DOI QR코드

DOI QR Code

생물막 반응기내 quorum quenching을 이용한 운전방식에 따른 흡입 압력의 영향

Effect of Suction Pressures with Respect to the Operational Modes Using the Quorum Quenching in the Membrane Bioreactor

  • 김민형 (서울과학기술대학교 화공생명공학과) ;
  • 구응모 (서울과학기술대학교 융합과학대학원 에너지화학공학과) ;
  • 김혁 (서울과학기술대학교 환경공학과) ;
  • 오현석 (서울과학기술대학교 환경공학과) ;
  • 정건용 (서울과학기술대학교 화공생명공학과)
  • Min Hyeong, Kim (Department of Chemical and Biomolecular Engineering, Seoul National University of Science and Technology) ;
  • Eeung Mo, Koo (Department of Energy and Chemical Engineering, Seoul National University of Science and Technology) ;
  • Hyeok, Kim (Department of Environmental Engineering, Seoul National University of Science and Technology) ;
  • Hyun-Suk, Oh (Department of Environmental Engineering, Seoul National University of Science and Technology) ;
  • Kun Yong, Chung (Department of Chemical and Biomolecular Engineering, Seoul National University of Science and Technology)
  • 투고 : 2022.10.21
  • 심사 : 2022.11.01
  • 발행 : 2022.12.31

초록

역세척이 가능한 평막형 분리막 모듈을 분리막 생물반응기(MBR)에 침지시켜 운전 시간에 따른 흡입 압력을 측정하였다. MLSS 8,000 mg/L 활성 슬러지 수용액에 공칭 세공크기가 0.2 ㎛, 유효막면적이 128 cm2 인 분리막 모듈을 침지시킨 후 투과 유속, quorum qeunching (QQ) 비드를 변화하며 흡입 압력을 확인하였다. Vacant bead (VB), BH4와 DKY-1의 실험군에서 FR과 SFCO 운전방식에 따른 효과를 비교, 분석하였다. 투과 유속 40 L/m2 ⋅h 이고 DKY-1 QQ 비드를 주입할 경우 흡입 압력 감소는 가장 효과적이었다. 또한 역세척에 의한 흡입 압력 감소 효과는 DKY-1 QQ 비드의 경우보다 2배 이상 높게 나타났다.

The suction pressure was measured with respect to operational time by the backwashable flat sheet membrane module in membrane bioreactor (MBR). The membrane module having the nominal pore size of 0.2 ㎛ and the effective membrane area of 128cm2 was submerged in MLSS 8,000 mg/L active sludge aqueous solution. The suction pressure was observed with respect to permeation flux and the quorum quenching (QQ) treatment. The effects of FR and SFCO operation methods were compared and analyzed in the experimental groups: vacant bead (VB), BH4 and DKY-1 beads. The suction pressure reduction was the most effective for the permeation flux 40 L/m2 ⋅h with the injection of DKY-1 QQ beads. Also, the suction pressure reduction by the backwashing method was more than twice for using DKY-1 QQ beads.

키워드

참고문헌

  1. J. A. Gil, L. Tua, A. Rueda, B. Montano, M. Rodriguez, and D. Prats, "Monitoring and analysis of the energy cost of an MBR", Desalination, 250, 997 (2010).
  2. T. Poerio, E. Piacentini, and R. Mazzei, "Membrane processes for microplastic removal", Molecules, 24, 4148 (2019).
  3. A. R. P. Pizzichetti, C. Pablos, C. Alvarez-Fern, K. Reynolds, S. Stanley, and J. Marugan, "Evaluation of membranes performance for microplastic removal in a simple and low-cost filtration system", Case Stud. Chem. Environ. Eng., 3, 100075 (2021).
  4. I. H. Cho and J. T. Kim, "Trends in the technology and market of membrane bioreactors(MBR) for wastewater treatment and reuse and development directions", Membr. J., 23, 24 (2013).
  5. H. S. Oh and C. H. Lee, "Origin and evolution of quorum quenching technology for biofouling control in MBRs for wastewater treatment", J. Membr. Sci., 554, 331 (2018).
  6. C. Psoch and S. Schiewer, "Anti-fouling application of air sparging and backflushing for MBR", J. Membr. Sci., 283, 273 (2006).
  7. R. Ahmad, J. K. Kim, J. H. Kim, and J. H. Kim, "In-situ TiO2 formation and performance on ceramic membranes in photocatalytic membrane reactor", Membr. J., 27, 328 (2017).
  8. Y. G. Choi, H. C. Kim, and S. H. Noh, "Effects of Fouling Reduction by Intermittent Aeration in Membrane Bioreactors", Membr. J., 25, 276 (2015).
  9. K. Y. Kim, J. H. Kim, Y. H. Kim, and H. S. Kim, "The effect of coagulant on filtration performance in submerged MBR system", Membr. J., 16, 182 (2006).
  10. M. Gutierrez, A. Ghirardini, M. Borghesi, S. Bonnini, D. M. Pavlovic, and P. Verlicchi, "Removal of micropollutants using a membrane bioreactor coupled with powdered activated carbon-A statistical analysis approach", Sci. Total Environ., 840, 156557 (2022).
  11. D. J. Kovacs, Z. Li, B. W. Baetz, Y. S. Hong, S. Donnaz, X. Zhao, P. Zhou, H. Ding, and Q. Dong, "Membrane fouling prediction and uncertainty analysis using machine learning: A wastewater treatment plant case study", J. Membr. Sci., 660, 120817 (2022).
  12. H. S. Oh, K. M. Yeon, C. S Yang, S. R Kim, C. H Lee, S. Y. Park, J. Y. Han, and J. K. Lee, "Control of membrane biofouling in MBR for wastewater treatment by quorum quenching bacteria encapsulated in microporous membrane", Evniron, Sci. Technol., 46, 4877 (2022).
  13. A. Syafiuddin, R. Boopathy, and M. A. Mehmood, "Recent advances on bacterial quorum quenching as an effective strategy to control biofouling in membrane bioreactors", Bioresour. Technol., 15, 100745 (2021).
  14. I. H. Won, H. W. Lee, H. J. Gwak, and K. Y. Chung, "Transmembrane pressure of flat-sheet membrane in emulsion type cutting oil solution for symmetric/asymmetric sinusoidal flux continuous operation mode", Membr. J., 25, 320 (2015) https://doi.org/10.14579/MEMBRANE_JOURNAL.2015.25.4.320
  15. E. Y. Chung, "Nano-fiber for Filter media, Filter media comprising the same, method for manufacturing thereof and Filer unit comprising the same", Korean Patent 10-2017-0020291, February 22 (2017).
  16. K. B. Lee, Y. W. Kim, S. K. Lee, S. H. Lee, C. H. Nahm, H. P. Kwon, P. K. Park, K. H. Choo, I. Koyuncu, A. Drews, C. H. Lee, and J. K. Lee, "Stopping autoinducer-2 chatter by means of an indigenous bacterium (Acinetobacter sp. DKY-1): A new antibiofouling strategy in a membrane bioreactor for wastewater treatment", Environ. Sci. Technol., 52, 6237 (2018). https://doi.org/10.1021/acs.est.7b05824
  17. S. K. Lee, H. Xu, S. A. Rice, T. H. Chong, and H. S. Oh, "Development of a quorum quenchingcolumn to control biofouling in reverse osmosis water treatment processes", J. Ind. Eng. Chem., 94, 188 (2021). https://doi.org/10.1016/j.jiec.2020.10.037
  18. S. R. Kim, H. S. Oh, S. J. Jo, K. M. Yeon, C. H. Lee, D. J. Lim, C. H. Lee, and J. K. Lee, "Biofouling control with bead-entrapped quorum quenching bacteria in membrane bioreactors: Physical and biological effects", Environ. Sci. Technol., 47, 836 (2013). https://doi.org/10.1021/es303995s