보였다. 이는 2단계 배합의 적극적 활용을 통해서, 순환잔골재로 고성능 시멘트 복합체의 제조가 가능함을 의미한다.

This study was conducted to confirm the applicability of recycled aggregates as aggregates for structural concrete as a way to respond to the shortage of natural aggregates. The two-stage mixing approach developed by Tam et al. is known to be a method that can improve the mechanical performance of recycled aggregate concrete without the installation of new additional facilities. In this work, modified version of two stage mixing approach, which was used in our earlier work, was introduced to prepare mortar specimens with recycled fine aggregate, and the compressive strength and fire resistance were compared to mortar mixed with normal mixing approach. According to the experimental results from mortar with recycled fine aggregate, the use of two-stage mixing approach was found to be more effective than normal mixing approach for compressive strength development. In addition, the residual strengths of the mortar with two-stage mixing approach was higher than mortar made of normal mixing approach after exposure to 600 and 900 ℃. It is possible to manufacture high-performance cement composites with recycled fine aggregates through the active use of the two-stage mixing approach.

키워드

과제정보

이 논문은 2021년도 국립대학육성사업 지원비에 의하여 연구되었다. 실험의 준비 및 실험과정에서 손정진, 김성우, 최유진 학생의 도움에 감사드린다.

참고문헌

  1. Ahn, B.H. (2018). Performance and Field Application of Rural and Fishing Village Road Concrete Pavement using Air Cooled Blast Furnace Slag Aggregates, Ph.D Thesis, Gongju University, 145.
  2. American Society for Testing and Materials C 109. (2020). Standard Test Method for Compressive Strength of Hydraulic Cement Mortars(Using 2-in. or [50 mm] Cube Specimens), West Conshohocken: ASTM International.
  3. American Society for Testing and Materials C 305. (2020). Standard Practice for Mechanical Mixing of Hydraulic Cement Pastes and Mortars of Plastic Consistency West Conshohocken: ASTM International.
  4. Ju, M., Park, K., Park, W.J. (2019). Mechanical behavior of recycled fine aggregate concrete with high slump property in normal-and high-strength, International Journal of Concrete Structures and Materials, 13(1), 1-13. https://doi.org/10.1186/s40069-018-0311-2
  5. Kim, J.H. (2019). A Study on the Quality Improvement Methods of Recycled Fine Aggregate for Manufacturing of High Quality Recycled Aggregate Concrete, Ph.D Thesis, Graduate School of Architecture, Konkuk University.
  6. Kim, J.H., Sung, J.H., Kim, C.G., Lee, S.H., Kim, H.S. (2018). An experimental study on the improvement of quality of mixed aggregate using recycled aggregate, Journal of the Korean Recycled Construction Resources Institute, 6(4), 229-235. https://doi.org/10.14190/JRCR.2018.6.4.229
  7. Kim, N.H., Yang, S.C. (2012). Evaluation of impurity content criteria of recycled aggregate for lean concrete base, International Journal of Highway Engineering, 14(3), 69-76. https://doi.org/10.7855/IJHE.2012.14.3.069
  8. Kim, Y.J., Kim, G.W., Chung, C.W. (2020). Contribution of two-stage mixing approach on compressive strength of mortar made of recycled fine aggregate, Journal of the Korean Recycled Construction Resources Institute, 8(4), 490-497. https://doi.org/10.14190/JRCR.2020.8.4.490
  9. Korea Institute of Construction Technology (2002). Policy and Technology Development for Promotion of Recycling of Construction Waste, Korea Institute of Construction Technology.
  10. Park, J.H. (2008). Study on the Practical Recycling Strategy of Construction Wastes, Master's Thesis, Chungang University.
  11. Seo, C.H., Kim, B.Y. (2005). An experimental study on the durability of recycled aggregate concrete, Journal of the Korea concrete Institute, 17(3), 385-392. https://doi.org/10.4334/JKCI.2005.17.3.385
  12. Shin, J.H., Kim, H.S., Chung, L., Ha, J.S. (2016). Pore structure and physical properties of heterogeneous bonding materials of recycled aggregate according to carbonation reforming, Journal of the Korea Concrete Institute, 28(3), 341-348. https://doi.org/10.4334/JKCI.2016.28.3.341
  13. Tam, V.W., Gao, X.F., Tam, C.M. (2005). Microstructural analysis of recycled aggregate concrete produced from two-stage mixing approach, Cement and Concrete Research, 35(6), 1195-1203. https://doi.org/10.1016/j.cemconres.2004.10.025
  14. Tam, V.Y., Gao, X.F., Tam, C.M. (2006). Comparing performance of modified two-stage mixing approach for producing recycled aggregate concrete, Magazine of Concrete Research, 58(7), 477-484. https://doi.org/10.1680/macr.2006.58.7.477
  15. Tam, V.W., Tam, C.M. (2007). Assessment of durability of recycled aggregate concrete produced by two-stage mixing approach, Journal of Materials Science, 42(10), 3592-3602. https://doi.org/10.1007/s10853-006-0379-y
  16. Tam, V.W., Tam, C.M., Wang, Y. (2007). Optimization on proportion for recycled aggregate in concrete using two-stage mixing approach, Construction and Building Materials, 21(10), 1928-1939. https://doi.org/10.1016/j.conbuildmat.2006.05.040