Wind and Structures

  • 제34권3호
  • /
  • Pages.259-274
  • /
  • 2022
  • /
  • 1226-6116(pISSN)
  • /
  • 1598-6225(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Aerodynamic shape optimization of a high-rise rectangular building with wings

  • Paul, Rajdip (Department of Civil Engineering, Hooghly Engineering & Technology College) ;
  • Dalui, Sujit Kumar (Department of Civil Engineering, Indian Institute of Engineering Science and Technology)
  • 투고 : 2021.05.05
  • 심사 : 2022.01.09
  • 발행 : 2022.03.25
⟨ 이전 논문 다음 논문 ⟩

초록

The present paper is focused on analyzing a set of Computational Fluid Dynamics (CFD) simulation data on reducing orthogonal peak base moment coefficients on a high-rise rectangular building with wings. The study adopts an aerodynamic optimization procedure (AOP) composed of CFD, artificial neural network (ANN), and genetic algorithm (G.A.). A parametric study is primarily accomplished by altering the wing positions with 3D transient CFD analysis using k - ε turbulence models. The CFD technique is validated by taking up a wind tunnel test. The required design parameters are obtained at each design point and used for training ANN. The trained ANN models are used as surrogates to conduct optimization studies using G.A. Two single-objective optimizations are performed to minimize the peak base moment coefficients in the individual directions. An additional multiobjective optimization is implemented with the motivation of diminishing the two orthogonal peak base moments concurrently. Pareto-optimal solutions specifying the preferred building shapes are offered.

키워드

참고문헌

  1. Aboshosha, H., Elshaer, A., Bitsuamlak, G. and El Damatty, A. (2017), "Enhancing wind performance of tall buildings using corner aerodynamic optimization", J. Wind Eng. Ind. Aerod., 142, 198-216. https://doi.org/10.1016/j.engstruct.2017.01.019.
  2. Bairagi, A.K. and Dalui, S.K. (2020), "Forecasting of Wind Induced Pressure on Setback Building Using Artificial Neural Network", Periodica Polytechnica Civil Eng., 64(3), 751-763. https://doi.org/10.3311/PPci.15769.
  3. Bairagi, A.K. and Dalui, S.K. (2021), "Wind Environment Around the Setback Building Models", Build. Simulation, 14, 1525-1541. https://doi.org/10.1007/s12273-020-0758-3.
  4. Balendra, T., Anwar, M.P. and Tey, K.L. (2005),"Direct Measurement of Wind-induced Displacements in Tall Building Models Using Laser Positioning Technique", J. Wind Eng. Ind. Aerod., 93(5), 399-412, 2005. https://doi.org/10.1016/j.jweia.2005.03.003.
  5. Bernardini, E., Spence, S., Wei, D. and Kareem, A. (2015), "Aerodynamic shape optimization of civil structures, a CFD-enabled kriging-based approach", J. Wind Eng. Ind. Aerod., 144, 154-164. https://doi.org/10.1016/j.jweia.2015.03.011.
  6. Bhattacharyya, B., Dalui, S.K. and Ahuja, A.K. (2014), "Wind induced pressure on 'E' plan shaped tall buildings", Jordon J. Civil Eng., 8(2), 120-134.
  7. Chakraborty, S., Dalui, S.K. and Ahuja, A.K. (2014), "Wind Load on irregular plan shaped tall building- A case study", Wind Struct, 18(6), 59-73. https://doi.org/10.12989/was.2014.19.1.059.
  8. Chakraborty, S., Dalui, S.K. and Ahuja, A.K. (2014b), "Experimental and numerical study of surface pressure on "+" plan shape tall building", Jordon J. Civil Eng., 8(3), 251-262. https://doi.org/10.1061/(ASCE)ST.1943-541X.0002686.
  9. Daemei, A.B. and Eghbali, S.R. (2019), "Study on aerodynamic shape Optimization of tall buildings using architectural modifications in order to reduce wake region", Wind Struct., 29(2), 139-147. https://doi.org/10.12989/was.2019.29.2.139.
  10. Dagnew, A.K. and Bitsuamlak, G.T. (2013), "Computational evaluation of wind loads on buildings: A review", Wind Struct., 16(6), 629-660. https://doi.org/10.12989/was.2013.16.6.629.
  11. Dagnew, A.K. and Bitsuamlak, G.T. (2014), "Computational evaluation of wind loads on a standard tall building using LES", Wind Struct., 18(5), 567-598. https://doi.org/10.12989/was.2014.18.5.567.
  12. David Hunter, D. and Yu, H. (2012), "Selection of Proper Neural Network Sizes and Architectures-A Comparative Study", IEEE Transactions Ind. Informatics, 8(2), 228-240. https://doi.org/10.1109/TII.2012.2187914.
  13. Donald, M. (1963), "An Algorithm for Least-Squares Estimation of Nonlinear Parameters", SIAM J. Appl. Mathem., 11(2), 431-441. https://doi.org/10.1137/0111030.
  14. Elshaer, A., Bitsuamlak, G. and Damatty, A. El. (2015), "Aerodynamic shape optimization for corners of tall buildings using CFD", 14th International Conference on Wind Engineering (ICWE), At Porto Alegre, Brazil. June.
  15. Elshaer, A., Bitsuamlak, G. and Damatty, A. El. (2016), "Aerodynamic shape optimization of tall buildings using twisting and corner modifications", 8th International Colloquium on Bluff Body Aerodynamics and Applications, Northeastern University, Boston, Massachusetts, USA. June.
  16. Elshaer, A., Bitsuamlak, G. and El Damatty, A. (2017), "Enhancing wind performance of tall buildings using corner aerodynamic optimization", Eng. Struct., 136, 133-148. https://doi.org/10.1016/j.engstruct.2017.01.019.
  17. Elshaer, A. and Bitsuamlak, G. (2018), "Multiobjective aerodynamic optimization of tall building openings for wind-induced load reduction", J. Struct. Eng., 144(10), 04018198. https://doi.org/10.1061/(ASCE)ST.1943-541X.0002199.
  18. Gu, M. and Xie Z.N. (2011), "Interference effects of two and three super-tall buildings under wind action", Acta Mechanica Sinica, 27(5), 687-696. https://doi.org/10.1007/s10409-011-0498-9.
  19. Hagan, M.T. and Menhaj, M.B. (1994), "Training feed-forward networks with the Marquardt algorithm", IEEE Transactions Neural Networks, 5(6), 989-993. https://doi.org/10.1109/72.329697.
  20. Irwin, P.A. (2007), "Bluff body aerodynamics in wind engineering", J. Wind Eng. Ind. Aerod., 96(6-7), 701-712. https://doi.org/10.1016/j.jweia.2007.06.008.
  21. I.S: 875 (Part-3) (2015), Code of Practice for The Design Loads (Other than Earthquake) for Buildings And Structures (Part-3, Wind Loads), New Delhi, India.
  22. Kareem, A. (1986), "The effect of Aerodynamic interference on the dynamic response of prismatic structures", J. Wind Eng. Ind. Aerod., 25(3), 365-372. https://doi.org/10.1016/0167-6105(87)90028-6
  23. Kareem, A., Spence, S., Bernardini, E., Bobby, S. and Wei, D. (2013), "Using computational fluid dynamics to optimize tall building design", CTBUH J., Issue III, 38-43. 10.1016/0167-6105(87)90028-6.
  24. Kenneth, L. (1944), "A Method for the Solution of Certain Non-Linear Problems in Least Squares", Quart. Appl. Mathem., 2(2), 164-168. https://doi.org/10.1090/qam/10666
  25. Kijewski, T. and Kareem, A. (1998), "Dynamic wind effects: A comparative study of provisions in codes and standards with wind tunnel data", Wind Struct., 1(1), 77-109. https://doi.org/10.12989/was.1998.1.1.077.
  26. Kim, Y., You, K. and Ko, N. (2008), "Across-wind Responses of an Aeroelastic Tapered Tall Building", J. Wind Eng. Ind. Aerod., 96(8-9), 1307-1319. 10.1016/j.jweia.2008.02.038.
  27. Kwok, K.C.S., Hitchcock, P.A. and Burton, M.D. (2009), "Perception of Vibration and Occupant Comfort in Wind Excited Tall Buildings", J. Wind Eng. Ind. Aerod., 97(7-8), 368-380. https://doi.org/10.1016/j.jweia.2009.05.006.
  28. Li, Y., Tian, X., Tee, K.F., Li, Q.S. and Li, Y.G. (2018), "Aerodynamic treatments for reduction of wind loads on High-rise Building", J. Wind Eng. Ind. Aerod., 172, 107-115. https://doi.org/10.1016/j.jweia.2017.11.006.
  29. Liang, S., Li, Q.S., Lui, S., Zhang, L. and Gu, M. (2004), "Torsional dynamic wind loads on rectangular tall buildings", Eng. Struct., 26(1), 129-137. https://doi.org/10.1016/j.engstruct.2003.09.004.
  30. Lin, N., Letchford, C., Tamura, Y. and Liang, B. (2004), "Characteristics of wind forces acting on tall buildings", J. Wind Eng. Ind. Aerod., 93(3), 217-242. https://doi.org/10.1016/j.jweia.2004.12.001.
  31. Mallick, M. and Mohanta, A. (2019), "Prediction of wind-induced mean pressure coefficients using GMDH neural network", J. Aeros. Eng., 33(1), 1-17. https://orcid.org/0000-0002-6025-266X.
  32. MATLAB (2016), TheMathWorks, Massachusetts, United States.
  33. Melbourne, W.H. (1993), "Turbulence and the leading edge phenomenon", J. Wind Eng. Ind. Aerod., 49(1-3), 45-63. https://doi.org/10.1016/0167-6105(93)90005-9.
  34. Muehleisen, R.T. and Patrizi, S. (2013), "A new parametric equations for the wind pressure coefficient for low-rise buildings", Energy Build., 57, 245-249. https://doi.org/10.1016/j.enbuild.2012.10.051.
  35. Nikose, T.J. and Sonparote, R.S. (2018), "Dynamic along wind response of tall buildings using Artificial Neural Network", Cluster Comput., 22(4), 1-16. https://doi.org/10.1007/s10586-018-2027-0.
  36. Paul, R. and Dalui, S.K. (2016), "Wind effects on 'Z' plan-shaped tall building: A case study", Int. J. Adv. Struct. Eng., 8(3), 319-335. https://doi.org/10.1007/s40091-016-0134-9.
  37. Paul, R. and Dalui, S.K. (2020), "Prognosis of wind-tempted mean pressure coefficients of cross-shaped tall buildings using artificial neural network", Periodica Polytechnica Civil Engineering, 64(4), 1124-1143. https://doi.org/10.3311/PPci.16311.
  38. Paul, R. and Dalui, S.K. (2020), "Shape optimization to reduce wind pressure on the surfaces of a rectangular building with horizontal limbs", Periodica Polytechnica Civil Eng., 65(1), 134-149. https://doi.org/10.3311/PPci.16888.
  39. Paul, R. and Dalui, S.K. (2021), "Optimization of alongwind and crosswind force coefficients on a tall building with horizontal limbs using surrogate modeling", Struct. Des. Tall Spec. Buildings, 30(4). https://doi.org/10.1002/tal.1830.
  40. Revuz, J., Hargreaves, D.M. and Owen, J.S. (2012), "On the domain size for the steady-state CFD modelling of a tall building", Wind Struct., 15(4), 313-329. https://doi.org/10.12989/was.2012.15.4.313
  41. Sanyal, P. and Dalui, S.K. (2021), "Effects of internal angle between limbs of "Y" plan shaped tall building under wind load", J. Build. Eng., 33. https,//doi.org/10.1016/j.jobe.2020.101843.
  42. Sun, F. and Gu, M. (2014), "A numerical solution to fluid-structure interaction of membrane structures under wind action", Wind Struct., 19(1), 35-58. https://doi.org/10.12989/was.2014.19.1.035.
  43. Surry, D. and Djakovich, D. (1995). "Fluctuating pressures on models of tall buildings", J. Wind Eng. Ind. Aerod., 58(1-2), 81-112. https://doi.org/10.1016/0167-6105(95)00015-J.
  44. Tominaga, Y. and Stathopoulos, T. (2012), "CFD modelling of pollution dispersion in building array, evaluation of turbulent scalar flux modelling in RANS model using LES results", J. Wind Eng. Ind. Aerod., 104-106(May-July), 484-491. https://doi.org/10.1016/j.jweia.2012.02.004.
  45. Vyavahare, A.Y., Godbole, P.N. and Nikose, T. (2012), "Analysis of tall building for across wind response", Int. J. Civil Struct. Eng., 2(3).
  46. Verma, S.K., Kumar, K. and Kaur, H. (2014), "Estimation of coefficient of pressure in high-rise buildings using artificial neural network", Int. J. Eng. Res. Appl., 4(4), 105-110.
  47. Van Druenen, T., van Hooff, T., Montazeri, H. and Blocken, B. (2019), "CFD evaluation of building geometry modifications to reduce pedestrian-level wind speed", Build. Environ., 63, 106293. https://doi.org/10.1016/j.buildenv.2019.106293.
  48. Wang, J. and Cheng, C.M. (2010), "The application of artificial neural networks to predict wind spectra for rectangular cross-section buildings", The Fifth International Symposium on Computational Wind Engineering (CWE2010), Chapel Hill, North Carolina, May.
  49. Xie. J. (2012), "Aerodynamic optimization in super-tall building designs", The Seventh International Colloquium on Bluff Body Aerodynamics and its Applications (BBAA7), Shanghai, China. September.
  50. Zhang, A. and Gu, M. (2008), "Wind tunnel tests and numerical simulations of wind pressures on buildings in staggered arrangement", J. Wind Eng. Ind. Aerod., 96(10-11), 2067-2079. https://doi.org/10.1016/j.jweia.2008.02.013.
  51. Zhi, L., Chen, B. and Fang, M. (2015), "Wind load estimation of super-tall buildings based on response data", Struct. Eng. Mech., 56(4), 625-648. https://doi.org/10.12989/sem.2015.56.4.625.
  52. Xin, Q. (2011), Diesel Engine System Design, Woodhead Publishing in Mechanical Engineering, Sawston, Cambridge.