DOI QR코드

DOI QR Code

Shear strength of steel fiber reinforced concrete deep beams without stirrups

  • Birincioglu, Mustafa I. (Department of Civil Engineering, Tokat Gaziosmanpasa University) ;
  • Keskin, Riza S.O. (Department of Civil Engineering, TED University) ;
  • Arslan, Guray (Department of Civil Engineering, Yildiz Technical University)
  • 투고 : 2020.08.07
  • 심사 : 2021.12.28
  • 발행 : 2022.01.25

초록

Concrete is a brittle material and weak in tension. Traditionally, web reinforcement in the form of vertical stirrups is used in reinforced concrete (RC) beams to take care of principal stresses that may cause failure when they are subjected to shear stresses. In recent decades, the potential of various types of fibers for improving post-cracking behavior of RC beams and replacing stirrups completely or partially have been studied. It has been shown that the use of steel fibers randomly dispersed and oriented in concrete has a significant potential for enhancing mechanical properties of RC beams. However, the studies on deep steel fiber reinforced concrete (SFRC) beams are limited when compared to those focusing on slender beams. An experimental program consisting of three RC and nine SFRC deep beams without stirrups were conducted in this study. Besides, various models developed for predicting the ultimate shear strength and diagonal cracking strength of SFRC deep beams without stirrups were applied to experimental data obtained from the literature and this study.

키워드

과제정보

This work was supported by Research Fund of the Yildiz Technical University. (Project Number: FDK-2020-3821)

참고문헌

  1. Abadel, A.A. and Albidah, A.S. (2021), "Investigation of shear reinforcement schemes for RC deep beams", Arab. J. Sci. Eng., 46, 4747-4763. https://doi.org/10.1007/s13369-020-05123-z.
  2. ACI (1988), ACI 544.4R-88, Design Considerations for Steel Fiber Reinforced Concrete (Reapproved 1999), American Concrete Institute, Farmington Hills, MI, USA.
  3. ACI (1989), Building Code Requirements for Reinforced Concrete (ACI 318-89) and Commentary (ACI 318R-89), American Concrete Institute, Farmington Hills, MI, USA.
  4. Arslan, G. (2014), "Shear strength of steel fiber reinforced concrete (SFRC) slender beams", KSCE J. Civ. Eng., 18(2), 587-594. https://doi.org/10.1007/s12205-014-0320-x.
  5. Arslan, G., Keskin, R.S.O. and Ulusoy, S. (2017), "An experimental study on the shear strength of SFRC beams without stirrups", J. Theor. Appl. Mech., 55(4), 1205-1217. https://doi.org/10.15632/jtam-pl.55.4.1205.
  6. Ashour, S.A., Hasanain, G.S. and Wafa, F.F. (1992), "Shear behaviour of high-strength fiber reinforced concrete beams", ACI Struct. J., 89(2), 176-184. https://doi.org/10.14359/2946.
  7. Batson, G., Jenkins, E. and Spatney, R. (1972), "Steel fibers as shear reinforcement in beams", ACI J. Proc., 69(10), 640-644. https://doi.org/10.14359/7151.
  8. Cho, S.H. and Kim, Y.I. (2003), "Effects of steel fibers on short beams loaded in shear", ACI Struct. J., 100(6), 765-774. https://doi.org/10.14359/12843.
  9. Cucchiara, C., Mendola, L. and Papia, M. (2004), "Effectiveness of stirrups and steel fibers as shear reinforcement", Cement Concrete Compos., 26(7), 777-786. https://doi.org/10.1016/j.cemconcomp.2003.07.001.
  10. Dang, T.D., Tran, D.T. Nguyen-Minh, L. and Nassif, A.Y. (2021), "Shear resistant capacity of steel fibers reinforced concrete deep beams: An experimental investigation and a new prediction model", Struct., 33, 2284-2300. https://doi.org/10.1016/j.istruc.2021.05.091.
  11. Dupont, D. and Vandewalle, L.J.S.P. (2003), "Shear capacity of concrete beams containing longitudinal reinforcement and steel fibers", Spec. Pub., 216, 79-94.
  12. Fang, I.K. and Wu, J.Y. (1994), "Shear behavior of fiber-reinforced HPC deep beams", Spec. Pub., 149, 523-544.
  13. Garcia, S., Pereira, A. and Pierott, R. (2021), "Shear strength of sand-lightweight concrete deep beams with steel fibers", ACI Struct. J., 118(2), 203-214. https://doi.org/10.14359/51729347.
  14. Imam, M., Vandewalle, L. and Mortelmans, F. (1995), "Shear-moment analysis of reinforced high strength concrete beams containing steel fibers", Can. J. Civ. Eng., 22(3), 462-470. https://doi.org/10.1139/l95-054.
  15. Khuntia, M., Stojadinovic, B. and Goel, S.C. (1999), "Shear strength of normal and high-strength fiber-reinforced concrete beams without stirrups", ACI Struct. J., 96(2), 282-289. https://doi.org/10.14359/620.
  16. Kwak, Y.K., Eberhard, M.O., Kim, W.S. and Kim, J. (2002), "Shear strength of steel fiber-reinforced concrete beams without stirrups", ACI Struct. J., 99(4), 530-538. https://doi.org/10.14359/12122.
  17. Li, V.C., Ward, R. and Hamza A.M. (1992), "Steel and synthetic fibers as shear reinforcement", ACI Mater. J., 89(5), 499-508. https://doi.org/10.14359/1822.
  18. Lim, T.Y., Paramasivam, P. and Lee, S.L. (1987), "Shear and moment capacity of reinforced steel-fiber-concrete beams", Mag. Concrete Res., 39(140), 148-160. https://doi.org/10.1680/macr.1987.39.140.148.
  19. Ma, K., Qi, T., Liu, H. and Wang, H. (2018), "Shear behavior of hybrid fiber reinforced concrete deep beams", Mater., 11(10), 2023. https://doi.org/10.3390/ma11102023.
  20. Manju, R., Sathya, S. and Sylviya, B. (2017), "Shear strength of high-strength steel fiber reinforced concrete rectangular beams", Int. J. Civ. Eng. Tech., 8, 1716-1729.
  21. Mansur, M.A. and Alwis, W.A.M. (1984), "Reinforced fiber concrete deep beams with web openings", Int. J. Cement Compos. Lightweight Concrete., 6(4), 263-271. https://doi.org/10.1016/0262-5075(84)90021-6.
  22. Mansur, M.A., Ong, K.C.G. and Paramasivam, P. (1986), "Shear strength of fibrous concrete beams without stirrups", ASCE J. Struct. Eng., 112(9), 2066-2079. https://doi.org/10.1061/(ASCE)0733-9445(1986)112:9(2066).
  23. Mansur, M.A. and Ong, K.C.G. (1991), "Behavior of reinforced fiber concrete deep beams in shear", ACI Struct. J., 88(1), 98-105. https://doi.org/10.14359/3128.
  24. Moradi, M. and Reza Esfahani, M. (2017), "Application of the strut-and-tie method for steel fiber reinforced concrete deep beams", Constr. Build. Mater., 131, 423-437. https://doi.org/10.1016/j.conbuildmat.2016.11.042.
  25. Naaman, A.E. (2003), "Strain hardening and deflection hardening fiber reinforced cement composites", 4th International RILEM Workshop on High Performance Fiber-Reinforced Cement Composites, Ann Arbor, Michigan, June.
  26. Narayanan, R. and Darwish, I.Y.S. (1987), "Use of steel fibers as shear reinforcement", ACI Struct. J., 84(3), 216-227. https://doi.org/10.14359/2654.
  27. Narayanan, R. and Darwish, I.Y.S. (1988), "Fiber concrete deep beams in shear", ACI Struct. J., 85(2), 141-149. https://doi.org/10.14359/2698.
  28. Qissab, M.A. and Salman, M.M. (2018), "Shear strength of nonprismatic steel fiber reinforced concrete beams without stirrups", Struct. Eng. Mech., 67(4), 347-358. https://dx.doi.org/10.12989/sem.2018.67.4.347.
  29. Roberts, T.M. and Ho, N.L. (1982), "Shear failure of deep fiber reinforced concrete beams", Int. J. Cement Compos. Lightweight Concrete., 4(3), 145-152. https://doi.org/10.1016/0262-5075(82)90040-9.
  30. Romualdi J.P. and Mandel J.A., "Tensile strength of concrete affected by uniformly distributed and closely spaced short lengths of wire reinforcement", ACI J. Proc., 61(6), 657-671. https://doi.org/10.14359/7801.
  31. Rosenbusch, J. and Teutsch, M. (2003), "Shear design with (σ-ε) method", Proceedings of International RILEM Workshop on Test and Design Methods for Steel Fiber Reinforced Concrete, RILEM Publications SARL, Bochum, Germany.
  32. Sachan, A.K. and Kameswara Rao, C.V.S. (1990), "Behaviour of fiber reinforced concrete deep beams", Cement Concrete Compos., 12(3), 211-218. https://doi.org/10.1016/0958-9465(90)90022-P.
  33. Sahoo, D.R., Flores, C.A. and Chao, S.H. (2012), "Behavior of steel fiber-reinforced concrete deep beams with large opening", ACI Struct. J., 109(2), 193-204. https://doi.org/10.14359/51683630G.
  34. Sharma, A.K. (1986), "Shear strength of steel fiber reinforced concrete beams", ACI Struct. J., 83(4), 624-628. https://doi.org/10.14359/10559.
  35. Shin, S.W., Oh, J.G. and Ghosh, S.K. (1994), "Shear behavior of laboratory-sized high-strength concrete beams reinforced with bars and steel fibers", Spec. Pub., 142, 181-200.
  36. Smith, K.N. and Vantsiotis, A.S. (1982), "Shear strength of deep beams", ACI J. Proc., 79(3), 201-213. https://doi.org/10.14359/10899.
  37. Swaddiwudhipong, S. and Shanmugam, N.E. (1985), "Fiber-reinforced concrete deep beams with openings", ASCE J. Struct. Eng., 111(8), 1679-1690. https://doi.org/10.1061/(ASCE)0733-9445(1985)111:8(1679).
  38. Swamy, R.N., Mangat, P.S. and Rao, C.K. (1974), "The mechanics of fiber reinforcement of cement matrices", Spec. Pub., 44, 1-28.
  39. Tahenni, T., Chemrouk, M. and Lecompte, T. (2016), "Effect of steel fibers on the shear behavior of high strength concrete beams", Constr. Build. Mater., 105, 14-28. https://doi.org/10.1016/j.conbuildmat.2015.12.010.
  40. TS-EN 197-1 (2012), Cement-Part 1, Composition, specification and conformity criteria for common cements, Turkish Standards Institution, Ankara.
  41. Tuchscherer, R.G. and Quesada, A. (2015), "Replacement of deformed side-face steel reinforcement in deep beams with steel fibers", Struct., 3, 130-136. https://doi.org/10.1016/j.istruc.2015.03.008.
  42. Visalakshia, B.S.S. and Harsha, G.S. (2020), "Enhancement of shear strength of deep beams using hybrid fibers and suggesting an alternative for strut and tie model", Mater. Today Proc., 33(1), 578-582. https://doi.org/10.1016/j.matpr.2020.05.454.
  43. Zewair, M.S., Hamoodi, A.Z. and Ojaimi, M.F. (2021), "Effect of types of fibers on the shear behaviour of deep beam with opening", Period. Eng. Nat. Sci., 9(2), 1086-1095. http://doi.org/10.21533/pen.v9i2.1929.
  44. Zhao, J., Liang, J., Chu, L. and Shen, F. (2018), "Experimental study on shear behavior of steel fiber reinforced concrete beams with high-strength reinforcement", Mater., 11(9), 1682. https://doi.org/10.3390/ma11091682.
  45. Zsutty, T. (1971), "Shear strength prediction for separate categories of simple beam tests", ACI J. Proc., 68(2), 138-143. https://doi.org/10.14359/11300.