과제정보
This research was supported by the National Research Foundation of Korea (NRF) funded by the Ministry of Science and ICT (NRF-2021R1|1A3059728). This research was also supported by Basic Science Research Program through the National Research Foundation of Korea (NRF) funded by the Ministry of Education (No.2018R1A6A1A03026005) and by the Technology Innovation Program (No. 20015759) funded by the Ministry of Trade, Industry & Energy (MOTIE, Korea). This results was supported by "Regional Innovation Strategy (RIS)" through the National Research Foundation of Korea (NRF) funded by the Ministry of Education (MOE) (2021RIS-004).
참고문헌
- J. Zheng, M. H. Engelhard, D. Mei, S. Jiao, B. J. Polzin, J.-G. Zhang, and W. Xu, Electrolyte additive enabled fast charging and stable cycling lithium metal batteries, Nat. Energy, 2(3), 1-8, (2017).
- J. Liu, Z. Bao, Y. Cui, E. J. Dufek, J. B. Goodenough, P. Khalifah, Q. Li, B. Y. Liaw, P. Liu, and A. Manthiram, Pathways for practical high-energy long-cycling lithium metal batteries, Nat. Energy, 4(3), 180-186, (2019). https://doi.org/10.1038/s41560-019-0338-x
- R. Xu, X.-B. Cheng, C. Yan, X.-Q. Zhang, Y. Xiao, C.-Z. Zhao, J.-Q. Huang, and Q. Zhang, Artificial interphases for highly stable lithium metal anode, Matter, 1(2), 317-344, (2019). https://doi.org/10.1016/j.matt.2019.05.016
- M. H. Braga, N. S. Grundish, A. J. Murchison, and J. B. Goodenough, Alternative strategy for a safe rechargeable battery, Energy Environm. Sci., 10(1), 331-336, (2017). https://doi.org/10.1039/c6ee02888h
- D. Jin, Y. Roh, T. Jo, M. H. Ryou, H. Lee, and Y. M. Lee, Robust cycling of ultrathin Li metal enabled by nitrate?preplanted Li powder composite, Adv. Energy Mater., 11(18), 2003769, (2021). https://doi.org/10.1002/aenm.202003769
- S.-J. Cho, D.-E. Yu, T. P. Pollard, H. Moon, M. Jang, O. Borodin, and S.-Y. Lee, Nonflammable lithium metal full cells with ultra-high energy density based on coordinated carbonate electrolytes, iScience, 23(2), 100844, (2020). https://doi.org/10.1016/j.isci.2020.100844
- R. E. Garcia, and Y.-M. Chiang, Spatially resolved modeling of microstructurally complex battery architectures, J. Electrochem. Soc., 154(9), A856, (2007). https://doi.org/10.1149/1.2754072
- V. Ramadesigan, P. W. Northrop, S. De, S. Santhanagopalan, R. D. Braatz, and V. R. Subramanian, Modeling and simulation of lithium-ion batteries from a systems engineering perspective, J. Electrochem. Soc., 159(3), R31, (2012). https://doi.org/10.1149/2.018203jes
- Y. Sheng, C. R. Fell, Y. K. Son, B. M. Metz, J. Jiang, and B. C. Church, Effect of calendering on electrode wettability in lithium-ion batteries, Front. Energy Res., 2, 56, (2014).
- M. Singh, J. Kaiser, and H. Hahn, Thick electrodes for high energy lithium ion batteries, J. Electrochem. Soc., 162(7), A1196, (2015). https://doi.org/10.1149/2.0401507jes
- M. Singh, J. Kaiser, and H. Hahn, A systematic study of thick electrodes for high energy lithium ion batteries, J. Electroanal. Chem., 782, 245-249, (2016). https://doi.org/10.1016/j.jelechem.2016.10.040
- Y. Kuang, C. Chen, D. Kirsch, and L. Hu, Thick electrode batteries: principles, opportunities, and challenges, Adv. Energy Mater., 9(33), 1901457, (2019). https://doi.org/10.1002/aenm.201901457
- M. Baunach, S. Jaiser, S. Schmelzle, H. Nirschl, P. Scharfer, and W. Schabel, Delamination behavior of lithium-ion battery anodes: Influence of drying temperature during electrode processing, Dry. Technol., 34(4), 462-473, (2016). https://doi.org/10.1080/07373937.2015.1060497
- S. Jaiser, L. Funk, M. Baunach, P. Scharfer, and W. Schabel, Experimental investigation into battery electrode surfaces: The distribution of liquid at the surface and the emptying of pores during drying, J. Colloid Interf. Sci., 494, 22-31, (2017). https://doi.org/10.1016/j.jcis.2017.01.063
- F. Huttner, W. Haselrieder, and A. Kwade, The influence of different post?drying procedures on remaining water content and physical and electrochemical properties of lithium?ion batteries, Energy Technol., 8(2), 1900245, (2020). https://doi.org/10.1002/ente.201900245
- J. Kumberg, W. Bauer, J. Schmatz, R. Diehm, M. Tonsmann, M. Muller, K. Ly, P. Scharfer, and W. Schabel, Reduced drying time of anodes for lithium?ion batteries through simultaneous multilayer coating, Energy Technol., 9(10), 2100367, (2021). https://doi.org/10.1002/ente.202100367
- M. Muller, L. Pfaffmann, S. Jaiser, M. Baunach, V. Trouillet, F. Scheiba, P. Scharfer, W. Schabel, and W. Bauer, Investigation of binder distribution in graphite anodes for lithium-ion batteries, J. Power Sources, 340, 1-5, (2017). https://doi.org/10.1016/j.jpowsour.2016.11.051
- B. G. Westphal, and A. Kwade, Critical electrode properties and drying conditions causing component segregation in graphitic anodes for lithium-ion batteries, J. Energy Storage, 18, 509-517, (2018). https://doi.org/10.1016/j.est.2018.06.009
- W. Wang, H. Qi, P. Liu, Y. Zhao, and H. Chang, Numerical simulation of densification of Cu-Al mixed metal powder during axial compaction, Metals, 8(7), 537, (2018). https://doi.org/10.3390/met8070537
- H. Staf, P. Lindskog, D. C. Andersson, and P.-L. Larsson, On the influence of material parameters in a complex material model for powder compaction, J. Mater. Eng. Perform., 25(10), 4408-4415, (2016). https://doi.org/10.1007/s11665-016-2294-y
- L.-C. Chen, D. Liu, T.-J. Liu, C. Tiu, C.-R. Yang, W.-B. Chu, and C.-C. Wan, Improvement of lithium-ion battery performance using a two-layered cathode by simultaneous slot-die coating, J. Energy Storage, 5, 156-162, (2016). https://doi.org/10.1016/j.est.2015.12.008
- D. Liu, L. C. Chen, T. J. Liu, W. B. Chu, and C. Tiu, Improvement of lithium?ion battery performance by two?layered slot-die coating operation, Energy Technol., 5(8), 1235-1241, (2017). https://doi.org/10.1002/ente.201600536
- S. T. Taleghani, B. Marcos, K. Zaghib, and G. Lantagne, The effect of structural properties of a two-layered electrode on the Li-ion battery polarization, J. Electrochem. Soc., 166(2), A225, (2019). https://doi.org/10.1149/2.0681902jes
- J. Ott, B. Volker, Y. Gan, R. M. McMeeking, and M. Kamlah, A micromechanical model for effective conductivity in granular electrode structures, Acta Mech. Sin., 29(5), 682-698, (2013). https://doi.org/10.1007/s10409-013-0070-x
- H. Bockholt, M. Indrikova, A. Netz, F. Golks, and A. Kwade, The interaction of consecutive process steps in the manufacturing of lithium-ion battery electrodes with regard to structural and electrochemical properties, J. Power Sources, 325, 140-151, (2016). https://doi.org/10.1016/j.jpowsour.2016.05.127
- T. Yoon, S. Park, J. Mun, J. H. Ryu, W. Choi, Y.-S. Kang, J.-H. Park, and S. M. Oh, Failure mechanisms of LiNi0.5Mn1.5O4 electrode at elevated temperature, J. Power Sources, 215, 312-316, (2012). https://doi.org/10.1016/j.jpowsour.2012.04.103
- S. Choi, J. Kim, M. Eom, X. Meng, and D. Shin, Application of a carbon nanotube (CNT) sheet as a current collector for all-solid-state lithium batteries, J. Power Sources, 299, 70-75, (2015). https://doi.org/10.1016/j.jpowsour.2015.08.081
- J.-H. Kim, S. C. Woo, M.-S. Park, K. J. Kim, T. Yim, J.-S. Kim, and Y.-J. Kim, Capacity fading mechanism of LiFePO4-based lithium secondary batteries for stationary energy storage, J. Power Sources, 229, 190-197, (2013). https://doi.org/10.1016/j.jpowsour.2012.12.024
- F. Durst, R. Haas, and W. Interthal, The nature of flows through porous media, J. Non-Newton. Fluid Mech., 22(2), 169-189, (1987). https://doi.org/10.1016/0377-0257(87)80034-4
- C. J. Bae, C. K. Erdonmez, J. W. Halloran, and Y. M. Chiang, Design of battery electrodes with dual?scale porosity to minimize tortuosity and maximize performance, Adv. Mater., 25(9), 1254-1258, (2013). https://doi.org/10.1002/adma.201204055
- B. Tran, I. O. Oladeji, Z. Wang, J. Calderon, G. Chai, D. Atherton, and L. Zhai, Adhesive PEG-based binder for aqueous fabrication of thick Li4Ti5O12 electrode, Electrochim. Acta, 88, 536-542, (2013). https://doi.org/10.1016/j.electacta.2012.10.139
- G. Liu, H. Zheng, S. Kim, Y. Deng, A. Minor, X. Song, and V. Battaglia, Effects of various conductive additive and polymeric binder contents on the performance of a lithium-ion composite cathode, J. Electrochem. Soc., 155(12), A887, (2008). https://doi.org/10.1149/1.2976031
- H. Zheng, L. Tan, G. Liu, X. Song, and V. S. Battaglia, Calendering effects on the physical and electrochemical properties of Li [Ni1/3Mn1/3Co1/3] O2 cathode, J. Power Sources, 208, 52-57, (2012). https://doi.org/10.1016/j.jpowsour.2012.02.001
- S. J. Babinec, H. Tang, G. Meyers, S. Hughes, and A. Talik, Composite cathode structure/property relationships, ECS Trans., 2(8), 93, (2007). https://doi.org/10.1149/1.2424292
- H. Dreger, W. Haselrieder, and A. Kwade, Influence of dispersing by extrusion and calendering on the performance of lithium-ion battery electrodes, J. Energy Storage, 21, 231-240, (2019). https://doi.org/10.1016/j.est.2018.11.028
- B. Vijayaraghavan, D. R. Ely, Y.-M. Chiang, R. Garcia-Garcia, and R. E. Garcia, An analytical method to determine tortuosity in rechargeable battery electrodes, J. Electrochem. Soc., 159(5), A548, (2012). https://doi.org/10.1149/2.jes113224
- G. Sikha, B. N. Popov, and R. E. White, Effect of porosity on the capacity fade of a lithium-ion battery: Theory, J. Electrochem. Soc., 151(7), A1104, (2004). https://doi.org/10.1149/1.1759972
- B. Son, M.-H. Ryou, J. Choi, S.-H. Kim, J. M. Ko, and Y. M. Lee, Effect of cathode/anode area ratio on electrochemical performance of lithium-ion batteries, J. Power Sources, 243, 641-647, (2013). https://doi.org/10.1016/j.jpowsour.2013.06.062