한국지반공학회논문집 (Journal of the Korean Geotechnical Society)

  • 제38권2호
  • /
  • Pages.15-27
  • /
  • 2022
  • /
  • 1229-2427(pISSN)
  • /
  • 2288-646X(eISSN)
한국지반공학회 (Korean Geotechnical Society)
권호 표지
DOI QR코드

DOI QR Code

암반 그라우팅 주요 계획인자의 기준값에 관한 기초연구

A Fundamental Study on the Criteria of Basic Parameters for Planning Rock Grouting

  • 김종민 (세종대학교 건설환경공학과) ;
  • 이응기 ((주)제일엔지니어링 철도부)
  • 투고 : 2021.11.23
  • 심사 : 2022.02.08
  • 발행 : 2022.02.28
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

암반 그라우팅은 시설물 지반의 안정성을 향상시키는 보강 및 재해방지 대책으로서의 적용성이 날로 증가하고 있으나, 현장에서의 그라우팅은 대부분 경험에 의존하는 바 가이드라인으로 사용할 수 있는 주요 계획인자에 대한 최소 기준값이 필요한 실정이다. 본 연구에서는 암반 그라우팅 계획에 있어 중요한 인자인 주입조건(물-시멘트비, 주입압, 단위 시멘트 주입량)과 그라우팅 효과(변형계수와 투수성)에 대한 기준값을 제시하였다. 제시된 기준값들은 국내외 수압파쇄시험 및 암반 투수시험 자료, 국내외 17개 현장의 그라우팅 시험시공 자료, 그리고 국내외 기준 및 연구를 분석한 결과이다. 또한 그라우팅 효과를 제고하기 위한 안정한 주입재의 조건에 부합하도록 국내의 높은 물-시멘트비는 조정되어야 하며, 조정된 물-시멘트비 적용에 따른 기준값 조정방안도 살펴보았다. 본 연구의 결과 역시 경험의존적인 측면이 있지만, 현재 기준 보다 합리적인 그라우팅 계획의 기준을 제시를 위한 향후 세부연구의 기초자료로 활용할 수 있을 것이다.

Despite the increasing applicability of rock grouting as a method for strengthening or disaster prevention by improving the stability of ground, criteria for planning parameters which can be used as minimum guideline are required since the current practice is mainly dependent on experience. In this study, the fundamental criteria for important parameters of rock grouting in terms of injection conditions such as water-cement ratio, injecting pressure, cement take and resulting effects such as deformation modulus and permeability are proposed. Those criteria are the results of analyses of a series of hydraulic fracturing tests and Lugeon tests, in-situ grouting tests at 17 sites in Korea and other countries, combined with the literature analyses of standards and previous research. In addition, the method for modifying proposed criteria according to water-cement ratio is also addressed since that in Korean practice is too high and therefore, should be adjusted to satisfy the conditions of balanced stable grouting. The results of this study can be used as a fundamental reference for more refined research in the future although they are still somewhat experience-dependent.

키워드

과제정보

본 논문에 사용된 시공사례 및 시험시공 자료를 제공 해주신 (주)한국지오텍 관계자분들에게 감사드립니다.

참고문헌

  1. Barton, N., Buen, B., and Roald, S. (2002), Strengthening the Case for Grouting, Tunnels and Tunnelling International, Vol.34, No.1, pp.37-39.
  2. Bernander, S. (2004), Grouting in Sedimentary and Igneous Rock with Special Reference to Pressure Induced Deformations, Lulea University of Technology, Lulea, Sweden, pp.1-65.
  3. Eklund, D. (2005), Penetrability Due to Filtration Tendency of Cement Based Grout, Division of Soil and Rock Mechanics at Royal Institute of Technology, Stockholm.
  4. Eriksson, M., Stille, H., and Andersson, J. (2000), Numerical Calculation for Prediction of Grout Spread with Account for Filtration and Varying Aperture, Tunnelling and Underground Space Technology, Vol.15, No.4, pp.353-364. https://doi.org/10.1016/S0886-7798(01)00004-9
  5. Gothall, R. and Stille, H. (2010), Fracture-fracture Interaction during Grouting, Tunnelling and Underground Space Technology, Vol.25, pp.199-204. https://doi.org/10.1016/j.tust.2009.11.003
  6. HK Research (2012), Performance Casebook of Grouting Management Using AGS (Automatic Grouting System), Hankook Geotechnology Inc.
  7. Hollmen, K. (2008), R20 Programme: The Development of Grouting Technique-Stop Criteria and Field Tests, Working Report 2007-101, POVISA.
  8. Hong, W.P., Yun, J.M., Yeo, G.G., and Lee, H. (2002), The Cut-off Effect by Rock Grouting in the Area of Dam-foundation, Proceedings of Korea Society of Civil Engineers Conference, pp.2110-2113.
  9. Houlsby, A.C. (1992), Grouting in Rock Masses, Engineering in Rock Masses, pp.334-350.
  10. Hunt, R.E. (2007), Geotechnical Investigation Methods-A Field Guide for Geotechnical Engineers, CRC press.
  11. Janson, T. (1998), Calculation Models for Estimation of Grout Take in Hard Jointed Rock, Doctoral Thesis 1018, Royal Institute of Technology, Stockholm.
  12. Jeong, G.C. and Seo, Y.S. (2002), A Study on Improvement Effects on Fractured Rock Mass by Consolidation Grouting in Tunnel, The Journal of Engineering Geology, Vol.12, No.2, pp.189-202.
  13. Joo, H.W., Baek, S.H., Kwon, T.H., Han, J.T., Lee, J.H., and Yoo, W.K. (2020), Effect of Overburden Stress on Bulb Shapes of Horizontal Compaction Grout in Loose Sand: 2D-scaled Experimental Study, Journal of the Korean Geotechnical Society, Vol.36, No.12, pp.107-116. https://doi.org/10.7843/KGS.2020.36.12.107
  14. Jun, K.J., Oh, M., and Yune, C.Y. (2017), Laboratory Test for the Performance of Grouting under Hydrostatic Pressure, Journal of the Korean Geotechnical Society, Vol.33, No.10, pp.49-58. https://doi.org/10.7843/KGS.2017.33.10.49
  15. KEITI; Korea Environmental Industry & Technology Institute (2020), Development of a Prevention Technique for Ground Subsidence Induced by Sewage Pipeline and Test-bed Evaluation
  16. Khosravi, M.H., Pipatpongsa, T., Majdi, A., and Ohta, H. (2009), Critical Grouting Pressure Prediction in Tran Kheirabad Rock Mass based on Fracture Mechanics Approach, Proceedings of the 44th National Conference on Japan Geotechnical Engineering, Yokohama, pp.445-446.
  17. Kieffer, S., Dreese, T., Weil, J., and Kleberger, J. (2019), Tools for Optimizing Rock Mass Grouting, Geomechanics and Tunnelling, Vol.12, No.2, pp.121-128 https://doi.org/10.1002/geot.201800068
  18. Kim, T.H. and Lee, C.I. (2003), The Effect of Cement Milk Grouting on the Deformation behavior of Jointed Rock Mass, Tunnel & Underground Space, Vol.13, No.5, pp.331-343.
  19. KCSC; Korea Construction Standard Center (2018), KDS 54 50 00:2018 Concrete Gravity Dam.
  20. KCSC; Korea Construction Standard Center (2021), KDS 11 30 45:2021 Soft Ground Grouting.
  21. Koronakis, N., Kontothanassis, P., and Katsaris, D. (2005), Design of Water Isolation Grouting for Reducing High Water Inflows in urban shallow tunnels, Underground Space Use; Analysis of the Past and Lessons for the Future, pp.271-276.
  22. KRCC; Korea Rural Community Corporation (2001), A Practical Guide for the Design and Construction of Dam Grouting.
  23. Kuisi, M.A., Naga, A.E., and Shaqaour, F. (2005), Improvement of Dam Foundation Using Grouting Intensity Number (GIN) Technique at Tannur Dam site, South Jordan, Electrical Journal of Geotechnical Engineering, pp.1-16.
  24. Kutzner, C. (1996), Grouting of Rock and Soil.
  25. Lee, E.K. (2015), A Study on Improvement of Rock Grouting Design Guide, Ph. D. Dissertation, Sejong University, Seoul, Korea.
  26. Liu, Q., Lei, G., Peng, X., Lu, C., and Wei, L. (2018), Rheological Characteristics of Cement Grout and its Effect on Mechanical Properties of a Rock Fracture, Rock Mechanics and Rock Engineering, Vol.51, pp.613-625. https://doi.org/10.1007/s00603-017-1340-x
  27. Lombardi, G. and Deere, D. (1993), Grouting Design and Control Using the GIN Principle, International Water Power & Dam Construction, Vol.45, No.6, pp.15-22.
  28. Lombardi, G. (2002), Grouting of Rock Masses, 3rd International Conference on Grouting and Ground Treatment, Minusio, pp.164-197.
  29. Lunn, R.J., Corson, L.T., Howell, C., Mountassir, E., Reid, C., and Harley, S.L. (2018), Could Magnetic Properties be Used to Image a Grout Rock Volume?, Journal of Applied Physics, Vol.155, pp.162-175.
  30. MOLIT; Ministry Of Land, Infrastructure, and Transport (2011), Dam Design Standard.
  31. MOLIT; Ministry Of Land, Infrastructure, and Transport (2016), KCS 11 30 45:2016 Geotechnical Grouting.
  32. MOLIT; Ministry Of Land, Infrastructure, and Transport (2017), Special Specification for Railway Construction-Roadbed.
  33. Morgan, E.K. (2004) Parameters of the Norwegian Q-system and Geological Conditions Correlated with Grout Take in the JAi Skaugum Railroad Tunnel, Thesis in Engineering and Structural Geology, University of Oslo, Oslo.
  34. Moseley, M.P. and Kirsch, K. (2004), Ground Improvement, Spon Press.
  35. Naudts, A. (2004), Contemporary Issues in Rock Grouting and Formulation of Engineered Cement Based Suspension Grouts, ECO Grouting Specialists Inc.
  36. Olsson, J. (2008), Evaluation of Hard Rock Tunneling Data, Department of Earth Sciences Geology, University of Gothenburg, Gothenburg.
  37. Panthi, K.K. and Nilsen, B. (2005), Significance of Grouting for Controlling Leakage in Water Tunnels-a Case from Nepal, Underground Space Use; Analysis of the Past and Lessons for the Future, pp. 931-937.
  38. Park, D.H. (2010), Environmentally Friendly Characteristics and Durability of Inorganic Reinforcement Materials, Ph. D. Dissertation, nyang University, Seoul, Korea.
  39. Rafi, J.Y. (2013), Design Approaches for Grouting of Rock Fractures; Theory and Practice, Licentiate Thesis, Royal Institute of Technology, Stockholm.
  40. Roald, S., Nomeland, I.T., and Hansen, T.S. (2002), Multigrout-a Cement Based Injection System, Norwegian Tunneling Society.
  41. SMG; Seoul Metropolitan Government (1996), Manual for Ground Reinforcement-Focusing on Injection method, pp.17-38.
  42. Stille, H., Gustafson, G., and Hassler, L. (2012), Application of New Theories and Technology for Grouting of Dams and Foundations on Rock, Geotechnical and Geological Engineering, Vol.30, No.3, pp.603-624. https://doi.org/10.1007/s10706-012-9512-7
  43. US Army Corps of Engineers (2017), EM 1110-2-3506: Engineering and Design-Grouting Technology, Washington D.C.
  44. Utsuki, S. (2013), In-situ Experimental Studies on Improvement of Deformability of Rock Masses by Grouting Treatment, International Journal of the JCRM, Vol.9, No.1, pp.7-8.
  45. Warner, J. (2004), Practical Handbook of Grouting-Soil, Rock, and Structures, John Wiley & Sons.
  46. Weaver, K.D. (2000), A critical look at use of 'rules of thumb' for selection of grout injection pressures, Geo-Denver 2000, pp. 173-180.
  47. Weaver, K.D. and Bruce, D.A. (2007), Dam Foundation Grouting-Revised and Expanded, ASCE.
  48. Wiedmann, R. (1996), International Society for Rock Mechanics Commission on Rock Grouting, International Journal of Rock Mechanics, Mining Sciences, and Geomechanics, Vol.33, No.8, pp.803-847. https://doi.org/10.1016/S0148-9062(96)00015-0
  49. Wikimedia Commons (2013), URL: https://commons.wikimedia.org/wiki/File:Bingham_rheological_model.svg
  50. Yang, C.P. (2004), Estimating Cement Take and Grout Efficiency on Foundation Improvement for Li-Yu-Tan Dam, Engineering Geology, Vol.75, No.1, pp.1-14. https://doi.org/10.1016/j.enggeo.2004.04.005
  51. Yang, H.S. and Kim, J.G. (2007), Trends of Research in Fracture Toughness of Rocks, Tunnel & Underground Space, Vol.17, No.6, pp.448-452.
  52. You, K.H., Jie, H.K., Seo, K.W., Kim, S.J., and You, D.W. (2012), A Study on the Correlation between the Rock Mass Permeability before and After Grouting & Injection Volume and the Parameters of Q System in a Jointed Rock Mass Tunnel, Journal of Korean Tunnelling Association, Vol.14, No.6, pp.617-635.
  53. Xiao, F., Liu, Q., and Zhao, Z. (2021), Information and Knowledge Behind Data from Underground Rock Grouting, Journal of Rock Mechanics and Geotechnical Engineering, Vol.13, pp.1326-1339. https://doi.org/10.1016/j.jrmge.2021.06.013
  54. Zou, L., Hakansson, U., and Cvetkovic, V. (2019), Cement Grout Propagation in Two-dimensional Fracture Networks: Impact of Structure and Hydraulic Variability, International Journal of Rock Mechanics and Mining Sciences, Vol.115, pp.1-10. https://doi.org/10.1016/j.ijrmms.2019.01.004