한국지반환경공학회 논문집 (Journal of the Korean GEO-environmental Society)

한국지반환경공학회 (Korean Geo-Environmental Society)
권호 표지
DOI QR코드

DOI QR Code

수치해석을 이용한 시공방법에 따른 판넬식 옹벽의 거동 분석에 관한 연구

Numerical Approach to Evaluate the Behavior of Concrete Panel Considering Construction Method

  • Junhee, Kang (Dept. of Civil Engineering, Kangwon National University) ;
  • Hoki, Ban (Dept. of Civil Engineering, Kangwon National University)
  • 투고 : 2022.10.19
  • 심사 : 2022.11.09
  • 발행 : 2022.12.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

본 논문은 Top-down 방식과 Bottom-up 방식으로 시공된 프리캐스트 판넬식 옹벽의 안전율 변화를 PLAXIS 2D 소프트웨어를 사용하여 수치해석하였다. 수치해석 조건은 시공방식, 네일 및 판넬의 고정방법, 뒤채움재 다짐상태, 강우조건 등이 있다. Top-down 방식과 Bottom-up 방식의 차이점은 뒤채움재의 유무와 지반굴착의 방식으로, Top-down 방식은 지반을 수직으로 굴착한 뒤 시공하나 Bottom-up 방식은 지반을 경사를 주어 굴착한 뒤 모르타르 및 뒤채움재를 이용하여 판넬을 부착한다. 수치해석 결과 Top-down 방식은 Bottom-up 방식과 비교하였을 때, 우기를 제외한 모든 경우에 더 높은 안전률을 확보하였다. Top-down 방식의 우기 시 안전율 저하는 Top-down 방식으로 시공 시 프리캐스트 판넬을 부착하기 위해 사용한 모르타르가 주된 원인이 된 것으로 판단하였다.

This paper analyze the precast panel retaining wall's safety factor changes based on the numerical analysis using PLAXIS 2D software. Numerical analysis conditions include construction method, nail and panel fixing method, backfill material compaction conditions, rainfall conditions. The classification according to the construction method of the precast panel retaining wall includes the top-down and bottom-up methods. The difference between the top-down and bottom-up methods is the presence or absence backfill material and the ground excavation method. The top-down method involves vertically excavating the ground and attaching the panel using mortar, but in the bottom-up method, the ground is vertically excavated and harden the backfill material. As a result of numerical analysis, the top-down method secured a higher safety factor in all cases except the rainfall conditions.

키워드

과제정보

이 논문은 2020년도 정부(교육부)의 재원으로 한국연구재단의 지원을 받아 수행된 기초연구사업임(No. 2020R1A2C1101883).

참고문헌

  1. Babaei, M. (2016), "Finite element analysis of freezing effect on soil nail wall", Ryerson University.
  2. Fawaz, A., Farah, E. and Hagechehade, F. (2014), "Slope stability analysis using numerical modelling", American Journal of Civil Engineering, Vol. 2, No. 3, pp. 60-67. https://doi.org/10.11648/j.ajce.20140203.11
  3. Hastuty, I. P. and Prambudi, R. (2020), "Analysis of slope stability by the planning of cantilever retaining wall reinforcement using the application of Plaxis (case study: substation Panyabungan sta 0+ 060)", IOP Conference Series: Materials Science and Engineering, Vol. 851, No. 1, pp. 012021.
  4. Jang, S. H. and Chung, J. S. (2019), "Concrete-panel retaining wall anti-crack sleeve inserted, Concrete-Panel Retaining Wall anti-crack sleeve inserted", The Journal of the Convergence on Culture Technology, Vol. 5, No. 3, pp. 345-349. https://doi.org/10.17703/JCCT.2019.5.3.345
  5. Kim, H. J. (2013), "Analysis of Reinforcement Mechanism of Precast Panel Retaining Wall Method Using pressure-injected grouting Stell Pipe Nailing", Chungnam National Unicersity.
  6. Kim, H. T., Lee, H. J., Kim, J. M., Ryu, J. W. and Sung, N. Y. (2006), "Behavioral characteristics of prestressed earth method reinforced with earth bolt", Korean Geotechnical Society, pp. 662-669.
  7. Kwon, Y. K., Min, K. N., Hwang, Y. C., Ban, H. K. and Lee, M. J. (2020), "Evaluation of field application of precast concretepanel retaining wall attached to in-situ ground using field test and numerical analysis", Journal of the Korean Geotechnical Society, Vol. 36, No. 12, pp. 99-106. https://doi.org/10.7843/KGS.2020.36.12.99
  8. Min, K. N., Lee, J. W., Lee, J. K., Kang, I. K. and Ahn, T. B. (2016), "Field application of a precast concrete-panel retaining wall adhered to in-situ ground", The Korean Society of Engineering Geology, Vol. 26, No. 1, pp. 51-61.
  9. Mortezaee, M. and Akhtarpour, A. (2016), "Validation of the structural analysis by PLAXIS 2D geotechnical software", GeoChina 2016, pp. 25-32.
  10. Rawat, S. and Gupta, A. K. (2016), "Analysis of a nailed soil slope using limit equilibrium and finite element methods", International Journal of Geosynthetics and Ground Engineering, Vol. 2, No. 4, pp. 1-23. https://doi.org/10.1007/s40891-015-0041-3
  11. Shin, Y. C. (2017), "Development of environment-friendly panel type retaining wall capable of vertical adhesion to in-situ ground and its characteristics", Woosong University.
  12. Shin, Y. C., Min, K. N., Kim, J. H. and Ahn, T. B. (2016), "Behavior Characteristics of Precast Concrete-Panel Retaining Wall Adhered to In-situ Ground through Large Scaled Load Test", Korean Geo-Environmental Society, Vol. 17, No. 11, pp. 45-53. https://doi.org/10.14481/jkges.2016.17.11.45
  13. Shiu, Y. K. and Chang, G. W. K. (2006), "Effects of inclination, length pattern and bending stiffness of soil nails on behaviour of nailed structures", Geotechnical Engineering Office, Civil Engineering and Development Department.