References
- Bell A, Ayoub AF, Siebert P. Assessment of the accuracy of a three-dimensional imaging system for archiving dental study models. J Orthod 2003;30:219-23. https://doi.org/10.1093/ortho/30.3.219
- Council of Faculty of Orthodontics. Textbook of orthodontics. 2nd ed. Seoul: DaehanNarae Publishing Inc.; 2006. p. 170-2.
- Fleming PS, Marinho V, Johal A. Orthodontic measurements on digital study models compared with plaster models: a systematic review. Orthod Craniofac Res 2011;14:1-16. https://doi.org/10.1111/j.1601-6343.2010.01503.x
- Stevens DR, Flores-Mir C, Nebbe B, Raboud DW, Heo G, Major PW. Validity, reliability, and reproducibility of plaster vs digital study models: comparison of peer assessment rating and Bolton analysis and their constituent measurements. Am J Orthod Dentofacial Orthop 2006;129:794-803. https://doi.org/10.1016/j.ajodo.2004.08.023
- Enforcement Regulation of the Medical Law, Korea. Article 15 [Internet]. Ministry of Health and Welfare; 2015 [updated 2016 Dec 29; cited 2020 Mar 2]. Available from: https://www.law.go.kr/LSW/lsInfoP.do?efYd=20210301&lsiSeq=196454#0000.
- Korean Association of Orthodontists. Legal advice no. 324, 492 [Internet]. Korean Association of Orthodontists [updated 2018 Aug 1; cited 2020 Mar 2]. Available from: https://www.kao.or.kr/board/list.html?code=lawfirm.
- Mizrahi E. Risk management in clinical practice. Part 7. Dento-legal aspects of orthodontic practice. Br Dent J 2010;209:381-90. https://doi.org/10.1038/sj.bdj.2010.926
- Charangowda BK. Dental records: an overview. J Forensic Dent Sci 2010;2:5-10. https://doi.org/10.4103/0974-2948.71050
- Wiranto MG, Engelbrecht WP, Tutein Nolthenius HE, van der Meer WJ, Ren Y. Validity, reliability, and reproducibility of linear measurements on digital models obtained from intraoral and cone-beam computed tomography scans of alginate impressions. Am J Orthod Dentofacial Orthop 2013;143:140-7. https://doi.org/10.1016/j.ajodo.2012.06.018
- Hazeveld A, Huddleston Slater JJ, Ren Y. Accuracy and reproducibility of dental replica models reconstructed by different rapid prototyping techniques. Am J Orthod Dentofacial Orthop 2014;145:108-15. https://doi.org/10.1016/j.ajodo.2013.05.011
- Wan Hassan WN, Yusoff Y, Mardi NA. Comparison of reconstructed rapid prototyping models produced by 3-dimensional printing and conventional stone models with different degrees of crowding. Am J Orthod Dentofacial Orthop 2017;151:209-18. https://doi.org/10.1016/j.ajodo.2016.08.019
- Camardella LT, de Vasconcellos Vilella O, Breuning H. Accuracy of printed dental models made with 2 prototype technologies and different designs of model bases. Am J Orthod Dentofacial Orthop 2017;151:1178-87. https://doi.org/10.1016/j.ajodo.2017.03.012
- Yourtee D, Emery J, Smith RE, Hodgson B. Stereolithographic models of biopolymers. J Mol Graph Model 2000;18:26-8, 59-60. https://doi.org/10.1016/S1093-3263(00)00029-2
- Raju BS, Chandrashekar U, Drakshayani DN, Chockalingam K. Determining the influence of layer thickness for rapid prototyping with Stereolithography (SLA) process. Int J Eng Sci Technol 2010;2:3199-205.
- Cuperus AM, Harms MC, Rangel FA, Bronkhorst EM, Schols JG, Breuning KH. Dental models made with an intraoral scanner: a validation study. Am J Orthod Dentofacial Orthop 2012;142:308-13. https://doi.org/10.1016/j.ajodo.2012.03.031
- Brown GB, Currier GF, Kadioglu O, Kierl JP. Accuracy of 3-dimensional printed dental models reconstructed from digital intraoral impressions. Am J Orthod Dentofacial Orthop 2018;154:733-9. https://doi.org/10.1016/j.ajodo.2018.06.009
- Anh JW, Park JM, Chun YS, Kim M, Kim M. A comparison of the precision of three-dimensional images acquired by 2 digital intraoral scanners: effects of tooth irregularity and scanning direction. Korean J Orthod 2016;46:3-12. https://doi.org/10.4041/kjod.2016.46.1.3
- Loflin WA, English JD, Borders C, Harris LM, Moon A, Holland JN, et al. Effect of print layer height on the assessment of 3D-printed models. Am J Orthod Dentofacial Orthop 2019;156:283-9. https://doi.org/10.1016/j.ajodo.2019.02.013
- Naidu D, Freer TJ. Validity, reliability, and reproducibility of the iOC intraoral scanner: a comparison of tooth widths and Bolton ratios. Am J Orthod Dentofacial Orthop 2013;144:304-10. https://doi.org/10.1016/j.ajodo.2013.04.011
- Darroudi AM, Kuijpers-Jagtman AM, Ongkosuwito EM, Suttorp CM, Bronkhorst EM, Breuning KH. Accuracy of a computed tomography scanning procedure to manufacture digital models. Am J Orthod Dentofacial Orthop 2017;151:995-1003. https://doi.org/10.1016/j.ajodo.2016.12.013
- Camardella LT, Ongkosuwito EM, Penning EW, Kuijpers-Jagtman AM, Vilella OV, Breuning KH. Accuracy and reliability of measurements performed using two different software programs on digital models generated using laser and computed tomography plaster model scanners. Korean J Orthod 2020;50:13-25. https://doi.org/10.4041/kjod.2020.50.1.13
- Porter JL, Carrico CK, Lindauer SJ, Tufekci E. Comparison of intraoral and extraoral scanners on the accuracy of digital model articulation. J Orthod 2018;45:275-82. https://doi.org/10.1080/14653125.2018.1500773
- Yoo JK, Kang YK, Lee SJ, Kim SH, Moon CH. Accuracy of inter-arch measurements performed on digital models generated using two types of intraoral scanners: ex vivo study. J Korean Dent Assoc 2020;58:194-205. https://doi.org/10.22974/JKDA.2020.58.4.001
- Wesemann C, Muallah J, Mah J, Bumann A. Accuracy and efficiency of full-arch digitalization and 3D printing: a comparison between desktop model scanners, an intraoral scanner, a CBCT model scan, and stereolithographic 3D printing. Quintessence Int 2017;48:41-50.
- Saleh WK, Ariffin E, Sherriff M, Bister D. Accuracy and reproducibility of linear measurements of resin, plaster, digital and printed study-models. J Orthod 2015;42:301-6. https://doi.org/10.1179/1465313315Y.0000000016
- Hayashi K, Sachdeva AU, Saitoh S, Lee SP, Kubota T, Mizoguchi I. Assessment of the accuracy and reliability of new 3-dimensional scanning devices. Am J Orthod Dentofacial Orthop 2013;144:619-25. https://doi.org/10.1016/j.ajodo.2013.04.021
- Sherman SL, Kadioglu O, Currier GF, Kierl JP, Li J. Accuracy of digital light processing printing of 3-dimensional dental models. Am J Orthod Dentofacial Orthop 2020;157:422-8. https://doi.org/10.1016/j.ajodo.2019.10.012
- American Board of Orthodontics. Digital model and 3D printing requirements [Internet]. American Board of Orthodontics; 2013 [updated 2016 Jun 30; cited 2019 Nov 11]. Available from: https://www.americanboardortho.com/media/1157/abo-digital-model-requirements.pdf.
- Camardella LT, Vilella OV, van Hezel MM, Breuning KH. Accuracy of stereolithographically printed digital models compared to plaster models. J Orofac Orthop 2017;78:394-402. https://doi.org/10.1007/s00056-017-0093-1
- Rebong RE, Stewart KT, Utreja A, Ghoneima AA. Accuracy of three-dimensional dental resin models created by fused deposition modeling, stereolithography, and Polyjet prototype technologies: a comparative study. Angle Orthod 2018;88:363-9. https://doi.org/10.2319/071117-460.1
- Reuschl RP, Heuer W, Stiesch M, Wenzel D, Dittmer MP. Reliability and validity of measurements on digital study models and plaster models. Eur J Orthod 2016;38:22-6. https://doi.org/10.1093/ejo/cjv001
- Westerlund A, Tancredi W, Ransjo M, Bresin A, Psonis S, Torgersson O. Digital casts in orthodontics: a comparison of 4 software systems. Am J Orthod Dentofacial Orthop 2015;147:509-16. https://doi.org/10.1016/j.ajodo.2014.11.020