DOI QR코드

DOI QR Code

Numerical simulation of the flow in pipes with numerical models

  • Gao, Hongjie (Key Laboratory of Urban Underground Engineering of Ministry of Education, Beijing Jiaotong University) ;
  • Li, Xinyu (Key Laboratory of Urban Underground Engineering of Ministry of Education, Beijing Jiaotong University) ;
  • Nezhad, Abdolreza Hooshmandi (Department of Civil Engineering, Jasb Branch, Islamic Azad University) ;
  • Behshad, Amir (Faculty of Technology and Mining, Yasouj University)
  • 투고 : 2021.01.16
  • 심사 : 2021.12.29
  • 발행 : 2022.02.25

초록

The objective of this study is to simulate the flow in pipes with various boundary conditions. Free-pressure fluid model, is used in the pipe based on Navier-Stokes equation. The models are solved by using the numerical method. A problem called "stability of pipes" is used in order to compare frequency and critical fluid velocity. When the initial conditions of problem satisfied the instability conditions, the free-pressure model could accurately predict discontinuities in the solution field. Employing nonlinear strains-displacements, stress-strain energy method the governing equations were derived using Hamilton's principal. Differential quadrature method (DQM) is used for obtaining the frequency and critical fluid velocity. The results of this paper are analyzed by hyperbolic numerical method. Results show that the level of numerical diffusion in the solution field and the range of well-posedness are two important criteria for selecting the two-fluid models. The solutions for predicting the flow variables is approximately equal to the two-pressure model 2. Therefore, the predicted pressure changes profile in the two-pressure model is more consistent with actual physics. Therefore, in numerical modeling of gas-liquid two-phase flows in the vertical pipe, the present model can be applied.

키워드

과제정보

This work was supported by National Key R&D Program of China grant number 2017YFC0805401 and Horizontal Research Project of Beijing Jiaotong University grant number C18L01030.

참고문헌

  1. Al-asadi, M.T., Mohammed, H.A., Kherbeet, A.Sh. and Al-aswadi, A.A. (2017), "Numerical study of assisting and opposing mixed convective nanofluid flows in an inclined circular pipe", Int. Commun. Heat Mass Transf., 85, 81-91. https://doi.org/10.1016/j.icheatmasstransfer.2017.04.015.
  2. Al-Furjan, M.S.H., Farrokhian, A., Keshtegar, B., Kolahchi, R. and Trung, N.T. (2020), "Higher order nonlocal viscoelastic strain gradient theory for dynamic buckling analysis of carbon nanocones", Aerosp. Sci. Technol., 107, 106259. https://doi.org/10.1016/j.ast.2020.106259.
  3. Al-Furjan, M.S.H., Farrokhian, A., Keshtegar, B., Kolahchi, R. and Trung, N.T. (2021b), "Dynamic stability control of viscoelastic nanocomposite piezoelectric sandwich beams resting on Kerr foundation based on exponential piezoelasticity theory", Eur. J. Mech. A Solid., 86, 104169. https://doi.org/10.1016/j.euromechsol.2020.104169.
  4. Al-Furjan, M.S.H., Farrokhian, A., Mahmoud, S.R. and Kolahchi, R. (2021a), "Dynamic deflection and contact force histories of graphene platelets reinforced conical shell integrated with magnetostrictive layers subjected to low-velocity impact", Thin Wall. Struct., 163, 107706. https://doi.org/10.1016/j.tws.2021.107706.
  5. Ban, S., Pao, W. and Nasif, M.S. (2018), "Numerical simulation of two-phase flow regime in horizontal pipeline and its validation", Int. J. Numer. Meth. Heat Fluid Flow, 28, 1279-1314. https://doi.org/10.1108/HFF-05-2017-0195.
  6. Bonizzi, M. and Issa, R. (2003), "A model for simulating gas bubble entrainment in two-phase horizontal slug flow", Int. J. Multiph. Flow, 29, 1685-1717, https://doi.org/10.1016/j.ijmultiphaseflow.2003.09.001.
  7. Bonzanini, A., Picchi, D. and Poesio, P. (2017), "Simplified 1D incompressible two-fluid model with artificial diffusion for slug flow capturing in horizontal and nearly horizontal pipes", Energ., 10, 1372-1390. https://doi.org/10.3390/en10091372.
  8. Colla, L., Fedele, L. and Buschmann, M.H., (2015), "Laminar mixed convection of TiO2-water nanofluid in horizontal uniformly heated pipe flow", Int. J. Therm. Sci., 97, 26-40. https://doi.org/10.1016/j.ijthermalsci.2015.06.013.
  9. Fallahzadeh, R., Aref, L., Gholamiarjenaki, N., Nonejad, Z. and Saghi, M. (2020), "Experimental investigation of the effect of using water and ethanol as working fluid on the performance of pyramid-shaped solar still integrated with heat pipe solar collector", Solar Energy, 207, 10-21. https://doi.org/10.1016/j.solener.2020.06.032.
  10. Ghaitani, M.M. and Majidian, A. (2017), "Frequency and critical fluid velocity analysis of Pipes reinforced with FG-CNTs conveying internal flows", Wind Struct., 24, 267-285. https://doi.org/10.12989/was.2017.24.3.267.
  11. Ghaitani, M.M., Majidian, A. and Shokri, V. (2020), "Holmas, H. (2010), "Numerical simulation of transient roll-waves in two-phase pipe flow", Chem. Eng. Sci., 65, 1811826. https://doi.org/10.1016/j.ces.2009.11.031.
  12. Hussein, A.M. (2017), "Thermal performance and thermal properties of hybrid nanofluid laminar flow in a double pipe heat exchanger", Exp. Therm. Fluid Sci., 88, 37-45. https://doi.org/10.1016/j.expthermflusci.2017.05.015.
  13. Kang, Sh.W., Wang, Y.Ch., Liu, Y.Ch., Lo, H.M., (2017), "Visualization and thermal resistance measurements for a magnetic nanofluid pulsating heat pip", Appl. Therm. Eng., 126, 1044-1050. https://doi.org/10.1016/j.applthermaleng.2017.02.051.
  14. Keshtegar, B., Farrokhian, A., Kolahchi, R. and Trung, N.T. (2020), "Dynamic stability response of truncated nanocomposite conical shell with magnetostrictive face sheets utilizing higher order theory of sandwich panels", Eur. J. Mech. A/Solid., 82, 104010, https://doi.org/10.1016/j.euromechsol.2020.104010.
  15. Kolahchi, R. and Kolahdouzan, F. (2021b), "A numerical method for magneto-hygro-thermal dynamic stability analysis of defective quadrilateral graphene sheets using higher order nonlocal strain gradient theory with different movable boundary conditions", Appl. Math. Model., 91, 458-475. https://doi.org/10.1016/j.apm.2020.09.060.
  16. Kolahchi, R., Hosseini, H. and Esmailpour, M. (2016b), "Differential cubature and quadrature-Bolotin methods for dynamic stability of embedded piezoelectric nanoplates based on visco-nonlocal-piezoelasticity theories", Compos. Struct., 157, 174-186. https://doi.org/10.1016/j.compstruct.2016.08.032.
  17. Kolahchi, R., Keshtegar, B. and Trung, N.T. (2021a), "Optimization of dynamic properties for laminated multiphase nanocomposite sandwich conical shell in thermal and magnetic conditions", Int. J. Sandw. Struct., 10996362211020388. https://doi.org/10.1177/10996362211020388.
  18. Kolahchi, R., Rabani Bidgoli, M., Beygipoor, Gh. and Fakhar, M.H. (2015), "A nonlocal nonlinear analysis for buckling in embedded FG-SWCNT-reinforced microplates subjected to magnetic field", J. Mech. Sci. Tech., 29, 3669-3677, https://doi.org/10.1007/s12206-015-0811-9.
  19. Kolahchi, R., Safari, M. and Esmailpour, M. (2016a), "Dynamic stability analysis of temperature-dependent functionally graded CNT-reinforced visco-plates resting on orthotropic elastomeric medium", Compos. Struct., 150, 255-265. https://doi.org/10.1016/j.compstruct.2016.05.023.
  20. Kolahchi, R., Zarei, M.Sh., Hajmohammad, M.H. and Naddaf Oskouei, A. (2017), "Visco-nonlocal-refined Zigzag theories for dynamic buckling of laminated nanoplates using differential cubature-Bolotin methods", Thin Wall. Struct., 113, 162-169. https://doi.org/10.1016/j.tws.2017.01.016.
  21. Liao, J., Mei, R. and Klausner, J.F. (2008), "A study on the numerical stability of the two-fluid model near ill-posedness", Int. J. Multiph. Flow, 34, 1067-1087. https://doi.org/10.1016/j.ijmultiphaseflow.2008.02.010.
  22. Motezaker, M., Kolahchi, R., Rajak, D.K. and Mahmoud, S.R. (2021), "Influences of fiber reinforced polymer layer on the dynamic deflection of concrete pipes containing nanoparticle subjected to earthquake load", Polym. Compos., 42(8), 4073-4081. https://doi.org/10.1002/pc.26118.
  23. Mubarok, M.H., Zarrouk, S.J., Cater, J.E., Yoong, A.M. and Lim, W. (2021), "Real-time enthalpy measurement of two-phase geothermal fluid flow using load cell sensors: Field testing results", Geothermic., 89, 101930. https://doi.org/10.1016/j.geothermics.2020.101930.
  24. Omgba-Essama, C. (2004), "Numerical modelling of transient gas-liquid flows (application to stratified & slug flow regimes", Ph. D. Thesis, Cranfield University, Cranfield, UK.
  25. Saha, G. and Paul, M.C. (2017), "Transition of nanofluids flow in an inclined heated pipe", Int. Commun. Heat Mass Transf., 82, 49-62. https://doi.org/10.1016/j.icheatmasstransfer.2017.02.017.
  26. Vijayakumar, M., Navaneethakrishnan, P., Kumaresan, G., Kamatchi, R. (2017), "A study on heat transfer characteristics of inclined copper sintered wick heat pipe using surfactant free CuO and Al2O3 nanofluids", J. Taiwan Inst. Chem. Eng., 81, 190-198. https://doi.org/10.1016/j.jtice.2017.10.032.
  27. Wang, D., Hu, Zh., Zhang, L. and Zhou, Y. (2020), "Effect of the working fluid transportation in the copper composite wick on the evaporation efficiency of a flat loop heat pipe", Appl. Therm. Eng., 178, 115515. https://doi.org/10.1016/j.applthermaleng.2020.115515.