DOI QR코드

DOI QR Code

Seismic retrofitting and fragility for damaged RC beam-column joints using UHP-HFRC

  • Trishna, Choudhury (Civil Engineering Department, Thapar Institute of Engineering and Technology) ;
  • Prem P., Bansal (Civil Engineering Department, Thapar Institute of Engineering and Technology)
  • 투고 : 2021.10.04
  • 심사 : 2022.11.12
  • 발행 : 2022.11.25

초록

Reinforced concrete (RC) beam column joints (BCJ) have mostly exhibited poor seismic performance during several past earthquakes, typically due to the poor-quality concrete or lack of reinforcement detailing typical of pre-code design practice. The present study is motivated towards numerical simulation and seismic fragility assessment of one such RC-BCJ. The BCJ is loaded to failure and strengthened using Ultra High Performance-Hybrid Fiber Reinforced Concrete (UHP-HFRC) jacketing. The strengthening is performed for four different BCJ specimens, each representing an intermediate damage state before collapse. viz., slight, moderate, severe, and collapse. From the numerical simulation of all the BCJ specimens, an attempt is made to correlate different modelling and design parameters of the BC joint with respect to the damage states. In addition, seismic fragility analysis of the original as well as the retrofitted damaged BCJ specimens show the relative enhancement achieved in each case.

키워드

과제정보

The authors thank the Civil Engineering Department(CED) and Mr. Faizal Zaraqar, (Former Master's student at CED) for the research support provided at Thapar Institute of Engineering and Technology, Patiala, India.

참고문헌

  1. ASCE/SEI Seismic Rehabilitation Standards Committee (2007), Seismic Rehabilitation of Existing Buildings (ASCE/SEI 41-06), American Society of Civil Engineers, Reston, VA, May.
  2. BIS (2000), Indian Standard for Plain and Reinforced ConcreteCode of Practice, IS 456, Bureau of Indian Standards, New Delhi, India.
  3. BIS (2019), Indian Standard for Concrete Mix Proportioning Guidelines (Second Revision), IS 10262, Bureau of Indian Standards, New Delhi, India.
  4. Celik, O.C. and Ellingwood, B.R. (2008), "Modeling beamcolumn joints in fragility assessment of gravity load designed reinforced concrete frames", J. Earthq. Eng., 12(3), 357-381. https://doi.org/10.1080/13632460701457215.
  5. Celik, O.C. and Ellingwood, B.R. (2010), "Seismic fragilities for non-ductile reinforced concrete frames-role of aleatoric and epistemic uncertainties", Struct. Saf., 32(1), 1-12. https://doi.org/10.1016/j.strusafe.2009.04.003.
  6. Chen, W., Shou, W., Qiao, Z. and Cui, S. (2019), "Seismic performance of non-ductile RC frames strengthened with CFRP", Compos. Struct., 221, 110870. https://doi.org/10.1016/j.compstruct.2019.04.042.
  7. Choudhury, T. and Kaushik, H.B. (2019), "Treatment of uncertainties in seismic fragility assessment of RC frames with masonry infill walls", Soil Dyn. Earthq. Eng., 126, 105771. https://doi.org/10.1016/j.soildyn.2019.105771.
  8. Choudhury, T., Kumar, V., Rashid, F. and Kaushik, H.B. (2020), "Seismic vulnerability assessment and strengthening of new market building damaged after January 4, 2016, Imphal, India, Earthquake", J. Perform. Constr. Facil., 34(2), 04019116. https://doi.org/10.1061/(ASCE)CF.1943-5509.0001392.
  9. CSI (2015), Structural Analysis Program, SAP2000-Advanced, Static and Dynamic Finite Element Analysis of Structures, Computers and Structures Inc., (CSI), Berkeley, USA.
  10. Di Trapani, F. and Malavisi, M. (2019), "Seismic fragility assessment of infilled frames subject to mainshock/aftershock sequences using a double incremental dynamic analysis approach", Bull. Earthq. Eng., 17(1), 211-235. https://doi.org/10.1007/s10518-018-0445-2.
  11. Faleschini, F., Gonzalez-Libreros, J., Zanini, M.A., Hofer, L., Sneed, L. and Pellegrino, C. (2019), "Repair of severelydamaged RC exterior beam-column joints with FRP and FRCM composites", Compos. Struct., 207, 352-363. https://doi.org/10.1016/j.compstruct.2018.09.059.
  12. Ghasemitabar, A., Rahmdel, J.M. and Shafei, E. (2020), "Cyclic performance of RC beam-column joints enhanced with superelastic SMA rebars", Comput. Concrete, 25(4), 293-302. https://doi.org/10.12989/cac.2020.25.4.293.
  13. Ghobarah, A. and Biddah, A. (1999), "Dynamic analysis of reinforced concrete frames including joint shear deformation", Eng. Struct., 21(11), 971-987. https://doi.org/10.1016/S0141-0296(98)00052-2.
  14. Ghobarah, A. and Said, A. (2002), "Shear strengthening of beamcolumn joints", Eng. Struct., 24(7), 881-888. https://doi.org/10.1016/S0141-0296(02)00026-3.
  15. Grassl, P. and Jirasek, M. (2006), "Damage-plastic model for concrete failure", Int. J. Solid Struct., 43(22-23), 7166-7196. https://doi.org/10.1016/j.ijsolstr.2006.06.032.
  16. HAZUS (2013), Multi-hazard Loss Estimation Methodology, Earthquake Model, HAZUS-MH MR4 Technical Manual, National Institute of Building Sciences and Federal Emergency Management Agency (NIBS and FEMA), Washington, DC.
  17. Hosseinzadeh, S. and Galal, K. (2020), "Seismic fragility assessment and resilience of reinforced masonry flanged wall systems", J. Perform. Constr. Facil., 34(1), 04019109. https://doi.org/10.1061/(ASCE)CF.1943-5509.0001383.
  18. Hu, B. and Kundu, T. (2019), "Seismic performance of interior and exterior beam-column joints in recycled aggregate concrete frames", J. Struct. Eng., 145(3), 04018262. https://doi.org/10.1061/(ASCE)ST.1943-541X.0002261.
  19. Jeon, J.S., Park, J.H. and DesRoches, R. (2015), "Seismic fragility of lightly reinforced concrete frames with masonry infills", Earthq. Eng. Struct. Dyn., 44(11), 1783-1803. https://doi.org/10.1002/eqe.2555.
  20. Jiang, Z.Q., Yang, X.F., Dou, C., Li, C. and Zhang, A.L. (2019), "Cyclic testing of replaceable damper: Earthquake-resilient prefabricated column-flange beam-column joint", Eng. Struct., 183, 922-936. https://doi.org/10.1016/j.engstruct.2019.01.060.
  21. Lowes, L.N. and Altoontash, A. (2003), "Modeling reinforcedconcrete beam-column joints subjected to cyclic loading", J. Struct. Eng., 129(12), 1686-1697. https://doi.org/10.1061/(ASCE)0733-9445(2003)129:12(1686).
  22. Mander, J.B., Priestley, M.J. and Park, R. (1988), "Theoretical stress-strain model for confined concrete", J. Struct. Eng., 114(8), 1804-1826. https://doi.org/10.1061/(ASCE)0733-9445(1988)114:8(1804).
  23. Nahar, M., Islam, K. and Billah, A.M. (2020), "Seismic collapse safety assessment of concrete beam-column joints reinforced with different types of shape memory alloy rebars", J. Build. Eng., 29, 101106. https://doi.org/10.1016/j.jobe.2019.101106.
  24. Oinam, R.M., Kumar, P.C. and Sahoo, D.R. (2019), "Cyclic performance of steel fiber-reinforced concrete exterior beamcolumn joints", Earthq. Struct., 16(5), 533-546. https://doi.org/10.12989/eas.2019.16.5.533.
  25. Omidi, M. and Behnamfar, F. (2015), "A numerical model for simulation of RC beam-column connections", Eng. Struct., 88, 51-73. https://doi.org/10.1016/j.engstruct.2015.01.025.
  26. Paulay, T. and Priestley, M.N. (1992), Seismic Design of Reinforced Concrete and Masonry Buildings, Vol. 768, John Wiley & Sons, Inc., New York, USA.
  27. Ricci, P., De Risi, M.T., Verderame, G.M. and Manfredi, G. (2016), "Experimental tests of unreinforced exterior beamcolumn joints with plain bars", Eng. Struct., 118, 178-194. https://doi.org/10.1016/j.engstruct.2016.03.033.
  28. Sengupta, P. and Li, B. (2014), "Seismic fragility evaluation of lightly reinforced concrete beam-column joints", J. Earthq. Eng., 18(7), 1102-1128. https://doi.org/10.1080/13632469.2014.919890.
  29. Sharma, R. and Bansal, P.P. (2019), "Behavior of RC exterior beam column joint retrofitted using UHP-HFRC", Constr. Build. Mater., 195, 376-389. https://doi.org/10.1016/j.conbuildmat.2018.11.052.
  30. Shayanfar, J., Hemmati, A. and Bengar, H.A. (2019), "A simplified numerical model to simulate RC beam-column joints collapse", Bull. Earthq. Eng., 17(2), 803-844. https://doi.org/10.1016/j.conbuildmat.2018.11.052.
  31. Shayanfar, J., Hemmati, A. and Bengar, H.A. (2019), "A simplified numerical model to simulate RC beam-column joints collapse", Bull. Earthq. Eng., 17(2), 803-844. https://doi.org/10.1007/s10518-018-0472-z.
  32. Uma, S.R. and Jain, S.K. (2006), "Seismic design of beam-column joints in RC moment resisting frames-Review of codes", Struct. Eng. Mech., 23(5), 579. https://doi.org/10.12989/sem.2006.23.5.579.
  33. Youssef, M. and Ghobarah, A. (2001), "Modelling of RC beamcolumn joints and structural walls", J. Earthq. Eng., 5(1), 93-111. https://doi.org/10.1080/13632460109350387.