DOI QR코드

DOI QR Code

열교 영향을 반영한 트러스 단열 프레임 적용 외단열 시스템의 에너지 성능 및 경제성 평가

Energy Performance and Economic Feasibility Evaluation of Exterior Insulation and Finish System with Truss-shaped Insulation Frame Reflecting Thermal Bridging Effect

  • 최보혜 (이화여대 건축도시시스템공학과) ;
  • 송승영 (이화여대 건축도시시스템공학과)
  • Choi, Bo-Hye (Dept. of Architecture & Urban Systems Engineering, Ewha Womans University) ;
  • Song, Seung-Yeong (Dept. of Architecture & Urban Systems Engineering, Ewha Womans University)
  • 투고 : 2021.12.23
  • 심사 : 2022.02.15
  • 발행 : 2022.02.28

초록

This study aims is to compare the energy performance and economic feasibility of outer wall insulation systems using conventional rectangular pipe frames as the base case with double and single truss-shaped insulation frames intended to reduce the thermal bridging effect of alt 1 and alt 2. Annual heating and cooling energy use were estimated by performing a dynamic building energy simulation. The thermal bridging effect was modeled by applying the linear thermal transmittance obtained from the three-dimensional steady-state heat transfer simulation to the building energy simulation. The annual energy cost, construction cost, and life cycle cost for 30 years were estimated together. The results indicated that the annual energy use of alt 1 and alt 2 decreased by 12.5% and 13.9%, the annual energy cost decreased by 11.8% and 13.2%, the construction cost decreased by 1.4% and 6.8% and the life cycle cost of alt 1 and alt 2 decreased by 2.6% and 7.5% respectively.

키워드

과제정보

이 논문은 2021년도 정부(산업통상자원부)의 재원으로 한국에너지기술평가원의 지원을 받아 수행된 연구임(20202020800360, 기존 공공건물 에너지 효율 진단 및 리모델링 기술 개발 실증)

참고문헌

  1. Choi, B.H., & Song, S.Y. (2021). Insulation performance comparison of curtain wall systems with existing pipe frames and truss-shaped insulation frames. Energies 2021. 14(15), 4682.
  2. Choi, B.H. (2009). Energy Performance Evaluation of External Insulation and Finish System for Apartment Building, Thesis. Ewha Womans University.
  3. DesignBuilder. (2021). DesignBuilder simulation documentation for DesignBuilder v7.
  4. DIN V 18599-10. (2018). Energy efficiency of buildings - Calculation of the energy needs, delivered energy and primary energy for heating, cooling, ventilation, domestic hot water and lighting - Part 10: Boundary conditions of use, climatic data.
  5. ECOS. (2021). Economic Statistics System. Retrieved November 23, 2021 from http://ecos.bok.or.kr
  6. ISO 10211. (2017). Thermal bridges in buildings construction - Heat flows and surface temperatures - Detailed calculations.
  7. KEPCO. (2021). Cyber Kepco. Retrieved November 15, 2021 from https://cyber.kepco.co.kr/ckepco
  8. Ministry of Land, Infrastructure and Transport(MOLIT). (2018). Energy Saving Design Standards of Buildings.
  9. Ministry of Land, Infrastructure and Transport. (2021). Enforcement Decree of the Building Act, Notification No.31270.
  10. Ministry of Land, Infrastructure and Transport. (2019). Press release, Zero Energy Building, Beyond Buildings to Cities.
  11. Oh, J.M. (2017). Evaluation of Building Energy Performance for Metal Panel Curtain Wall Building by Considering Thermal Bridges according to U-value Level of Envelope, Thesis. Ewha Womans University.
  12. Physibel. (2017). TRISCO Manual. computer program to calculate 3D & 2D steady state heat transfer in rectangular objects. version 14.0w.
  13. Shin, D.I. (2017). Developement of thermal breaker for the dry envelope and applied case. Proceeding of Annual Conference of the Architectural Institute of Korea. 37(2), 1230-1234.
  14. Song, J.H., Lee, D.Y., Shin, D.I., Jun, H.D., Park, C.Y., & Kim, S.K.(2019). Evaluation of building envelope performance of a dry exterior insulation system using truss insulation frame. Journal of Architectural Institute of Korea Structure & Construction, 35(6), 153-164. https://doi.org/10.5659/JAIK_SC.2019.35.6.153