DOI QR코드

DOI QR Code

Comparative study of finite element analysis and generalized beam theory in prediction of lateral torsional buckling

  • Sharma, Shashi Kant (Department of Civil Engineering, Dr. B R Ambedkar National Institute of Technology) ;
  • Kumar, K.V. Praveen (Department of Civil Engineering, Dr. B R Ambedkar National Institute of Technology) ;
  • Akbar, M. Abdul (Department of Civil Engineering, Dr. B R Ambedkar National Institute of Technology) ;
  • Rambabu, Dadi (Department of Civil Engineering, Dr. B R Ambedkar National Institute of Technology)
  • 투고 : 2021.05.19
  • 심사 : 2021.11.25
  • 발행 : 2022.03.25

초록

In the construction industry, thin-walled frame elements with very slender open cross-sections and low torsional stiffness are often subjected to a complex loading condition where axial, bending, shear and torsional stresses are present simultaneously. Hence, these often fail in instability even before the yield capacity is reached. One of the most common instability conditions associated with thin-walled structures is Lateral Torsional Buckling (LTB). In this study, a first order Generalized Beam Theory (GBT) formulation and numerical analysis of cold-formed steel lipped channel beams (C80×40×10×1, C90×40×10×1, C100×40×10×1, C80×40×10×1.6, C90×40×10×1.6 and C100×40×10×1.6) subjected to uniform moment is carried out to predict pure Lateral Torsional Buckling (LTB). These results are compared with the Finite Element Analysis of the beams modelled with shell elements using ABAQUS and analytical results based on Euler's buckling formula. The mode wise deformed shape and modal participation factors are obtained for comparison of the responses along with the effect of varying the length of the beam from 2.5 m to 10 m. The deformed shapes of the beam for different modes and GBTUL plots are analyzed for comparative conclusions.

키워드

참고문헌

  1. Adany, S. (2019), "Modal identification of thin-walled members by using the constrained finite element method", Thin-Wall. Struct., 140, 31-42. https://doi.org/10.1016/j.tws.2019.03.029
  2. Anbarasu, M. (2016), "Local-distortional buckling interaction on cold-formed steel lipped channel beams", Thin-Wall. Struct., 98, 351-359. https://doi.org/10.1016/j.tws.2015.10.003
  3. Basaglia, C. and Camotim, D. (2015), "Buckling analysis of thin-walled steel structural systems using generalized beam theory (GBT)", Int. J. Struct. Stabil. Dyn., 15(1), 1-28. https://doi.org/10.1142/S0219455415400040
  4. Basaglia, C., Camotim, D. and Silvestre, N. (2009), "GBT-based local, distortional and global buckling analysis of thin-walled steel frames", Thin-Wall. Struct., 47(11), 1246-1264. https://doi.org/10.1016/j.tws.2009.04.003
  5. Bebiano, R., Silvestre, N. and Camotim, D. (2008), "GBTUL - A code for the buckling analysis of coldformed steel members", Proceedings of the 19th International Specialty Conference on Recent Research and Developments in Cold-Formed Steel Design and Construction, St. Louis, MO, USA, October, pp. 61-79.
  6. Bebiano, R., Camotim, D. and Goncalves, R. (2018), "GBTUL 2. 0 - A second-generation code for the GBT-based buckling and vibration analysis of thin-walled members", Thin-Wall. Struct., 124, 235-257. https://doi.org/10.1016/j.tws.2017.12.002
  7. Collin, P., Moller, M. and Johansson, B. (1998), "Lateral-torsional buckling of continuous bridge girders", J. Constr. Steel Res., 45(2), 217-235. https://doi.org/10.1016/S0143-974X(97)00063-1
  8. David, M., Rodrigo, G. and Dinar, C. (2020), "Combining shell and GBT-based finite elements: Linear and bifurcation analysis", Thin-Wall. Struct., 152, 1-14. https://doi.org/10.1016/j.tws.2020.106665
  9. Davies, J.M. and Leach, P. (1992), "Some applications of generalized beam theory", In: Session 08: Special Analysis and Current Research, pp. 479-501.
  10. Davies, J.M. and Leach, P. (1994), "First-order generalised beam theory", J. Constr. Steel Res., 31(2-3), 187-220. https://doi.org/10.1016/0143-974X(94)90010-8
  11. Davies, J.M., Leach, P. and Heinz, D. (1994), "Second-order generalised beam theory", J. Constr. Steel Res., 31(2-3), 221-241. https://doi.org/10.1016/0143-974X(94)90011-6
  12. Dolamune, K.N. and Mahendran, M. (2012), "Behaviour and design of cold-formed steel beams subject to lateral-torsional buckling", Thin-Wall. Struct., 51, 25-38. https://doi.org/10.1016/j.tws.2011.10.012
  13. Erkmen, R.E. and Attard, M.M. (2011), "Lateral-torsional buckling analysis of thin-walled beams including shear and pre-buckling deformation effects", Int. J. Mech. Sci., 53(10), 918-925. https://doi.org/10.1016/j.ijmecsci.2011.08.006
  14. Giovanni, G., Rodrigo, G., Antonio, B., David, M., Rui, B., Leonardo, L., Domenico, M. and Dinar, C. (2016), "Deformation modes of thin-walled members: A comparison between the method of Generalized Eigenvectors and Generalized Beam Theory", Thin-Wall. Struct., 100, 192-212. http://dx.doi.org/10.1016/j.tws.2015.11.013
  15. Goncalves, R. and Camotim, D. (2007), "Thin-walled member plastic bifurcation analysis using generalised beam theory", Adv. Eng. Software, 38(8-9), 637-646. https://doi.org/10.1016/j.advengsoft.2006.08.027
  16. Goncalves, R. and Camotim, D. (2012), "Geometrically non-linear Generalised Beam Theory for elastoplastic thin-walled metal members", Thin-Wall. Struct., 51, 121-129. https://doi.org/10.1016/j.tws.2011.10.006
  17. Goncalves, R., Dinis, P.B. and Camotim, D. (2009), "GBT formulation to analyse the first-order and buckling behaviour of thin-walled members with arbitrary cross-sections", Thin-Wall. Struct., 47(5), 583-600. https://doi.org/10.1016/j.tws.2008.09.007
  18. Kasiviswanathan, M. and Anbarasu, M. (2021), "Simplified approach to estimate the lateral torsional buckling of GFRP channel beams", Struct. Eng. Mech., Int. J., 77(4), 523-533. http://doi.org/10.12989/sem.2021.77.4.523
  19. Manta, D., Goncalves, R. and Camotim, D. (2020), "Combining shell and GBT-based finite elements: Linear and bifurcation analysis", Thin-Wall. Struct., 152, 106665. https://doi.org/10.1016/j.tws.2020.106665
  20. Mehri, H., Crocetti, R. and Gustafsson, P.J. (2015), "Unequally spaced lateral bracings on compression flanges of steel girders", Structures, 3, 236-243. https://doi.org/10.1016/j.istruc.2015.05.003
  21. Michal, J.D. (1992), "Some applications of generalized beam theory", Proceedings of the 11th International Specialty Conference on Cold-Formed Steel Structures, pp. 479-501.
  22. Mohammad, R., Amir, RM. and Ali, A. (2018), "Lateral-torsional buckling of functionally graded tapered Ibeams considering lateral bracing", Steel Compos. Struct., Int. J., 28(4), 403-414. http://doi.org/10.12989/scs.2018.28.4.403
  23. Nandini, P. and Kalyanaraman, V. (2010), "Strength of cold-formed lipped channel beams under interaction of local, distortional and lateral torsional buckling", Thin-Wall. Struct., 48(10-11), 872-877. https://doi.org/10.1016/j.tws.2010.04.013
  24. Nedelcu, M. and Muresan, A.A. (2017), "GBT-based Finite Element formulation for elastic buckling analysis of conical shells", Special Issue: Proceedings of Eurosteel 2017, 1(2-3), 1381-1389. https://doi.org/10.1002/cepa.180
  25. Nguyen, C.T., Moon, J., Le, V.N. and Lee, H.E. (2010), "Lateral-torsional buckling of I-girders with discrete torsional bracings", J. Constr. Steel Res., 66(2), 170-177. https://doi.org/10.1016/j.jcsr.2009.09.011
  26. Nguyen, C.T., Joo, H.S., Moon, J. and Lee, H.E. (2012), "Flexural-torsional buckling strength of I-girders with discrete torsional braces under various loading conditions", Eng. Struct., 36, 337-350. https://doi.org/10.1016/j.engstruct.2011.12.022
  27. Rossi, A., Carlos, H.M., Nicoletti, R.S. and desouza, A.S.C. (2020a), "Reassesment of lateral torsional buckling in hot-holled I-beams", Structures, 26, 524-536. https://doi.org/10.1016/j.istruc.2020.04.041
  28. Rossi, A., Ferreira, F.P.V., Carlos, H.M. and Junior, E.C.M. (2020b), "Assessment of lateral distortional buckling resistance in welded I-beams", J. Constr. Steel Res., 166, 105924. https://doi.org/10.1016/j.jcsr.2019.105924
  29. Roy, K., Ting, T.C.H., Lau, H.H. and Lim, J.B.P. (2018), "Nonlinear behavior of axially loaded back-to-back built-up cold-formed steel un-lipped channel sections", Steel Compos. Struct., Int. J., 28(2), 233-250. http://doi.org/10.12989/scs.2018.28.2.233
  30. Roy, K., Ting, T.C.H., Lau, H.H. and Lim, J.B.P. (2019), "Finite element modelling of back-to-back built-up cold-formed stainless-steel lipped channels under axial compression", Steel Compos. Struct., Int. J., 33(1), 37-66. http://doi.org/10.12989/scs.2018.28.2.233
  31. Schardt, R. (1994), "Generalized beam theory-an adequate method for coupled stability problems", ThinWall. Struct., 19(2-4), 161-180. https://doi.org/10.1016/0263-8231(94)90027-2
  32. Selcuk, B. (2019), "Lateral torsional buckling of steel I-beams: Effect of initial geometric imperfection", Steel Compos. Struct., Int. J., 30(5), 483-492. http://doi.org/10.12989/scs.2019.30.5.483
  33. Sharma, S.K., Kumar, K.V.P., Akbar, M.A. and Rambabu, D. (2022), "Application of Generalised Beam Theory in Predicting Lateral Torsional Buckling of Thin-Walled Steel Sections", Proceedings of SECON'21. Lecture Notes in Civil Engineering, 171. https://doi.org/10.1007/978-3-030-80312-4_4
  34. Yuan, W. and Nan, S. (2019), "An Analytical Solution of Local - Global Interaction Buckling of Cold - Formed Steel Channel - Section Columns", Int. J. Steel Struct., 19(5), 1578-1591. https://doi.org/10.1007/s13296-019-00232-4
  35. Yura, J.A. (2001), "Fundamentals of beam bracing", Eng. J., 38(1), 11-26.