DOI QR코드

DOI QR Code

Influence of geometric factors on pull-out resistance of gravity-type anchorage for suspension bridge

  • Hyunsung, Lim (Department of Wind Power Business, Hanwha Corporation/E&C) ;
  • Seunghwan, Seo (Department of Geotechnical Engineering Research, Korea Institute of Civil Engineering and Building Technology) ;
  • Junyoung, Ko (Department of Civil Engineering, Chungnam National University) ;
  • Moonkyung, Chung (Department of Geotechnical Engineering Research, Korea Institute of Civil Engineering and Building Technology)
  • 투고 : 2022.07.13
  • 심사 : 2022.12.12
  • 발행 : 2022.12.25

초록

The geometry of the gravity-type anchorage changes depends on various factors such as the installation location, ground type, and relationship with the upper structure. In particular, the anchorage geometry embedded in the ground is an important design factor because it affects the pull-out resistance of the anchorage. This study examined the effect of four parameters, related to anchorage geometry and embedded ground conditions, on the pull-out resistance in the gravity-type anchorage through two-dimensional finite element analysis, and presented a guide for major design variables. The four parameters include the 1) flight length of the stepped anchorage (m), 2) flight height of the stepped anchorage (n), 3) the anchorage heel height (b), and 4) the thickness of the soil (e). It was found that as the values of m increased and the values of n decreased, the pull-out resistance of the gravity-type anchorage increased. This trend is related to the size of the contact surface between the anchorage and the rock, and it was confirmed that the value of n, which has the largest change rate of the contact surface between the anchorage and the rock, has the greatest effect on the pull-out resistance of the anchorage. Additionally, the most effective design was achieved when the ratio of the step to the bottom of the anchorage (m) was greater than 0.7, and m was found to be an important factor in the pull-out resistance behavior of the anchorage.

키워드

과제정보

This research was supported by a grant from the project "Development of Smart Complex Solution for Large Deep Underground Space Using Artificial Intelligence" which was funded by the Korean Institute of Civil Engineering and Building Technology (KICT) and the Construction Technology Research Program (22SCIP-C151438-04) funded by the Ministry of Land, Infrastructure, and Transport of the Korean government.

참고문헌

  1. Adanur, S., Gunaydin, M., Altunisik, A.C. and Sevim, B. (2012), "Construction stage analysis of Humber suspension bridge", Appl. Math. Model., 36(11), 5492-5505. https://doi.org/10.1016/j.apm.2012.01.011.
  2. ASCE (1979), "Long span of suspension bridge: history and performance", Proceedings of the ASCE National Conventions, Boston, MA, USA.
  3. Cho, J., Lim, H., Jeong, S. and Kim, K. (2015), "Analysis of lateral earth pressure on a vertical circular shaft by considering the 3D arching effect", Tunn. Undergr. Sp. Tech., 48, 11-19. https://doi.org/10.1016/j.tust.2015.01.002.
  4. Das, S., Halder, K. and Chakraborty, D. (2022), "Seismic bearing capacity of shallow embedded strip footing on rock slopes", Geomech. Eng., 30(2), 123-138. https://doi.org/10.12989/gae.2022.30.2.123.
  5. Deng, Y., Li, A., Chen, S. and Feng, D. (2018), "Serviceability assessment for long-span suspension bridge based on deflection measurements", Struct. Control Health Monit., 25(11), 1-23. https://doi.org/10.1002/stc.2254.
  6. Gwon, S.G. and Choi, D.H. (2018), "Static and dynamic analyses of a suspension bridge with three-dimensionally curved main cables using a continuum model", Eng. Struct., 161, 250-264, 2018. https:/doi.org/ 10.1016/j.engstruct.2018.01.062.
  7. Han, Y., Liu, X., Wei, N., Li, D., Deng, Z., Wu, X. and Liu, D. (2019), "A comprehensive review of the mechanical behavior of suspension bridge tunnel-type anchorage", Adv. Mater. Sci. Eng., 2019, 1-9. https://doi.org/10.1155/2019/3829281.
  8. Jaiswal, A. and Kumar, R. (2022), "Finite element analysis of granular column for various encasement conditions subjected to shear load", Geomech. Eng., 29(6), 645-655. https://doi.org/10.12989/gae.2022.29.6.645.
  9. Karira, H., Kumar, A., Ali, T.H., Mangnejo, D.A. and Mangi, N. (2022), "A parametric study of settlement and load transfer mechanism of piled raft due to adjacent excavation using 3D finite element analysis", Geomech. Eng., 30(2), 169-185. https://doi.org/10.12989/gae.2022.30.2.169.
  10. Kim, Y., Lim, H. and Jeong, S. (2020), "Seismic response of vertical shafts in multi-layered soil using dynamic and pseudostatic analyses", Geomech. Eng., 21(3), 269-277. https://doi.org/10.12989/gae.2020.21.3.269.10.12989.
  11. Ko, J., Cho, J. and Jeong S. (2018), "Analysis of load sharing characteristics for a piled raft foundation", Geomech. Eng., 16(4), 449-461. https://doi.org/10.12989/gae.2018.16.4.449.
  12. Ko, J., Kim, S., Kim, S. and Seo, H. (2020), "Utilizing building foundations as micro-scale compressed air energy storage vessel: Numerical study for mechanical feasibility", J. Energy Storage, 28, 101225. https://doi.org/10.1016/j.est.2020.101225.
  13. Lei, J.Q., Zheng, M.Z. and Xu G.Y. (2012), Suspension Bridge Design, China Communication Press, Beijing, China.
  14. Lekidis, V., Tsakiri, M., Makra, K., Karakostas, C., Klimis, N. and Sous, I. (2005), "Evaluation of dynamic response and local soil effects of the Evripos cable-stayed bridge using multi-sensor monitoring systems", Eng. Geol., 79(1-2), 43-59. https://doi.org/10.1016/j.enggeo.2004.10.015.
  15. Li, J.P. and Li, Y.S. (2006), "Research on displacement of anchorage of suspension bridge", Ground Modification and Seismic Mitigation, Proceedings of the GeoShanghai Conference, Shanghai, China, June.
  16. Lim, H., Seo, S., Lee, S. and Chung, M. (2020), "Analysis of the passive earth pressure on a gravity-type anchorage for a suspension bridge", Geo. Eng., 11, 1-7. https://doi.org/10.1186/s40703-020-00120-5.
  17. Lim, H., Seo, S., Ko, J. and Chung, M. (2021), "Effect of joint characteristics and geometries on tunnel-type anchorage for suspension bridge", Appl. Sci., 11(24), 11688. https://doi.org/10.3390/app112411688.
  18. Ministry of Land, Infrastructure and Transport (MOLIT) (2016), "Korean highway bridge design standard (limit state design)", (in Korean), Seoul, South Korea.
  19. PLAXIS (2020), PLAXIS 2D Reference Manual; Bentley: Exton, PA, USA.
  20. Reul, O. and Randoplh, M.F. (2004), "Design strategies for piled rafts subjected to nonuniform vertical loading", J. Geotech. Geoenviron. Eng., 130(1), 1-13. https:/doi.org/10.1061/(ASCE)1090-0241(2004)130:1(1).
  21. Seo, S., Lim, H. and Chung, M. (2021), "Evaluation of failure mode of tunnel-type anchorage for a suspension bridge via scaled model tests and image processing", Geomech. Eng., 24(5), 457-470. https://doi.org/10.12989/gae.2021.24.5.457.
  22. Yooshin Co., Ltd. (2004a), Noryang Bridge Grand Bridge and Access Road Private Proposal Project: Basic Design Report (in Korean).
  23. Yooshin Co., Ltd. (2004b), Noryang Bridge Grand Bridge and Access Road Private Proposal Project: Geotechnical Soil Report (in Korean).
  24. Yooshin Co., Ltd. (2009a), Paryoung Grand Bridge and Access Road Private Proposal Project: Basic Design Report (in Korean).
  25. Yooshin Co., Ltd. (2009b), Paryoung Grand Bridge and Access Road Private Proposal Project: Geotechnical Soil Report (in Korean).
  26. Yooshin Co., Ltd. (2009a), Ulsan Grand Bridge and Access Road Private Proposal Project: Basic Design Report (in Korean).
  27. Yooshin Co., Ltd. (2009b), Ulsan Grand Bridge and Access Road Private Proposal Project: Geotechnical Soil Report (in Korean).