DOI QR코드

DOI QR Code

Strength of connection fixed by TOBs considering out-of-plane tube wall deformation-Part 1: Tests and numerical studies

  • Wulan, Tuoya (Civil Engineering College of Shandong University) ;
  • Wang, Peijun (Civil Engineering College of Shandong University) ;
  • Xia, Chengxin (Civil Engineering College of Shandong University) ;
  • Liu, Xinyu (Civil Engineering College of Shandong University) ;
  • Liu, Mei (Civil Engineering College of Shandong University) ;
  • Liu, Fangzhou (Civil Engineering College of Shandong University) ;
  • Zhao, Ou (School of Civil and Environmental Engineering, Nanyang Technological University) ;
  • Zhang, Lulu (School of Civil and Environmental Engineering, Nanyang Technological University)
  • Received : 2020.11.15
  • Accepted : 2021.11.10
  • Published : 2022.01.10

Abstract

This paper presents a study on the behavior of a bolted T-stub to square tube connection using Thread-fixed One-side Bolts (TOBs) through tests and numerical simulations. It outlines a research work of four connections with focus on the failure modes and strengths of the connection under tensile load. It was observed that the thread anchor failure caused by shear failure of hole threads controlled the final failure of the connection in the tests. Meanwhile, the out-of-plane deformation of tube wall resulted in the contact separation between hole threads and bolt threads, which in turn reduced the shear strength of hole threads. Finite element models (FEMs) allowing for the configuration details of the TOBs fixed connection are then developed and compared with the test results. Subsequently, the failure mechanism of hole threads and stress distribution of each component are analyzed based on FEM results. It was concluded that the ultimate strength of connection was not only concerned with the shear strength of hole threads, but also was influenced by the plastic out-of-plane deformation of tube wall. These studies lay a foundation for the establishment of suitable design methods of this type of connection.

Keywords

Acknowledgement

The authors wish to acknowledge supports from the National Natural Science Foundation of China (52078280) and the Key Project of Research and Development of Shandong Province (2019GSF110011).

References

  1. Agheshlui, H., Goldsworthy, H., Gad. E. and Olivia Mirza, O. (2017), "Anchored blind bolted composite connection to a concrete filled steel tubular column", Steel Comp. Struct., 23(1), 115-130. https://doi.org/10.12989/scs.2017.23.1.115.
  2. Antimo, M.D., Demonceau, J.F., Jaspart, J.P., Latour, M. and Rizzano, G. (2017), "Experimental and theoretical analysis of shear bolted connections for tubular structures". J. Constr. Steel Res., 138(1), 264-282. https://doi.org/10.1016/j.jcsr.2017.07.015.
  3. Barnett, T.C., Tizani, W. and Nethercot, D.A. (2001), "The Practice of Blind Bolting Connections to Structural Hollow Sections: A Review", Steel Comp. Struct., 1(1), 1-16. https://doi.org/10.1296/SCS2001.01.01.01.
  4. BS EN 1090-2 (2008), Execution of Steel Structures and Aluminium Structures. Part 2: Technical Requirements for the Execution of Steel Structures, British Standards Institution; British.
  5. Brickford, J.H. (2008), Introduction to the Design and Behaviour of Bolted Joints, CRC Press, Marcel Dekker, New York
  6. Cabrero, J.M. and Bayo, E. (1991), "The semi-rigid behaviour of three-dimensional steel beam-to-column joints subjected to proportional loading. Part I. Experimental evaluation", J. Construct. Steel Res., 63(1), 1241-1253. https://doi.org/10.1016/j.jcsr.2006.11.004.
  7. Cabrera, M., Tizani, W., Mahmood, M. and Shamsudin, M.F. (2020), "Analysis of Extended Hollo-Bolt connections: Combined failure in tension", J. Constr. Steel Res., 165, 105766. https://doi.org/10.1016/j.jcsr.2019.105766.
  8. Debnath, P.P. amd Chan, T.M. (2011), "Tensile behaviour of headed anchored hollo-bolts in concrete filled hollow steel tube connections", Eng. Struct., 234, 111982. https://doi.org/10.1016/j.engstruct.2021.111982.
  9. Elghazouli, A.Y., Malaga-Chuquitaype, C., Castro, J.M. and Orton, A.H. (2009), "Experimental monotonic and cyclic behaviour of blind-bolted angle connections", Eng. Struct., 31(1), 2540-2553. https://doi.org/10.1016/j.engstruct.2009.05.021.
  10. Eurocode 3 (2005), Design of steel structures, Part 1-8: Design of joints, European Committee for Standardisation (CEN), Brussels, Belgium.
  11. GB/T 196-2003 (2003), General Propose Metric Screw Threads-Basic Dimensions, China Construction Press; Beijing, China.
  12. GB 50017-2017 (2017), Code for Design of Steel Structures, China Standard Press, Beijing, China.
  13. Jaspart, J.P. (1991), Etude de la Semi-Rigidite des Noeuds PoutreColonne et Son Influence sur la Resistance et la Stabilite des Ossatures in Acier, Ph.D. Dissertation; University of Liege, Liege.
  14. Klippel, S. (1998), "Recent design developments with blind mechanically operated bolt systems for use with hollow section steelwork", J. Construct. Steel Res., 46(1), 267-268. https://doi.org/10.1016/S0143-974X(98)00079-0.
  15. Lee, J., Goldsworthy, H.M. and Gad, E.F. (2010), "Blind bolted T-stub connections to unfilled hollow section columns in low rise structures", J. Construct. Steel Res., 66(1), 981-992. https://doi.org/10.1016/j.jcsr.2010.03.016.
  16. Liu, M., Zhu, X.L., Wang, P.J., WuLan, T.Y. and Hu, S.Q. (2017), "Tension strength and design method for thread-fixed one-side bolted T-stub", Eng. Struct., 150(1), 918-933. https://doi.org/10.1016/j.engstruct.2017.07.093.
  17. Loureiro, A., Moreno, A., Gutierrez, R. and Reinosa, J.M. (2012), "Experimental and numerical analysis of three-dimensional semi-rigid steel joints under non-proportional loading", Eng. Struct., 38(1), 68-77. https://doi.org/10.1016/j.engstruct.2011.12.048.
  18. Latour, M. and Rizzano G. (2021), "Numerical study on the resistance of thread-fixed one-side bolts: Tensile and bearing strength", Struct., 32, 958-972. https://doi.org/10.1016/j.istruc.2021.03.083.
  19. Nakashima, M., Inoue, K. and Tada, M. (1998), "Classification of damage to steel buildings observed in the 1995 Hyogoken-Nanbu earthquake", Eng. Struct., 20(4), 271-281. https://doi.org/10.1016/S0141-0296(97)00019-9.
  20. Tahir, M.M., Mohammadhosseini, H., Negian, S.P. and Effendi, M.K. (2018), "I-beam to square hollow column blind bolted moment connection: Experimental and numerical study", J. Construct. Steel Res., 148(1), 383-398. https://doi.org/10.1016/j.jcsr.2018.06.012.
  21. Wang, Z.Y., Tizani, W. and Wang, Q.Y. (2010), "Strength and initial stiffness of a blind-bolt connection based on T-stub model", Eng. Struct., 32(1), 2505-2517. https://doi.org/10.1016/j.engstruct.2010.04.005.
  22. Wang, Z.Y. and Wang, Q.Y. (2016), "Yield and ultimate strengths determination of a blind bolted endplate connection to square hollow section column", Eng. Struct., 111(1), 345-369. https://doi.org/10.1016/j.engstruct.2015.11.058.
  23. Wu Lan, T.Y., Wang, P.J., Li, Y., You, Y. and Tang, F.N. (2018), "Numerical investigation on strength and failure modes of thread-fixed one-side bolted T-stub under tension", Eng. Struct., 169(15), 15-36. https://doi.org/10.1016/j.engstruct.2018.05.029.
  24. Wang, P.J., Sun, L.L., Liu, M., Zhang, B.X., Hu, X.F. and Yu, J.X. (2020), "Experimental studies on thread-fixed one-side bolted connection of beam to hollow square steel tube under static bending moment", Eng. Struct., 214(1), 110655. https://doi.org/10.1016/j.engstruct.2020.110655.
  25. Wu, Q.G., Wang, H.J., Qian, H.L., Han, K. and Fan, F, (2020), "Effect of insufficient screwing depth of bolt on mechanical behavior of boltball joint and stability of single-layer reticulated shell", Eng. Struct., 213, 110590. https://doi.org/10.1016/j.jcsr.2016.04.001.
  26. Zhu, X.L., Wang, P.J., Liu, M., WuLan, T.Y. and Hu, S.Q. (2017), "Behaviours of one-side bolted T-stub through thread holes under tension strengthened with baking plate", J. Constr. Steel Res., 134(1), 53-65. https://doi.org/10.1016/j.jcsr.2017.03.010.
  27. Zoetemeijer, P. (1974), "A design method for the tension side of statically loaded bolted beam-to-column connections", Heron, 20(1), 1-59.
  28. Zhao, M.S., Lee, C.K. and Chiew, S.P. (2016), "Tensile behavior of high performance structural steel T-stub joints", J. Construct. Steel Res., 122(1), 316-325. https://doi.org/10.1016/j.jcsr.2016.04.001.