DOI QR코드

DOI QR Code

A Study on the Quality Deviation of High-Strength Concrete from Multiple Ready Mixed Concrete Companies

다수 레미콘사에서 납품된 콘크리트 품질 편차에 관한 연구

  • Park, Dong-Cheon (Department of Architecture and Ocean Space, Korea Maritime and Ocean University) ;
  • Seok, Won-Kyun (Research & Development Institute, LOTTE Eng. & Con.) ;
  • Jeon, Hyun-Soo (Research & Development Institute, LOTTE Eng. & Con.) ;
  • Kim, Young-Sun (Research & Development Institute, LOTTE Eng. & Con.)
  • Received : 2022.10.28
  • Accepted : 2022.11.15
  • Published : 2022.12.20

Abstract

On large-scale sites, concrete is often delivered from a number of ready-mixed concrete companies, but even if the same concrete mixture table is used, it is thought that there will be a difference in quality due to differences in materials and manufacturing equipment. Due to a lack of previous research in this area, this study measured the properties of fresh concrete, compressive strength, and chlorine ion diffusion coefficient using the concrete supplied by 12 ready-mixed companies in Busan. The fresh concrete properties met the criteria. The compressive strength increased by 137% for 30MPa, 131% for 45MPa, and 117% for 80MPa by specified compressive strength. For the chlorine ion diffusion coefficient, the average value for each specified compressive strength could be derived without significant variation. The higher the compressive strength, the greater the deviation , and the lower the compressive strength, the greater the deviation in the chlorine ion diffusion coefficient.

대형 현장의 경우 다수의 레미콘사에서 콘크리트를 납품받게 되는 경우가 많으나 동일 콘크리트 배합표를 사용하더라도 재료와 제조장비의 등의 차로 인해 품질에 편차가 있을 것으로 생각된다. 하지만 그러한 검토 실적은 미비한 실정에 본 연구에서는 부산 지역의 12개 레미콘사에서 납품 받은 콘크리트를 대상으로 굳기 전 콘크리트 물성 및 압축강도, 염소이온 확산계수를 측정하였다. 굳기 전 콘크리트 물성은 기준을 만족하였고 압축강도는 설계기준 압축강도 대비 128%를 나타내었다. 염소이온 확산계수의 경우도 큰 편차없이 설계기준 압축강도별 평균값을 도출할 수 있었다. 압축강도는 강도가 높을수록 편차가 컸으며 염소이온 확산계수는 강도가 낮을수록 편차가 큰 경향을 파악할 수 있었다.

Keywords

Acknowledgement

This work was supported by the National Research Foundation of Korea(NRF) grant funded by the Korean government (No. 2019R1A2C1088029).

References

  1. KDS 14 20 40: Design Criteria for Durability of Concrete Structures [Internet]. Sejong (Korea): Ministry of Land, Infrastructure and Transport; 2022 Jan. Available from: https://www.kcsc.re.kr/StandardCode/Viewer/41004/KDS%2014%2020%2040
  2. KCS 14 20 10: Standard Specification for General Concrete [Internet]. Sejong (Korea): Ministry of Land, Infrastructure and Transport; 2022 Sep. Available from: https://www.kcsc.re.kr/StandardCode/Viewer/41077/KCS%2014%2020%2010
  3. Park GT, Seo GH, Park MY, Park YJ, Han, MC, Han CG. Influence on properties of concrete in quality of aggregates Site type. Proceedings of the Korea Concrete Institute; 2015 Oct 21; Gyeongju (Korea): The Korea Concrete Institute; 2015. p. 441-2.
  4. Bae JY, Kim JB, Cho SH, Roh HS, Kim JH, Park SB. An experimental study on the quality deviation of concrete using premixed cement and non-premixed cement. Proceedings of the Korea Concrete Institute; 2008 Nov 7; Seoul (Korea): The Korea Concrete Institute; 2008. p. 569-72.
  5. Concrete, mortar and cement-based repair materials: Chloride Migration Coefficient from Non-Steady State Migration Experiment [Internet]. Finland: Nordtest; 1999 Nov. Available from : http://nordtest.info/images/documents/nt-methods/building/NT%20build%20492_Concrete%20mortar%20and%20cement-based%20repair%20materials_Chloride%20migration%20coefficient%20from%20non-steady-state%20migration%20experiments_Nordtest%20Method.pdf