DOI QR코드

DOI QR Code

Vibration characteristic of rubber isolation plate-shell integrated concrete liquid-storage structure

  • Cheng, Xuansheng (Western Engineering Research Center of Disaster Mitigation in Civil Engineering of the Ministry of Education, Lanzhou University of Technology) ;
  • Qi, Lei (Western Engineering Research Center of Disaster Mitigation in Civil Engineering of the Ministry of Education, Lanzhou University of Technology) ;
  • Zhang, Shanglong (Western Engineering Research Center of Disaster Mitigation in Civil Engineering of the Ministry of Education, Lanzhou University of Technology) ;
  • Mu, Yiting (Key Laboratory of Disaster Prevention and Mitigation in Civil Engineering of Gansu Province, Lanzhou University of Technology) ;
  • Xia, Lingyu (Key Laboratory of Disaster Prevention and Mitigation in Civil Engineering of Gansu Province, Lanzhou University of Technology)
  • 투고 : 2021.06.24
  • 심사 : 2021.12.19
  • 발행 : 2022.03.25

초록

To obtain the seismic response of lead-cored rubber, shape memory alloy (SMA)-rubber isolation Plate-shell Integrated Concrete Liquid-Storage Structure (PSICLSS), based on a PSICLSS in a water treatment plant, built a scale experimental model, and a shaking table test was conducted. Discussed the seismic responses of rubber isolation, SMA-rubber isolation PSICLSS. Combined with numerical model analysis, the vibration characteristics of rubber isolation PSICLSS are studied. The results showed that the acceleration, liquid sloshing height, hydrodynamic pressure of rubber and SMA-rubber isolation PSICLSS are amplified when the frequency of seismic excitation is close to the main frequency of the isolation PSICLSS. The earthquake causes a significant leakage of liquid, at the same time, the external liquid sloshing height is significantly higher than internal liquid sloshing height. Numerical analysis showed that the low-frequency acceleration excitation causes a more significant dynamic response of PSICLSS. The sinusoidal excitation with first-order sloshing frequency of internal liquid causes a more significant sloshing height of the internal liquid, but has little effect on the structural principal stresses. The sinusoidal excitation with first-order sloshing frequency of external liquid causes the most enormous structural principal stress, and a more significant external liquid sloshing height. In particular, the principal stress of PSICLSSS with long isolation period will be significantly enlarged. Therefore, the stiffness of the isolation layer should be properly adjusted in the design of rubber and SMA-rubber isolation PSICLSS.

키워드

과제정보

This paper is a part of the National Natural Science Foundation of China (Grant number: 51968045).

참고문헌

  1. Cao, S., Ozbulut, O.E., Wu, S., Sun, Z. and Deng, J. (2020), "Multi-level SMA/lead rubber bearing isolation system for seismic protection of bridges", Smart Mater. Struct., 29(5), 055045. https://doi.org/10.1088/1361-665X/ab802b.
  2. Cheng, X., Liu, B., Cao, L., Yu, D. and Feng, H. (2018b), "Dynamic response of a base-isolated CRLSS with baffle", Struct. Eng. Mech., 66(3), 411-421. http://doi.org/10.12989/sem.2018.66.3.411.
  3. Cheng, X., Qi, L., Jing, W. and Zhang, S. (2021), "Seismic responses and design recommendations for a plate-shell integrated concrete liquid-storage structure", Struct., 32, 461-473. https://doi.org/10.1016/j.istruc.2021.03.061.
  4. Cheng, X.S., Jing, W., Du, Y.F., Bao, C. and Wu, Z.T. (2018a), "Study on shock mitigation of concrete rectangular liquid storage structure with sliding shock insulator and limiting devices based on shaking table test", China Civil Eng. J., 51(12), 120-132.
  5. Choi, E., Nam, T.H. and Cho, B.S. (2005), "A new concept of isolation bearings for highway steel bridges using shape memory alloys", Can. J. Civil Eng., 32(32), 957-967. https://doi.org/10.1139/l05-049.
  6. Dai, Z., Zhang, L., Bolandi, S.Y. and Habibi, M. (2021), "On the vibrations of the non-polynomial viscoelastic composite open-type shell under residual stresses", Compos. Struct., 263, 113599. https://doi.org/10.1016/j.compstruct.2021.113599.
  7. Fulin, Z., Hongchao, C., Shigetaka, A.B.E., Xilin, L., Yuping, S., Zhenbao, L., ... & Lianjin, B. (2012), "Inspection report of the disaster of the East Japan earthquake by Sino-Japanese joint mission", Build. Struct., 42(4), 1-20. https://doi.org/10.19701/j.jzjg.2012.04.001.
  8. Gao, L., Guo, E.D. and Wang, X.J. (2012), "Earthquake damage analysis of pools in water supply system", J. Nat. Disast., 05, 122-128. https://doi.org/10.1007/s11783-011-0280-z.
  9. Guo, E.D. and Miao, C.G. (2014), Lifeline Project Earthquake Damage Atlas, Seismological Press, Beijing, China.
  10. Jadhav, M.B. and Jangid, R.S. (2004), "Response of base-isolated liquid storage tanks", Shock Vib., 11(1), 33-45. https://doi.org/10.1155/2004/276030
  11. Jadhav, M.B. and Jangid, R.S. (2006), "Response of base-isolated liquid storage tanks to near-fault motions", Struct. Eng. Mech., 23(6), 615-634. http://doi.org/10.1089/sem.2006.23.6.615.
  12. Lee, Y.S., Yang, M.S., Kim, H.S. and Kim, J.H. (2002), "A study on the free vibration of the joined cylindrical-spherical shell structures", Comput. Struct., 80(27/30), 2405-2414. https://doi.org/10.1016/S0045-7949(02)00243-2.
  13. Liu, H.Q., Wang, X.Q. and Liu, J. (2008), "The shaking table test of an SMA strands composite bearing", J. Earth. Eng. Eng. Vib., 03, 152-156.
  14. Miao, X.Y., Wang, D.L., Tang, X. and Weng, G.Y. (2012), "Mechanical property and applied study of sma-rubber bearing for bridge structures", J. Xi'an Uni. Arch. Tech. (Nat. Sci. Ed.), 44(1), 28-32.
  15. Nayak, S.K. and Biswal, K.C. (2013), "Quantification of nonlinear seismic response of rectangular liquid tank", Struct. Eng. Mech., 47(5), 599-622. http://doi.org/10.12989/sem.2013.47.5.599.
  16. Ozbulut, O.E. and Hurlebaus, S. (2010), "Seismic assessment of bridge structures isolated by a shape memory alloy/rubber-based isolation system", Smart Mater. Struct., 20(1), 015003. https://doi.org/10.1088/0964-1726/20/1/015003.
  17. Panchal, V.R. and Jangid, R.S. (2012), "Behaviour of liquid storage tanks with VCFPS under near-fault ground motions", Struct. Infrastr. Eng., 8(1), 71-88. https://doi.org/10.1080/15732470903300919.
  18. Qi, L., Cheng, X., Zhou, X. and Zhang, S. (2020), "Dynamic response of high liquid level plate-shell integrated concrete liquid storage structure under long-period ground motion", Jordan J. Civil Eng., 14(4), 562-572.
  19. Qi, L., Cheng, X., Zhu, Q. and Zhang, S. (2021), "Seismic characteristic analysis of isolated plate-shell integrated concrete LSS", Eur. J. Environ. Civil Eng., 1-19. https://doi.org/10.1080/19648189.2021.1955748.
  20. Radnic, J., Grgic, N., Kusic, M.S. and Harapin, A. (2018), "Shake table testing of an open rectangular water tank with water sloshing", J. Fluid. Struct., 81, 97-115. https://doi.org/10.1016/j.jfluidstructs. 2018.04.020.
  21. Rahman, B.A. and Alam, M.S. (2013), "Seismic performance assessment of highway bridges equipped with superelastic shape memory alloy-based laminated rubber isolation bearing", Eng. Struct., 49(4), 396-407. https://doi.org/10.1016/j.engstruct.2012.11.022.
  22. Sarkheil, S. and Foumani, S.M. (2016), "Free vibrational characteristics of rotating joined cylindrical-conical shells", Thin Wall. Struct., 107, 657-670. https://doi.org/10.1016/j.tws.2016.07.009.
  23. Sun, J.G., Wang, X.N. and Zhao, C.J. (2010), "Theoretical study on seismic isolation of storage tanks", J. Harbin Ins. Tech., 04, 639-643. https://doi.org/10.11918/j.issn.0367-6234.2010.04.028.
  24. Tedesco, J.W. (1982), "Vibrational characteristics and seismic analysis of cylindrical liquid storage tanks", Doctoral Dissertation, Lehigh University, Bethlehem.
  25. Wang, H.B., Li, C.L. and Zhu, C. (2020), "Experimental study of dynamic interaction between large thin wall aqueduct and water", J. Hydra. Eng., 6, 653-663.
  26. Xue, S.D., Zhuang, P. and Li, B.S. (2005), "Experimental study on mechanical behavior of SMA-rubber bearing", World Earth. Eng., 21(4), 10-15. https://doi.org/10.3969/j.issn.1007-6069.2005.04.002
  27. Zhang, L., Chen, Z., Habibi, M., Ghabussi, A. and Alyousef, R. (2021), "Low-velocity impact, resonance, and frequency responses of FG-GPLRC viscoelastic doubly curved panel", Compos. Struct., 269, 114000. https://doi.org/10.1016/j.compstruct.2021.114000.
  28. Zheng, W., Wang, H., Li, J. and Shen, H. (2020), "Parametric study of superelastic-sliding LRB system for seismic response control of continuous bridges", J. Bridge Eng., 25(9), 04020062. https://doi.org/10.1061/(ASCE)BE.1943-5592.0001596.
  29. Zhou, Y. and Lu, X.L. (2016), Method and Technology for Shaking Table Model Test of Building Structures, Science Press, Beijing, China.