DOI QR코드

DOI QR Code

3D FE modeling and parametric analysis of steel fiber reinforced concrete haunched beams

  • Al Jawahery, Mohammed S. (Highways and Bridges Engineering Department, Duhok Polytechnic University) ;
  • Cevik, Abdulkadir (Civil Engineering Department, Gaziantep University) ;
  • Gulsan, Mehmet Eren (Civil Engineering Department, Gaziantep University)
  • 투고 : 2020.10.06
  • 심사 : 2021.12.28
  • 발행 : 2022.01.25

초록

This paper investigates the shear behavior of reinforced concrete haunched beams (RCHBs) without stirrups. The research objective is to study the effectiveness of the ideal steel fiber (SF) ratio, which is used to resist shear strength, besides the influence of main steel reinforcement, compressive strength, and inclination angles of the haunched beam. The modeling and analysis were carried out by Finite Element Method (FE) based on a software package, called Atena-GiD 3D. The program of this study comprises two-part. One of them consists of nine results of experimental SF RCHBs which are used to identify the accuracy of FE models. The other part comprises 81 FE models, which are divided into three groups. Each group differed from another group by the area of main steel reinforcement (As) which are 226, 339, and 509 mm2. The other parameters which are considered in each group in the same quantities to study the effectiveness of them, were steel fiber volumetric ratios (0.0, 0.5, and 1.0)%, compressive strength (20.0, 40.0, 60.0) MPa, and the inclination angle of haunched beam (0.0°, 10.0°, and 15.0°). Moreover, the parametric analysis was carried out on SF RCHBs to clarify the effectiveness of each parameter on the mechanical behavior of SF RCHBs. The results show that the correlation coefficient (R2) between shear load capacities of FE proposed models and shear load capacities of experimental SF RCHBs is 0.9793, while the effective inclination angle of the haunched beam is 10° which contributes to resisting shear strength, besides the ideal ratio of steel fibers is 1% when the compressive strength of SF RCHBs is more than 20 MPa.

키워드

참고문헌

  1. Adebar, P., Mindess, S., Pierre, D.S. and Olund, B. (1997), "Shear tests of fiber concrete beams without stirrups", Struct. J., 94(1), 68-76.
  2. AL-DARRAJI, S.Y. (2018), "Self-compacting steel fiber reinforced concrete (SCSFRC) haunched beam without shear stirrups", M.Sc. Thesis, Gaziantep University.
  3. Al Jawahery, M.S., Gulsan, M.E., Albegmprli, H.M., Mansoori, I.A.H. and Cevik, A. (2019), "Experimental investigation of rehabilitated RC haunched beams via CFRP with 3D-FE modeling analysis", Eng. Struct., 196, 109301. https://doi.org/10.1016/j.engstruct.2019.109301.
  4. Al Jawahery, M.S., Gulsan, M.E., Albegmprli, H.M.A. and Cevik, A. (2021), "Comprehensive shear and flexural study: Experimental and FE modeling of RC haunched beams rehabilitated by basalt fabric", Iran. J. Sci. Tech. Transac. Civil Eng., 1-28. https://doi.org/10.1007/s40996-021-00741-5.
  5. Altun, F., Haktanir, T. and Ari, K. (2006), "Experimental investigation of steel fiber reinforced concrete box beams under bending", Mater. Struct., 39(4), 491-499. https://doi.org/10.1617/s11527-006-9095-y.
  6. Amin, A. and Foster, S.J. (2016), "Shear strength of steel fibre reinforced concrete beams with stirrups", Eng. Struct., 111, 323-332. https://doi.org/10.1016/j.engstruct.2015.12.026.
  7. Aslani, F. and Natoori, M. (2013), "Stress-strain relationships for steel fibre reinforced self-compacting concrete", Struct. Eng. Mech., 46(2), 295-322. https://doi.org/10.12989/sem.2013.46.2.295.
  8. Bui, T.T., Nana, W.S.A., Doucet-Ferru, B., Bennani, A., Lequay, H. and Limam, A. (2020), "Shear performance of steel fiber reinforced concrete beams without stirrups: Experimental investigation", Int. J. Civil Eng., 18(8), 865-881. https://doi.org/10.1007/s40999-020-00505-8.
  9. Campione, G., La Mendola, L. and Papia, M. (2006), "Shear strength of steel fiber reinforced concrete beams with stirrups", Struct. Eng. Mech., 24(1), 107-136. https://doi.org/10.12989/sem.2006.24.1.107.
  10. Casanova, P. and Rossi, P. (1997), "Can steel fibers replace transverse reinforcements in reinforced concrete beams?", Mater. J., 94(5), 341-354.
  11. Cervenka, V., Cervenka, J., Janda, Z. and Pryl, D. (2017), ATENA program documentation, Part 8: User's Manual for ATENA-GiD Interface, Cervenka Consulting, Prague.
  12. Cervenka, V., Jendele, L. and Cervenka, J. (2016), ATENA Program Documentation, Part 1: Theory, Prague.
  13. Chen, J., Liu, X., Liu, H. and Zeng, L. (2018), "Axial compression behavior of circular recycled concrete-filled steel tubular short columns reinforced by silica fume and steel fiber", Steel Compos. Struct., 27(2), 193-200. https://doi.org/10.12989/scs.2018.27.2.193.
  14. Cucchiara, C., La Mendola, L. and Papia, M. (2004), "Effectiveness of stirrups and steel fibres as shear reinforcement", Cement Concrete Compos., 26(7), 777-786. https://doi.org/10.1016/j.cemconcomp.2003.07.001.
  15. Cuenca, E. and Serna, P. (2013), "Shear behavior of prestressed precast beams made of self-compacting fiber reinforced concrete", Constr. Build. Mater., 45, 145-156. https://doi.org/10.1016/j.conbuildmat.2013.03.096.
  16. Dancygier, A.N. and Savir, Z. (2011), "Effects of steel fibers on shear behavior of high-strength reinforced concrete beams", Adv. Struct. Eng., 14(5), 745-761. https://doi.org/10.1260/1369-4332.14.5.745.
  17. Debaiky, S.Y. and Elniema, E.I. (1982), "Behavior and strength of reinforced concrete haunched beams in shear", J. Proc., 79(3), 184-194.
  18. Di Prisco, M., Plizzari, G. and Vandewalle, L. (2009), "Fibre reinforced concrete: New design perspectives", Mater. Struct., 42(9), 1261-1281. https://doi.org/10.1617/s11527-009-9529-4.
  19. Hwang, J.H., Lee, D.H., Ju, H., Kim, K.S., Kang, T.H.K. and Pan, Z. (2016), "Shear deformation of steel fiber-reinforced prestressed concrete beams", Int. J. Concrete Struct. Mater., 10, 53-63. https://doi.org/10.1007/s40069-016-0159-2.
  20. Islam, M.S. and Alam, S. (2013), "Principal component and multiple regression analysis for steel fiber reinforced concrete (SFRC) beams", Int. J. Concrete Struct. Mater., 7(4), 303-317. https://doi.org/10.1007/s40069-013-0059-7.
  21. Kara, I.F. (2013), "Empirical modeling of shear strength of steel fiber reinforced concrete beams by gene expression programming", Neural Comput. Appl., 23(3-4), 823-834. https://doi.org/10.1007/s00521-012-0999-x.
  22. Kara, I.F. and Dundar, C. (2012), "Prediction of deflection of high strength steel fiber reinforced concrete beams and columns", Comput. Concrete, 9(2), 133-151. https://doi.org/10.12989/cac.2012.9.2.133.
  23. Karl, K.W., Lee, D.H., Hwang, J.H., Kim, K.S. and Choi, I.S. (2011), "Revision on material strength of steel fiber-reinforced concrete", Int. J. Concrete Struct. Mater., 5(2), 87-96. https://doi.org/10.4334/IJCSM.2011.5.2.87.
  24. Lee, S.C., Cho, J.Y. and Vecchio, F.J. (2013), "Simplified diverse embedment model for steel fiber-reinforced concrete elements in tension", ACI Mater. J., 110(4), 403-412. https://doi.org/10.14359/51685787.
  25. MacLeod, I.A. and Houmsi, A. (1994), "Shear strength of haunched beams without shear reinforcement", Struct. J., 91(1), 79-89.
  26. Menetrey, P. and Willam, K.J. (1995), "Triaxial failure criterion for concrete and its generalization", Struct. J., 92(3), 311-318.
  27. Michels, J., Christen, R. and Waldmann, D. (2013), "Experimental and numerical investigation on postcracking behavior of steel fiber reinforced concrete", Eng. Fract. Mech., 98(1), 326-349. https://doi.org/10.1016/j.engfracmech.2012.11.004.
  28. Musab A.Q. and Mohammed M.S. (2018), "Shear strength of non-prismatic steel fiber reinforced concrete beams without stirrups", Struct. Eng. Mech., 67(4), 347-358. https://doi.org/10.12989/sem.2018.67.4.347.
  29. Nghiep, V.H. (2011), "Shear design of straight and haunched concrete beams without stirrups", Ph.D. Dissertation of Philosophy, Technische Universitat Hamburg.
  30. Papakonstantinou, C.G. and Katakalos, K. (2009), "Flexural behavior of reinforced concrete beams strengthened with a hybrid inorganic matrix-steel fiber retrofit system", Struct. Eng. Mech., 31(5), 567-585. https://doi.org/10.12989/sem.2009.31.5.567.
  31. Parra-Montesinos, G.J. (2006), "Shear strength of beams with deformed steel fibers", Concrete Int., 28(11), 57-66.
  32. Safan, M.A. (2012), "Behaviour of fiber reinforced concrete beams with spliced tension steel reinforcement", Struct. Eng. Mech., 43(5), 623-636. https://doi.org/10.12989/sem.2012.43.5.623.
  33. Sahoo, D.R. and Kumar, N. (2015), "Monotonic behavior of large-scale SFRC beams without stirrups", Eng. Struct., 92, 46-54. https://doi.org/10.1016/j.engstruct.2015.03.014.
  34. Sahoo, D.R. and Sharma, A. (2014), "Effect of steel fiber content on behavior of concrete beams with and without stirrups", ACI Struct. J., 111(5), 1157-1166. https://doi.org/10.14359/51686821.
  35. Sajdlova, T. (2016), ATENA Documentation-Part 4-7 ATENA Science-GiD FRC Tutorial, 50.
  36. Shoaib, A., Lubell, Adam, S. and Bindiganavile, V.S. (2014), "Size effect in shear for steel fiber reinforced concrete members without stirrups", ACI Struct. J., 111(5), 1081. https://doi.org/10.14359/51686813.
  37. Slater, E., Moni, M. and Alam, M.S. (2012), "Predicting the shear strength of steel fiber reinforced concrete beams", Constr. Build. Mater., 26(1), 423-436. https://doi.org/10.1016/j.conbuildmat.2011.06.042.
  38. Song, P.S. and Hwang, S. (2004), "Mechanical properties of high-strength steel fiber-reinforced concrete", Constr. Build. Mater., 18(9), 669-673. https://doi.org/10.1016/j.conbuildmat.2004.04.027.
  39. Tena-Colunga, A., Archundia-Aranda, H.I. and Urbina-Californias, L.A. (2020), "Equations for shear design of continuous reinforced-concrete haunched beams based on stress fields and truss models", Pract. Period. Struct. Des. Constr., 25(3), 4020012. https://doi.org/10.1061/(ASCE)SC.1943-5576.0000482.
  40. Voo, Y.L., Foster, S.J. and Gilbert, R.I. (2006), "Shear strength of fiber reinforced reactive powder concrete prestressed girders without stirrups", J. Adv. Concrete Tech., 4(1), 123-132. https://doi.org/10.3151/jact.4.123.
  41. Yoo, D.Y., Yoon, Y.S. and Banthia, N. (2015), "Flexural response of steel-fiber-reinforced concrete beams: Effects of strength, fiber content, and strain-rate", Cement Concrete Compos., 64, 84-92. https://doi.org/10.1016/j.cemconcomp.2015.10.001.
  42. Zarrin, O. and Khoshnoud, H.R. (2016), "Experimental investigation on self-compacting concrete reinforced with steel fibers", Struct. Eng. Mech., 59(1), 133-151. https://doi.org/10.12989/sem.2016.59.1.133.