DOI QR코드

DOI QR Code

Simplified nonlinear simulation for composite segmental lining of rectangular shield tunnels

  • Zhao, Huiling (Department of Civil Engineering, Shanghai University) ;
  • Liu, Xian (State Key Laboratory for Hazard Reduction in Civil Engineering, Tongji University) ;
  • Yuan, Yong (State Key Laboratory for Hazard Reduction in Civil Engineering, Tongji University)
  • 투고 : 2019.03.07
  • 심사 : 2021.12.29
  • 발행 : 2022.02.25

초록

Steel-concrete composite segments replacing the conventional reinforced concrete segments can provide the rectangular shield tunnel superiorities on bearing capacity, ductility and economy. A simplified model with high-efficiency on computation is proposed for investigating the nonlinear response of the rectangular tunnel lining composed of composite segments. The simulation model is developed by an assembly of nonlinear fiber beam elements and spring elements to express the transfer mechanism of forces through components of composite segments, and radial joints. The simulation is conducted with the considerations of material nonlinearity and geometric nonlinearity associated with the whole loading process. The validity of the model is evaluated through comparison of the proposed nonlinear simulation with results obtained from the full-scale test of the segmental tunnel lining. Furthermore, a parameter study is conducted by means of the simplified model. The results show that the stiffness of the radial joint at haunch of the ling and the thickness of inner steel plate of segments have remarkable influence on the behaviour of the lining.

키워드

과제정보

This research was financially supported by the National Natural Science Foundation of China (Grant No. 52078376, 52038008, 51208292), Natural Science Foundation of Shanghai, China (19ZR1418700) and the State Key Laboratory for Hazard Reduction in Civil Engineering of Tongji University (Grant No. SLDRCE19-A-13, SLDRCE19-B-39).

참고문헌

  1. Blom, C.B.M. (2002), "Design philosophy of concrete linings for tunnels in soft soils", Ph.D. Dissertation, Delft University of Technology, Delft, The Netherlands.
  2. Ding, W., Peng, Y. and Yan, Z. (2013), "Full-scale testing and modeling of the mechanical behaviour of shield TBM tunnel joints", Struct. Eng. Mech., 45(3), 337-354. https://doi.org/10.12989/sem.2013.45.3.337.
  3. Hallquist, J. (2007), LS-DYNA Keyword User's Manual, Livemore Software Technology Corporation, Livemore, California, USA.
  4. Hirosawa, N., Nakashima, M., Imafuku, K. and Nakayama, H. (2008), "Development of composite concrete-packed steel segment", NIPPON STEEL Technical Report, 97, 39-44.
  5. Kawai, K. and Minami, T. (2001), "Development of rectangular shield", KOMATSU Technical Report, 47(148), 46-54.
  6. Li, Z., Soga, K., Wang, F., Wright, P. and Tsuno, K. (2014), "Behaviour of cast-iron tunnel segmental joint from the 3D FE analyses and development of a new bolt-spring model", Tunnel. Underg. Space Technol., 41, 176-192. https://doi.org/10.1016/j.tust.2013.12.012.
  7. Mori, K. and Abe, Y. (2005), "Large rectangular cross-section tunneling by the multi-micro shield tunneling (MMST) method", Tunnel. Underg. Space Technol., 20, 129-141. https://doi.org/10.1016/j.tust.2003.11.012.
  8. Naggar, H.E. and Hinchberger, S.D. (2008), "An analytical solution for jointed tunnel linings in elastic soil or rock". Can. Geotech. J., 45, 1572-1593. https://doi.org/10.1139/T08-075.
  9. Sun, W., Guan, L. and Wen, Z. (2015), "Mechanical analysis and application of large rectangular cross-section shield tunnel", Tunnel Construct., 35(10), 1028-1033. https://doi.org/10.3973/j.issn.1672-741X.2015.10.009.
  10. Yang, C., Mo, H., Chen, J. and Hou, M. (2013), "Study on deformation characteristics of composite lining structure of shield tunnel", Adv. Mater. Res., 815, 240-245. https://doi.org/10.4028/www.scientific.net/AMR.815.240.
  11. Zhang, W. and Koizumi, A. (2010), "Behaviour of composite segment for shield tunnel", Tunnel. Underg. Space Technol., 25, 325-332. https://doi.org/10.1016/j.tust.2010.01.007.
  12. Zhang, W., Guo, X. and Koizumi, A. (2014), "Mechanical analysis and design approach of composite segment for shield tunnel linings", Tunnel. Underg. Construct., 514-524. https://doi.org/10.1061/9780784413449.050.
  13. Zhang, W., Jin, M., Su, R., Zhang, G., Heng, K. and Koizumi, A. (2016), "Experiment on mechanical properties of steel and concrete composite segment for shield tunnel", Chin. J. Highw. Transp., 29(5), 84-93. https://doi.org/10.19721/j.cnki.1001-7372.2016.05.011
  14. Zhao, H., Liu, X. and Bao, Y. (2017), "Nonlinear simulation of tunnel linings with a simplified numerical modelling", Struct. Eng. Mech., 61(5), 593-603. https://doi.org/10.12989/sem.2017.61.5.593.
  15. Zhu, Y., Dong, Z. and Li, P. (2018), "Discussions about key problems in the research and development of Technology system for rectangular shield tunnel", Proceedings of GeoShanghai 2018 International Conference: Tunnelling and Underground Construction, Shanghai, June. https://doi.org/10.1007/978-981-13-0017-2_76.