DOI QR코드

DOI QR Code

Analysis of the strain energy release rate for time-dependent delamination in multilayered beams with creep

  • Rizov, Victor I. (Department of Technical Mechanics, University of Architecture, Civil Engineering and Geodesy)
  • Received : 2021.04.05
  • Accepted : 2021.01.18
  • Published : 2022.03.25

Abstract

This paper is focused on delamination analysis of a multilayered inhomogeneous viscoelastic beam subjected to linear creep under constant applied stress. The viscoelastic model that is used to treat the creep consists of consecutively connected units. Each unit consists of one spring and two dashpots. The number of units in the model is arbitrary. The modulus of elasticity of the spring in each unit changes with time. Besides, the modulii of elasticity and the coefficients of viscosity change continuously along the thickness, width and length in each layer since the material is continuously inhomogeneous in each layer of the beam. A time-dependent solution to the strain energy release rate for the delamination is derived. A time-dependent solution to the J-integral is derived too. A parametric analysis of the strain energy release rate is carried-out by applying the solution derived. The influence of various factors such as creep, material inhomogeneity, the change of the modulii of elasticity with time and the number of units in the viscoelastic model on the strain energy release rate are clarified.

Keywords

References

  1. Abderezak, R., Daouadji, T.H. and Rabia, B. (2021), "Aluminum beam reinforced by externally bonded composite materials", Adv. Mater. Res., Int. J., 10(1), 23-44. http://doi.org/10.12989/amr.2021.10.1.023
  2. Ahmed, R.A., Fenjan, R.A., Hamad, L.B. and Faleh, N.M. (2020), "A review of effects of partial dynamic loading on dynamic response of nonlocal functionally graded material beams", Adv. Mater. Res., Int. J., 9(1), 33-48. http://doi.org/10.12989/amr.2020.9.1.033
  3. Arda, M. (2020), "Axial dynamics of functionally graded Rayleigh-Bishop nanorods", Microsyst. Technol., 1, 1-17. https://doi.org/10.1007/s00542-020-04950-2
  4. Arda, M. and Aydogdu, M. (2016), "Torsional wave propagation of CNTS via different nonlocal gradient theories", Proceedings of the 23rd International Congress on Sound and Vibration 8ICSV23, Athens, Greece, July. https://doi.org/10.1007/s00339-016-9751-1
  5. Aydogdu, M., Arda, M. and Filiz, S. (2018), "Vibration of axially functionally graded nano rods and beams with a variable nonlocal parameter", Adv. Nano Res., Int. J., 6(3), 257-278. https://doi.org/10.12989/anr.2018.6.3.257
  6. Broek, D. (1986), Elementary Engineering Fracture Mechanics, Springer.
  7. Butcher, R.J., Rousseau, C.E. and Tippur, H.V. (1999), "A functionally graded particulate composite: Measurements and Failure Analysis", Acta. Mater., 47(2), 259-268. https://doi.org/10.1016/S1359-6454(98)00305-X
  8. Gasik, M.M. (2010), "Functionally graded materials: bulk processing techniques", Int. J. Mater. Product Technol., 39(1-2), 20-29. https://doi.org/10.1504/IJMPT.2010.034257
  9. Hedia, H.S., Aldousari, S.M., Abdellatif, A.K. and Fouda, N.A. (2014), "New design of cemented stem using functionally graded materials (FGM)", Biomed. Mater. Eng., 24(3), 1575-1588. https://doi.org/10.3233/BME-140962
  10. Hsueh, C.H., Tuan, W.H. and Wei, W.C.J. (2009), "Analyses of steady-state interface fracture of elastic multilayered beams under four-point bending", Scripta Mater., 60, 721-724. https://doi.org/10.1016/j.scriptamat.2009.01.001
  11. Hutchinson, J. and Suo, Z. (1991), "Mixed mode cracking in layered materials", Adv. Appl. Mech., 29, 63-191. https://doi.org/10.1016/S0065-2156(08)70164-9
  12. Kursun, A. and Topcu, M. (2013), "Thermal stress analysis of functionally graded disc with variable thickness due to linearly increasing temperature load", Arab J. Sci. Eng., 38, 3531-3549. https://doi.org/10.1007/s13369-013-0626-x
  13. Kursun, A., Topcu, M. and Yucel, U. (2012), "Stress analysis of a rotating fgm circular disc with exponentially-varying properties", Proceedings of the ASME 2012 International Mechanical Engineering Congress & Exposition IMECE2012, Houston, TX, USA, November, pp. 1-5. https://doi.org/10.1115/IMECE2012-85592
  14. Kursun, A., Kara, E., Cetin, E., Aksoy, S. and Kesimli, A. (2014), "Mechanical and thermal stresses in functionally graded cylinders", Int. J. Mech. Aerosp. Indust. Mechatron. Manuf. Eng., 8(2), 303-308. https://doi.org/10.5281/zenodo.1090725
  15. Mahamood, R.M. and Akinlabi, E.T. (2017), Functionally Graded Materials, Springer.
  16. Malzbender, J. (2004), "Mechanical and thermal stresses in multilayered materials", J. Appl. Phys., 95(4), 1780. https://doi.org/10.1063/1.1642289
  17. Markworth, A.J., Ramesh, K.S. and Parks, Jr.W.P. (1995), "Review: modeling studies applied to functionally graded materials", J. Mater. Sci., 30(3), 2183-2193. https://doi.org/10.1007/BF01184560
  18. Miyamoto, Y., Kaysser, W.A., Rabin, B.H., Kawasaki, A. and Ford, R.G. (1999), Functionally Graded Materials: Design, Processing and Applications, Kluwer Academic Publishers, Dordrecht/London/Boston.
  19. Nemat-Allal, M.M., Ata, M.H., Bayoumi, M.R. and Khair-Eldeen, W. (2011), "Powder metallurgical fabrication and microstructural investigations of Aluminum/Steel functionally graded material", Mater. Sci. Applicat., 2(5), 1708-1718. https://doi.org/10.4236/msa.2011.212228.
  20. Nguyen, S.N., Lee, J. and Cho, M. (2015), "Efficient higher-order zig-zag theory for viscoelastic laminated composite plates", Int. J. Solids Struct., 62, 174-185. https://doi.org/10.1016/j.ijsolstr.2015.02.027
  21. Nguyen, S.N., Lee, J., Han, J.W. and Cho, M. (2020), "A coupled hygrothermo-mechanical viscoelastic analysis of multilayered composite plates for long-term creep behaviors", Compos. Struct., 242, 112030. https://doi.org/10.1016/j.compstruct.2020.112030
  22. Rabia, B., Daouadji, T.H. and Abderezak, R. (2020), "Predictions of the maximum plate end stresses of imperfect FRP strengthened RC beams: study and analysis", Adv. Mater. Res., Int. J., 9(4), 265-287. https://doi.org/10.12989/amr.2020.9.4.265
  23. Rizov, V.I. (2016), "Elastic-plastic fracture of functionally graded circular shafts in torsion", Adv. Mater. Res., Int. J., 5(4), 299-318. https://doi.org/10.12989/amr.2016.5.4.299
  24. Rizov, V.I. (2017), "Analysis of longitudinal cracked two-dimensional functionally graded beams exhibiting material non-linearity", Frattura ed Integrita Strutturale, 41, 498-510. https://doi.org/10.3221/IGF-ESIS.41.61
  25. Rizov, V.I. (2018), "Analysis of cylindrical delamination cracks in multilayered functionally graded nonlinear elastic circular shafts under combined loads", Frattura ed Integrita Strutturale, 46, 158-217. https://doi.org/10.3221/IGF-ESIS.46.16
  26. Rizov, V.I. (2020), "Longitudinal fracture analysis of inhomogeneous beams with continuously changing radius of cross-section along the beam length", Strength Fract. Complex.: Int. J., 13, 31-43. https://doi.org/10.3233/SFC-200250
  27. Rizov, V.I. (2021), "Viscoelastic inhomogeneous beams under step loading: a longitudinal fracture analysis", IOP Conference Series: Mater. Sci. Eng., 1031, 012008. https://doi.org/10.1088/1757-899X/1031/1/01200
  28. Rizov, V. and Altenbach, H. (2019), "Application of the Classical Beam Theory for Studying Lengthwise Fracture of Functionally Graded Beams", TECHNISCHE MECHANIK, 39(2), 229-240. https://doi.org/10.24352/UB.OVGU-2019-021
  29. Rizov, V. and Altenbach, H. (2020a), "Longitudinal fracture analysis of inhomogeneous beams with continuously varying sizes of the cross-section along the beam length", Frattura ed Integrita Strutturale, 53, 38-50. https://doi.org/10.3221/IGF-ESIS.53.04
  30. Rizov, V.I. and Altenbach, H. (2020b), "Influence of material non-linearity on delamination in multilayered three-point bending beams", J. Theor. Appl. Mech., 50, 70-82. https://doi.org/10.7546/JTAM.50.20.01.07
  31. Uymaz, B. (2013), "Forced vibration analysis of functionally graded beams using nonlocal elasticity", Compos. Struct., 105, 227-239. https://doi.org/10.1016/j.compstruct.2013.05.006
  32. Uymaz, B. (2014a), "Corrigendum to "Forced vibration analysis of functionally graded beams using nonlocal elasticity", Compos. Struct., 107, 749-461. https://doi.org/10.1016/j.compstruct.2013.09.038
  33. Uymaz, B. (2014b), "Comparison of free vibration and buckling behavior of cross-ply laminated plates with isotropic and orthotropic plates", Int. J. Eng. Appl. Sci., 5(4), 13-34. https://dergipark.org.tr/tr/pub/ijeas/issue/23589/251204
  34. Wu, X.L., Jiang, P., Chen, L., Zhang, J.F., Yuan, F.P. and Zhu, Y.T. (2014), "Synergetic strengthening by gradient structure", Mater. Res. Lett., 2(1), 185-191. https://doi.org/10.1080/21663831.2014.935821