Acknowledgement
This study was financially supported under the Basic Science Research Program (2019R1A2C1089494) and the framework of the international cooperation program (2020K1A3A1A19088692), funded by the National Research Foundation of Korea (NRF) under the India-Korea International Cooperation Program.
References
- A. R. Tabar, A. A. Hamidi and H. Ghadamian, "Experimental investigation of CNG and gasoline fuels combination on a 1.7 L bi-fuel turbocharged engine", International Journal of Energy and Environmental Engineering, Vol. 8, No. 1, 2017, pp. 37~45. https://doi.org/10.1007/s40095-016-0223-3
- M. U. Aslam, H. H. Masjuki, M. A. Kalam, H. Abdesselam, T. M. I. Mahlia and M. A. Amalina, "An experimental investigation of CNG as an alternative fuel for a retrofitted gasoline vehicle, Fuel, Vol. 85, No. 5~6, 2006, pp. 717~724. https://doi.org/10.1016/j.fuel.2005.09.004
- M. I. Jahirul, H. H. Masjuki, R. Saidur, M. A. Kalam, M. H. Jayed and M. A. Wazed, "Comparative engine performance and emission analysis of CNG and gasoline in a retrofitted car engine, Applied Thermal Engineering, Vol. 30, No. 14-15, 2010, pp. 2219~2226. https://doi.org/10.1016/j.applthermaleng.2010.05.037
- Sudhir Kumar Pathak, Ashish Nayyar and Varun Goel, Optimization of EGR effects on performance and emission parameters of a dual fuel (Diesel + CNG) CI engine: An experimental investigation, Fuel, Vol. 291, 2021, 120183. https://doi.org/10.1016/j.fuel.2021.120183
- S. Sahoo and D. K. Srivastava, "Effect of compression ratio on engine knock, performance, combustion and emission characteristics of a bi-fuel CNG engine", Energy, Vol. 233, 2021, pp. 121144. https://doi.org/10.1016/j.energy.2021.121144
- M. R. O. Panao, A. L. N. Moreira and D. F. G. Durao, "Effect of a cross-flow on spray impingement with port fuel injection systems for HCCI engines, Fuel, Vol. 106, 2013, pp. 249~257. https://doi.org/10.1016/j.fuel.2012.11.039
- Trujillo MF, Mathews WS, Lee CF, Peters JE. Modelling and experiment of impingement and atomization of a liquid spray on a wall. International Journal of Engine Research, Vol. 1, 2000, pp. 87~105. https://doi.org/10.1243/1468087001545281
- H. Yu, X. Liang, G. Shu, Y. Wang and H. Zhang, "Experimental investigation on spray-wall impingement characteristics of n-butanol/diesel blended fuels, Fuel, Vol. 182, 2016, pp. 248~258. https://doi.org/10.1016/j.fuel.2016.05.115
- J. Yu, V. Vuorinen, H. Hillamo, T. Sarjovaara, O. Kaario and M. Larmi, "An experimental investigation on the flow structure and mixture formation of low pressure ratio wall-impinging jets by a natural gas injector, Journal of Natural Gas Science and Engineering, Vol. 9, 2012, pp. 1~10. https://doi.org/10.1016/j.jngse.2012.05.003
- W. Du, Q. Zhang, W. Bao and J. Lou, "Effects of injection pressure on spray structure after wall impingement, Applied Thermal Engineering, Vol. 129, pp. 1212~1218, Jan. 2018. https://doi.org/10.1016/j.applthermaleng.2017.10.083
- S. W. Park and C. S. Lee, "Macroscopic and microscopic characteristics of a fuel spray impinged on the wall, Experiments in Fluids, Vol. 37, No. 5, pp. 745~762, Nov. 2004. https://doi.org/10.1007/s00348-004-0866-3
- R. Mahmud, T. Kurisu, K. Nishida, Y. Ogata, J. Kanzaki and O. Akgol, "Effects of injection pressure and impingement distance on flat-wall impinging spray flame and its heat flux under diesel engine-like condition, Advances in Mechanical Engineering, Vol. 11, No. 7, Jul. 2019.
- M. Chang and S. Park, "Spray characteristics of direct injection injectors with different nozzle configurations under flash-boiling conditions, International Journal of Heat and Mass Transfer, Vol. 159, 2020.