DOI QR코드

DOI QR Code

Investigation on the failure type of tower segments under equivalent static wind loads

  • Li, Yue (College of Civil Engineering, Tongji University) ;
  • Xie, Qiang (College of Civil Engineering, Tongji University) ;
  • Yang, Zheng (College of Civil Engineering, Tongji University)
  • Received : 2021.01.29
  • Accepted : 2021.11.14
  • Published : 2022.02.25

Abstract

This paper presents a failure type assessment curve method to judge the failure type of transmission tower segments. This novel method considers the equivalent static wind load characteristics and the transmission tower members' load-bearing capacities based on numerical simulations. This method can help judge the failure types according to the relative positions between the actual state points and the assessment curves of transmission tower segments. If the extended line of the actual state point intersects with the horizontal part's assessment curve, the segment would lose load-bearing capacity due to the diagonal members' failure. Another scenario occurs when the intersection point is in the oblique part, indicating that the broken main members have caused the tower segment to fail. The proposed method is verified by practical engineering case studies and static tests on the scaled tower segments.

Keywords

References

  1. Abdelrahman, A.H.A., Liu, Y.P. and Chan, S.L. (2020), "Advanced joint slip model for single-angle bolted connections considering various effects", Adv. Struct. Eng., 23(10), 2121-2135. https://doi.org/10.1177/1369433220906226.
  2. Albermani, F., Mahendran, M. and Kitipornchai, S. (2004), "Upgrading of transmission towers using a diaphragm bracing system", Eng. Struct., 26(May), 735-744. https://doi.org/10.1016/j.engstruct.2004.01.004.
  3. Albermani, F., Kitipornchai, S. and Chan, R.W.K. (2009), "Failure analysis of transmission towers", Eng. Fail. Anal., 16(SEP), 1922-1928. https://doi.org/10.1016/j.engfailanal.2008.10.001.04.096.
  4. American Society of Civil Engineers (2010), Minimum Design Loads for Buildings and Other Structures, American Society of Civil Engineers, Reston, Virginia. United States of America.
  5. Balagopal R., Ramaswamy A., Palani G.S. and Rao N.P. (2020), "Simplified bolted connection model for analysis of transmission line towers", Structures, 27(8), 2114-2125. https://doi.org/10.1016 /j.istruc.2020.08.029. https://doi.org/10.1016/j.istruc.2020.08.029
  6. Banik, S.S., Hong, H.P. and Kopp, G.A. (2010), "Assessment of capacity curves for transmission line towers under wind loading", Wind Struct., 13(1), 1-20. https://doi.org/10.12989/was.2010.13.1.001.
  7. Cai, Y.Z., Xie, Q. and Xue, S.T. (2019), "Fragility modelling framework for transmission line towers under winds", Eng. Struct., 191(JUL), 686-697. https://doi.org/10.1016/j.engstruct.2019. 04.096.
  8. Chen, S.F. (2011), "Stability capacity of tower cross-bracings taking account of interaction in buckling", China Civil Eng. J., 44 (1), 19-28. https://doi.org/10.15951/j.tmgcxb.2011.01.009.
  9. Darestani, Y.M., Shafieezadeh, A. and Cha, K. (2020), "Effect of modelling complexities on extreme wind hazard performance of steel lattice transmission towers", Struct. Infrastruct. Eng., 16(6), 898-915. https://doi.org/10.1080/15732479.2019.1673783.
  10. de Souza, R.R., Miguel, L.F.F., Kaminski, J. Lopez, R.H. and Torii, A.J. (2020), "Optimization of transmission towers considering the bolt slippage effect", Eng. Struct., 211(5), 1-13. https://doi.org/10.1016/j.engstruct.2020.110436.
  11. Earls, C.J. (2002), "On the notion of effective length for single angle geometric axis flexure", J. Construct. Steel Res., 58(9), 1195-1210. https://doi.org/10.1016/S0143-974X(01)00074-8.
  12. Edgar, T.H. and Sordo, E. (2017), "Structural behavior of lattice transmission towers subjected to wind load", Struct. Infrastruct. Eng., 13(11), 1462-1475. https://doi.org/10.1080/15732479.2017.1290120.
  13. Elawady, A., Aboshosha, H. and El Damatty, A. (2018), "Aero-elastic response of transmission line system subjected to downburst wind: Validation of numerical model using experimental data", Wind Struct., 27(2), 71-88. https://doi.org/10.12989/was.2018.27.2.071.
  14. Fu, X., Li, H.N., Li, G., Dong, Z.Q. and Zhao, M., Q. (2021), "Failure analysis of a transmission line considering the joint probability distribution of wind speed and rain intensity", Eng. Struct., 233(111913), 1-13. https://doi.org/10.1016/j.engstruct.2021.111913.
  15. Hamada, A. and El Damatty, A. (2016), "Behaviour of transmission line conductors under tornado wind", Wind Struct., 22(3), 369-391. https://doi.org/10.12989/was.2016.22.3.369.
  16. Hamada, A., King, J.P.C., El Damatty, A.A., Bitsuamlak, G. and Hamada, A. (2017), "The response of a guyed transmission line system to boundary layer wind", Eng. Struct., 139(1), 135-152. http://dx.doi.org/10.1016/j.engstruct.2017.01.047.
  17. Hamzah, N.H. and Usman, F. (2019), "Geospatial analysis of wind velocity to determine wind loading on transmission tower", Wind Struct., 28(6), 381-388. https://doi.org/10.12989/was.2019.28. 6.381.
  18. He, B., Zhao, M.X., Feng, W.T., Xiu, Y.P., Wang, Y., Feng, L.J., Qin, Y.J. and Wang, C.K. (2019), "A method for analyzing stability of tower-line system under strong winds", Adv. Eng. Softw., 127(JAN), 1-7. https://doi.org/10.1016/j.advengsoft.2018.10.004.
  19. Kim, W.B. (2020), "Strength and behavior according to leg frame shape variations of an electric transmission tower", Int. J. Steel Struct., 20(1), 355-363. https://doi.org/10.1007/s13296-019-00300-9.
  20. Li, J.X., McClure, G. and Wang, S.H. (2021), "Ensuring the structural safety of overhead transmission lines by design", J. Aeros. Eng., 34(3), 1-17. https://doi.org/10.1061/(ASCE) AS.1943-5525.0001245.
  21. Li, X., Zhang, W., Niu, H.W. and Wu, Z.Y. (2018), "Probabilistic capacity assessment of single circuit transmission tower-line system subjected to strong winds", Eng. Struct., 175(NOV), 517-530. https://doi.org/10.1016/ j.engstruct.2018.08.061.
  22. Ministry of Housing and Urban-Rural Development of the People's Republic of China (2017), National Standard of the People's Republic of China. GB50017-2017 Standard for Design of Steel Structures, China Architecture and Building Press, Beijing, China.
  23. Pourshargh F., Legeron F.P. and Langlois S. (2019), "Modeling the local buckling failure of angle sections with beam elements", Adv. Steel Constr., 15(4), 364-376, https://doi.org/10.18057/ IJASC.2019.15.4.7.
  24. Popovic, D., Hancock, G.J. and Rasmussen, K.J.R. (2013), "Compression tests on cold-formed angles loaded parallel with a leg", J. Struct. Eng., 127(6), 600-607. https://doi.org/10.1061/(ASCE) 0733-9445(2001)127:6(600).
  25. Xie, Q. and Sun, L. (2013), "Experimental study on the mechanical behavior and failure mechanism of a latticed steel transmission tower", J. Struct. Eng., 139(JUN), 1009-1018. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000722.
  26. Xie Q., Sun, Q.G., Guan, Z. and Zhou, Y. (2013), "Wind tunnel test on global drag coefficients of multi-bundled conductors", J. Wind Eng. Ind. Aerod., 120(1), 9-18. https://doi.org/10.1016/j.jweia.2013.06.005.
  27. Zhang, J. and Xie, Q. (2019), "Failure analysis of transmission tower subjected to strong wind load", J. Construct. Steel Res., 160(SEP), 271-279. https://doi.org/10.1016/j.jcsr.2019. 05.041.
  28. Zhang, Q. (2020), "Experimental study of wind loads on typical single-circuit transmission towers", Proc. Inst. Civ. Eng. Struct. Build., 173(3), 186-197, https://doi.org/10.1680/jstbu.17.00170.