해양환경안전학회지 (Journal of the Korean Society of Marine Environment & Safety)

  • 제28권1호
  • /
  • Pages.135-140
  • /
  • 2022
  • /
  • 1229-3431(pISSN)
  • /
  • 2287-3341(eISSN)
해양환경안전학회 (The Korean Society of Marine Environment and safety)
권호 표지
DOI QR코드

DOI QR Code

가변피치 프로펠러의 축기전력 특성에 관한 연구 - 세계로호를 중심으로 -

A Study on the Characteristics of Shaft Electric Motive Force of Controllable Pitch Propeller - Focusing on the M/V Segero -

  • 박경민 (목포해양대학교 해양경찰학부) ;
  • 임명환 (목포해양대학교 승선실습과정부) ;
  • 최상범 (목포해양대학교 승선실습과정부) ;
  • 안병원 (목포해양대학교 기관시스템공학부)
  • Park, Kyung-Min (Division of Coast guard, Mokpo National Maritime University) ;
  • Im, Myeong-Hwan (Division of Cadet Training, Mokpo National Maritime University) ;
  • Choe, Sang-Bom (Division of Cadet Training, Mokpo National Maritime University) ;
  • Ahn, Byong-Won (Division of Marine Engineering, Mokpo National Maritime University)
  • 투고 : 2021.11.08
  • 심사 : 2022.02.25
  • 발행 : 2022.02.28
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

대부분의 기계는 여러 종류의 금속으로 구성된다. 특히 선박의 축계는 프로펠러 날개의 황동과 스테인리스로 된 축으로 이루어져 있다. 이 이종금속이 바닷물의 전해액에 들어가면 볼타 전지를 이루고, 기전력이 발생된다. 이 기전력은 축계를 받치고 있는 베어링과 축을 전기부식 시키는 원인이 된다. 선박에서는 이 부식을 막기 위해 선박에서는 축 접지 시스템을 설치하여 운용하고 있다. 본 연구는 가변피치 프로펠러의 축기전력을 측정하기 위하여 추진축의 전압과 주기관의 회전수를 동시에 측정하였다. 측정장치는 내셔널인스트루먼트사의 24bit A/D컨버터를 사용하여 측정하였고, 프로그램은 LabVIEW를 사용하였다. 주기관의 회전수와 축기전력의 발생, 블레이드 각도에 따른 기전력과, 배의 항해 방향에 따른 축기전력을 측정하고 분석하였다.

Most machines are made of several types of . In particular, the shaft system of the ship consists of the brass of the propeller blade and the stainless steel of the shaft. When dissimilar the electrolyte solution of seawater, a voltaic cell and a shaft electromotive force is generated. This electromotive force causes electrical corrosion of the bearing and shaft supporting the shaft system. prevent this corrosion, a shaft grounding system is installed in ships. As for the experimental method, various information acquired by designing a program to periodically measure the electromotive force of the controllable pitchpropeller) system using an A/D converter of NI. This study analyzed the generation and characteristics of accumulator electromotive force for CPP and considered the installation location of the grounding system to remove the accumulator electromotive force.

키워드

참고문헌

  1. Jo, K. H., Y. K. Kim, J. R. Kim, and H. J. Jeon(2020), Marine Propulsion System, p. 9.
  2. Lee, J. U., Y. W. Kim, and J. R. Kim(2018), A Study on Designing an Effective Support Point for After-Stern TubeBearings Concerning Shaft Alignment, Journal of the Korean Society of marine Environment and Safety, Vol. 24, No. 6, pp. 803-809. https://doi.org/10.7837/kosomes.2018.24.6.803
  3. Baik, S. Y(2007), A Study of Built-Up Repair Welding for Stainless Steel Propulsion Shafting, Journal of the Korean Society of marine Environment and Safety, Vol. 13, No. 4, pp. 119-125.
  4. Jo, K. H., Y. K. Kim, J. R. Kim, and H. J. Jeon(2020), Marine Propulsion System, pp. 270-271.
  5. Oh, J. S. and J. Y. Lee(2004), A Study on the ICCP Control and Monitoring system for Ship, Journal of the Korean Society of Marine Engineers, Vol. 28, No. 4, pp. 667-674
  6. Kim, K. H(2010), A Study on the Comparison of Performance Test methods for Cathodic Protection Sacrificial Anode in Natural Seawater, pp. 21-29.
  7. Oh, J. S(2004), Performance of Cathodic Protection with ICCP, Journal of the Korean Society of Marine Engineers, Vol. 28, No. 8, pp. 1286-1290.
  8. Chen, S. and T. A. Lipo(1998), Bearing Currents and Shaft Voltages ofan Induction Motor Under Hard and Soft Switching Inverter Excitation, IEEE Transactions on Industry Application, Vol. 34, No. 5, pp. 1042-1048. https://doi.org/10.1109/28.720444
  9. Plazenet, T., T. Boileau, C. Caironi, and B. N. Mobarakeh (2018), A Comprehensive Study on Shaft Voltages and Bearing Currents in Rotating Machines, IEEE Transactions on Industry Application, Vol. 54, No. 4, pp. 3749-3759. https://doi.org/10.1109/tia.2018.2818663
  10. Im, I. H(2010), Cause, countermeasure, and measurement methods of Shaft voltage, News of Korea Communications Agency, Vol. 73, pp. 8-14.
  11. Oh, M. K(2014), A Study on Characteristic Investigation and Analysis of Shaft Electromotive Force, Master's thesis, Mokpo Maritime University.
  12. Ahn, B. W and M. W. Im(2015), A Study on Characteristic Analysis of Shaft Electromotive Force in SAEYUDAL, Journal of the Korean Society of Marine Engineering, Vol. 39, No. 1, pp. 28-31. https://doi.org/10.5916/jkosme.2015.39.1.28
  13. Kim, S.(2016), A Study on the Analysis for Occurrence Mechanism of Shaft Electromotive Force on the Ship, Master's thesis, Mokpo Maritime University.
  14. Kim, J. N., H. Kwun, N. J. Park, S. Y. Song, and S. T. Choi(2013), Research on Whirling Vibration Characteristics of Propulsion Shaft of Ship with CPP, Proceedings of the Korean Society for Noise and Vibration Engineering, pp. 879-881.