DOI QR코드

DOI QR Code

Fabrication of silk nanofibril-embedded regenerated silk fibroin composite fiber by wet spinning

  • Chang Hyun, Bae (Department of Biofibers and Biomaterials Science, Kyungpook National University) ;
  • In Chul, Um (Department of Biofibers and Biomaterials Science, Kyungpook National University)
  • Received : 2022.09.23
  • Accepted : 2022.10.19
  • Published : 2022.12.30

Abstract

Wet-spun regenerated silk fibroin (RSF) fibers have been extensively studied owing to their 1) useful properties as biomaterials, including good blood compatibility and cyto-compatibility; 2) the various methods available to control the structural characteristics and morphology of the fiber, and 3) the possibility of fabricating blended fibers and new material-embedded fibers. In this study, silk nanofibrils prepared using a new method were embedded in RSF to fabricate wet-spun silk nanofibril/RSF composite fibers. Up to 2% addition of silk nanofibril, the silk nanofibril/RSF dope solution showed slight shear thinning, and the G' and G" of the dope solution were similar. However, above 3% silk nanofibril content, the viscosity of the dope solution significantly increased. In addition, shear thinning was remarkably evident, and the G' of the dope solution was much higher than the G", indicating a very elastic state. As the silk nanofibril content was increased, the wet-spun silk nanofibril/RSF composite fiber became uneven, with a rough surface, and more beaded fibers were produced. Scanning electron microscopy observations revealed that the beaded fibers were attributed to the inhomogeneous dispersion and presence of agglomerates of the silk nanofibrils. As the silk nanofibril content and RSF concentration increased, the maximum draw ratio decreased, indicating the deterioration of the wet spinnability and post-drawing performance of silk nanofibril/RSF.

Keywords

Acknowledgement

This study was supported by the National Research Foundation of Korea grant funded by the Korean Government (Ministry of Science and ICT) (grant no. 2021R1A2C1006921).

References

  1. Bae YJ, Jang MJ, Um IC (2022) Silk/Rayon Webs and Nonwoven Fabrics: Fabrication, Structural Characteristics, and Properties. Int J Mol Sci 23, 7511.
  2. Bae YJ, Noh SK, Um IC (2021) Crystallinity change of silkworm variety cocoons by heat treatment. Int J Indust Entomol 42, 7-13. https://doi.org/10.7852/IJIE.2021.42.1.7
  3. Bae YJ, Um IC (2020) Effect of addition of methanol on rheological properties of silk formic acid solution. Int J Indust Entomol 40, 28-32. https://doi.org/10.7852/ijie.2020.40.1.28
  4. Cho HJ, Um IC (2010) The effect of dissolution condition on the yield, molecular weight, and wet- and electro-spinnability of regenerated silk fibroins prepared by LiBr aqueous solution. Int J Indust Entomol 20, 99-105.
  5. Cho HJ, Yoo HJ, Kim JW, Park YH, Bae DG, Um IC (2012) Effect of molecular weight and storage time on the wet- and electro-spinning of regenerated silk fibroin. Polym Degrad Stab 97, 1060-1066. https://doi.org/10.1016/j.polymdegradstab.2012.03.007
  6. Choi HJ, Noh SK, Um IC (2020) Morphology, molecular conformation and moisture regain of cocoons of different silkworm varieties. Int J Indust Entomol 40, 6-15.
  7. Chung DE, Um IC (2014) Effect of molecular weight and concentration on crystallinity and post drawing of wet spun silk fibroin fiber. Fiber Polym 15, 153-160.
  8. Huang J, Liu L, Yao JM (2011) Electrospinning of Bombyx mori silk fibroin nanofiber mats reinforced by cellulose nanowhiskers. Fiber Polym 12, 1002-1006.
  9. Jang MJ, Um IC (2017) Effect of sericin concentration and ethanol content on gelation behavior, rheological properties, and sponge characteristics of silk sericin. Eur Polym J 93, 761-774. https://doi.org/10.1016/j.eurpolymj.2017.03.048
  10. Ki CS, Kim JW, Oh HJ, Lee KH, Park YH (2007) The effect of residual silk sericin on the structure and mechanical property of regenerated silk filament. Int J Biol Macromol 41, 346-353. https://doi.org/10.1016/j.ijbiomac.2007.05.005
  11. Kim HJ, Um IC (2014) Effect of degumming ratio on wet spinning and post drawing performance of regenerated silk. Int J Biol Macromol 67, 387-393. https://doi.org/10.1016/j.ijbiomac.2014.03.055
  12. Kim YJ, Kweon HY, Um IC (2021) Effect of wet treatment condition on the character of silkworm cocoon. Int J Indust Entomol 43, 22-28. https://doi.org/10.7852/IJIE.2021.43.1.22
  13. Ko JS, Lee KH, Bae DG, Um IC (2010) Miscibility, structural characteristics, and thermal behavior of wet spun regenerated silk fibroin/nylon 6 blend filaments. Fiber Polym 11, 14-20. https://doi.org/10.1007/s12221-010-0014-z
  14. Ko JS, Um IC (2009) The effect of HPMC concentration on the morphology and post drawing of wet spun regenerated SF/HPMC blend filaments. Int J Indust Entomol 19, 181-185.
  15. Lee HG, Nho SK, Um IC (2021) Morphology and crystallinity of silkworm cocoons with different rearing seasons. Int J Indust Entomol 43, 16-21. https://doi.org/10.7852/IJIE.2021.43.1.16
  16. Lee JH, Bae CH, Park B, Um IC (2013) The preparation of cellulose nanofibril / regenerated silk fibroin composite fiber. Int J Indust Entomol 26, 81-88.
  17. Lee JH, Park BK, Um IC (2022) Preparation of highly crystalline silk nanofibrils and their use in the improvement of the mechanical properties of silk films. Int J Mol Sci 23, 11344. https://doi.org/10.3390/ijms231911344
  18. Lee KH, Baek DH, Ki CS, Park YH (2007) Preparation and characterization of wet spun silk fibroin/poly(vinyl alcohol) blend filaments. Int J Biol Macromol 41, 168-172. https://doi.org/10.1016/j.ijbiomac.2007.01.011
  19. Meinel L, Hofmann S, Karageorgiou V, Kirker-Head C, McCool J, Gronowicz G, et al. (2005) The inflammatory responses to silk films in vitro and in vivo. Biomaterials 26, 147-155. https://doi.org/10.1016/j.biomaterials.2004.02.047
  20. Minoura N, Aiba S, Gotoh Y, Tsukada M, Imai Y (1995) Attachment and growth of cultured fibroblast cells on silk protein matrixes. J Biomed Mater Res 29, 1215-1221. https://doi.org/10.1002/jbm.820291008
  21. Noishiki Y, Nishiyama Y, Wada M, Kuga S, Magoshi J (2002) Mechanical properties of silk fibroin-microcrystalline cellulose composite films. J Appl Polym Sci 86, 3425-3429. https://doi.org/10.1002/app.11370
  22. Park BK, Um IC (2021) Effect of Relative Humidity on the Electrospinning Performance of Regenerated Silk Solution. Polymer 13, 2479. https://doi.org/10.3390/polym13152479
  23. Sakabe H, Ito H, Miyamoto T, Noishiki, Ha WS (1989) In vivo blood compatibility of regenerated silk fibroin. Sen-i Gakkaishi 45, 487-490. https://doi.org/10.2115/fiber.45.11_487
  24. Um IC, Ki CS, Kweon H, Lee GK, Ihm DW, Park YH (2004b) Wet spinning of silk polymer II. Effect of drawing on the structural characteristics and properties of filament. Int J Biol Macromol 34, 107-119. https://doi.org/10.1016/j.ijbiomac.2004.03.011
  25. Um IC, Kweon H, Lee KG, Ihm DW, Lee J, Park YH (2004a) Wet spinning of silk polymer I. Effect of coagulation conditions on the morphological feature of filament. Int J Biol Macromol 34, 89-105. https://doi.org/10.1016/j.ijbiomac.2004.03.007
  26. Um IC, Kweon HY, Hwang CM, Min BG, Park YH (2002) Structural characteristics and properties of silk fibroin/polyurethane blend films. Int J Indust Entomol 5, 163-170.
  27. Yoo YJ, Kim UJ, Um IC (2010) The effect of coagulant and molecular weight on the wet spinnability of regenerated silk fibroin solution. Int J Indust Entomol 21, 145-150.