DOI QR코드

DOI QR Code

Introduction to Research Trend of Real-Time Measurement for Wear of TBM Disc Cutter

TBM 디스크커터의 마모량 실시간 계측을 위한 연구현황

  • Min-Sung, Park (Department of Energy Resources Engineering, Pukyong National University) ;
  • Min-Seok, Ju (Department of Energy Resources Engineering, Pukyong National University) ;
  • Min-Sung, Cho (Department of Energy Resources Engineering, Pukyong National University) ;
  • Jun, Lee (Department of Energy Resources Engineering, Pukyong National University) ;
  • Jung-Joo, Kim (Next Generation Transmission & Substation Laboratory, KEPCO Research Institute, KEPCO) ;
  • Hoyoung, Jeong (Department of Energy Resources Engineering, Pukyong National University)
  • 박민성 (부경대학교 에너지자원공학과 ) ;
  • 주민석 (부경대학교 에너지자원공학과 ) ;
  • 조민성 (부경대학교 에너지자원공학과 ) ;
  • 이준 (부경대학교 에너지자원공학과) ;
  • 김정주 (한국전력공사 전력연구원 차세대송변전연구소) ;
  • 정호영 (부경대학교 에너지자원공학과)
  • Received : 2022.12.13
  • Accepted : 2022.12.15
  • Published : 2022.12.31

Abstract

TBM disc cutter, which is the main cutting tool of tunnel boring machine (TBM), is replaced when it is excessively worn during the boring process. Disc cutters are usually monitored by workers at cutterhead chamber, and they check the status and wear amount of cutters. Because cutterhead chamber is usually in dangerous circumstance due to high pressure and instability of excavation surface, the measurement by manpower occasionally results in inaccuracy of measurement result. In order to overcome the limitations, the real-time disc cutter monitoring techniques have been developed in some foreign countries. This paper collected the current status of disc cutter monitoring system from the literature. Several types of sensors are used to measure the cutter wear, and it is believed that the collected information can be useful reference when similar domestic technologies are developed in the future.

TBM의 주요 절삭도구인 디스크커터는 과다하게 마모되거나 손상된 경우 적절한 시기에 교체되어야 한다. 일반적으로 커터의 교체여부를 판단하기 위해서 작업자가 커터헤드 챔버의 내부로 접근하여 디스크 커터의 상태와 마모량을 계측하고 있다. 하지만 커터헤드(cutterhead) 챔버(chamber) 내부는 작업자에게 열악한 조건일 경우가 많아 작업자의 안전과 관련한 이슈가 있으며, 인력에 의해서 계측이 이루어짐에 따라 계측치의 오차도 발생하는 것으로 보고되고 있다. 이러한 한계점을 극복하고자 현재 해외에서는 디스크커터의 마모정도를 계측센서를 통해 굴착 중에 실시간으로 측정하기 위한 기술의 개발이 활발하게 이루어지고 있으며, 본 연구에서는 현재까지 해외의 문헌을 통해 보고되고 있는 TBM 디스크커터의 마모량 계측에 관한 연구현황에 대하여 소개하고자 하였다. 여러 형식의 센서가 디스크커터의 마모계측을 위해 활용되고 있으며, 향후 국내에서도 유사한 기술의 개발이 이루어지는 경우에 유용한 참고자료가 될 수 있을 것으로 판단된다.

Keywords

Acknowledgement

본 연구는 한국전력공사 자체연구개발 과제(R22SA01) '전력구 공사 안전확보를 위한 디스크커터 마모측정 및 수명예측 기술 개발'의 지원으로 수행되었습니다. 연구지원에 감사드립니다.

References

  1. Bruland, A., 1998, Hard Rock Tunnel Boring: Advance Rate and Cutter Wear. Project report 1B-98, NTNU.
  2. Du, L., Yuan, J., Bao, S., Guan, R., and Wan, W., 2022, Robotic replacement for disc cutters in tunnel boring machines, Automation in Construction, 140, 104369.  https://doi.org/10.1016/j.autcon.2022.104369
  3. Edelmann, T., 2013, Monitoring of cutting tools in TBM's, In: 2013 Tunneling research in Leoben (Schwanau and Bochum Workshop). 
  4. Farrokh, E. and Kim, D.Y., 2018, A discussion on hard rock TBM cutter wear and cutterhead intervention interval length evaluation, Tunnelling and Underground Space Technology, 81, 336-357.  https://doi.org/10.1016/j.tust.2018.07.017
  5. Fu, J., Lan, H., Wu, D., and Lin, L., 2021, A case study on TBM cutterhead temperature monitoring and mud cake formation discrimination method, Scientific reports, 11, 11983.  https://doi.org/10.1038/s41598-021-91319-8
  6. Gehring, K. 1995, Progonis of advance rates and wear for underground mechanized excavation, Felsbau, 13(6), 439-448 
  7. Guo, J., Wang, Y., Liu, J., and Niu, J., 2013, The Research and Design of A New Shield Cutter Wear Detection System, Advanced Materials Research, 711, 381-384. 
  8. Gong, Q., Wu, F., Wang, D., Qiu, H., and Yin, L., 2021, Development and Application of Cutterhead Working Status Monitoring System for Shield TBM Tunnelling, Rock Mechanics and Rock Engineering, 54, 1731-1753.  https://doi.org/10.1007/s00603-021-02380-8
  9. Lan, H., Xia, Y., Ji, Z., Fu, J., and Miao, B., 2019, Online monitoring device of disc cutter wear - Design and field test, Tunnelling and Underground Space Technology, 89, 284-294.  https://doi.org/10.1016/j.tust.2019.04.010
  10. Spurek, M.A., Luong, V.H., Spierings, A.B., Lany, M., Santi, G., Revaz, B., and Wegener, K., 2021, Relative density measurement of PBF-Manfactured 316L and AlSi10Mg samples via eddy current testing, Metals, 11, 1376.  https://doi.org/10.3390/met11091376
  11. Wang, F., Men, C.H., Kong, X.W., and Meng, L.X., 2019, Optimum design and application research of eddy current sensor for measurement of TBM disc cutter wear, Sensors, 19, 4230.  https://doi.org/10.3390/s19194230
  12. Yuan, J., Guan, R., and Du, J., 2019, Design and implementation of disc cutter changing robot for tunnel boring machine (TBM), in: 2019 IEEE International Conference on Robotics and Biomimetics (ROBIO), IEEE, 2402-2407. 
  13. Zhmud, V.A., Kondratiev, N.O., Kuznetsov, K.A., Trubin, V.G., and Dimitrov, L.V., 2018, Application of ultrasonic sensor for measuring distances in robotics, IOP Conf. Series: Journal of Physics: Conf. Series, 1015(2018), 032189.  https://doi.org/10.1088/1742-6596/1015/3/032189