Journal of Power Electronics

  • 제22권12호
  • /
  • Pages.2039-2047
  • /
  • 2022
  • /
  • 1598-2092(pISSN)
  • /
  • 2093-4718(eISSN)
전력전자학회 (The Korean Institute of Power Electronics)
권호 표지
DOI QR코드

DOI QR Code

Multi-objective optimization algorithm for optimizing NVH performance of electric vehicle permanent agnet synchronous motors

  • Yidi, Zhu (Faculty of Electronic Information and Electrical Engineering, Dalian University of Technology) ;
  • Fengxian, Bai (Faculty of Electronic Information and Electrical Engineering, Dalian University of Technology) ;
  • Jianzhong, Sun (Faculty of Electronic Information and Electrical Engineering, Dalian University of Technology)
  • 투고 : 2021.11.12
  • 심사 : 2022.08.30
  • 발행 : 2022.12.20
⟨ 이전 논문 다음 논문 ⟩

초록

The NVH (noise, vibration, harshness) performance of a motor is one of the main problems affecting the comfort, safety, and reliability of electric vehicles. Electromagnetic force is the main cause of motor noise. Most of the existing research focuses on the overall noise level, and does not consider the impact of specific orders of electromagnetic force on noise, which results in a lack of applicability of noise reduction techniques. In this paper, a rotor with an auxiliary slot was used to weaken the electromagnetic force. A multi-objective optimization algorithm combining finite-element simulation with a response surface method was proposed. To determine the relationship between specific orders of electromagnetic force and the auxiliary slot parameters, simulation experiments were carried out with a large range and a large step size in finite-element analysis software. Then, the parameter range with a low value of electromagnetic force was selected. In this new range, the response surface method was used to establish the parameter and electromagnetic force expressions. Then, the linear weighting method in the multi-objective optimization algorithm was selected to determine the objective function of the multi-order electromagnetic force optimization. The weight of each order of electromagnetic force was set according to its contribution to the noise. Finally, the effectiveness of the proposed method was verified by simulations. Simulation results show that this method can quickly and effectively determine the optimal size of the auxiliary slot. In addition, the maximum value of the noise was reduced from 107.6 to 103.2 dB.

키워드

과제정보

Major research program integration project of National Natural Science Foundation of China, U2013601, Jianzhong Sun.

참고문헌

  1. Wang, G., Wang, T., Mu, B.: Review of research on vibration and noise of permanent magnet synchronous motors for vehicles. Automob Appl. Technol. 46(4), 199-200 (2021)
  2. Bao, M.: Analysis of electromagnetic noise and vibration of a permanent magnet motor for electric car. Hefei University of Technology (2014)
  3. Li, C.: Design of permanent magnet assisted synchronous reluctance motor for electric vehicle. Shenyang University of Technology (2020)
  4. Shin, H., Choi, J., Park, H., Jang, S.: Vibration analysis and measurements through prediction of electromagnetic vibration sources of permanent magnet synchronous motor based on analytical magnetic field calculations. IEEE Trans. Magn. 48(11), 4216-4219 (2012) https://doi.org/10.1109/TMAG.2012.2200658
  5. Yang, H., Chen, Y., Deng, Z.: Electromagnetic vibration of PM synchronous motors with different combinations of slot and pole number. Trans. China Electrotechn. Soc. 26(9), 24-30 (2011)
  6. Liu, W., Dai, Y., Ye, F.: Optimization of vibration and noise of vehicle permanent magnet synchronous motor based on auxiliary slot of rotor. Electr. Mach. Control Appl. 47(6), 76-81+109 (2020)
  7. Sakamoto, S., Hirata, T., Kobayashi, T., Kajiwara, K.: Vibration analysis considering higher harmonics of electromagnetic forces for rotating electric machines. IEEE Trans. Magn. 35(3), 1662-1665 (1999) https://doi.org/10.1109/20.767329
  8. Zuo, S., Ma, C., He, R.: Sensitivity analysis and optimization of the radial force of permanent magnet synchronous motor for vehicle. J. Vib. Meas. Diagn. 33(3), 357-363+521 (2013)
  9. Liu, Y., Zuo, S., Deng, W.: Suppression of Electromagnetic force wave of axial permanent magnet motor with auxiliary slot. J. Xi'an Jiaotong Univ. 53(1), 77-85 (2019)
  10. Sun, X., Shi, Z., Lei, G., Guo, Y., Zhu, J.: Multi-objective design optimization of an IPMSM based on multilevel strategy. IEEE Trans. Industr. Electron. 68(1), 139-148 (2021) https://doi.org/10.1109/tie.2020.2965463
  11. Sun, X., Shi, Z., Zhu, J.: Multi-objective design optimization of an IPMSM for EVs based on fuzzy method and sequential Taguchi method. IEEE Trans. Industr. Electron. 68(11), 10592-10600 (2021) https://doi.org/10.1109/TIE.2020.3031534
  12. Shi, Z., Sun, X., Cai, Y., Yang, Z.: Robust design optimization of a five-phase PM hub motor for fault-tolerant operation based on Taguchi method. IEEE Trans. Energy Convers. 35(4), 2036-2044 (2020) https://doi.org/10.1109/TEC.2020.2989438
  13. Li, J., Huang, K., Wu, N.: Optimization of auxiliary slot size of external rotor permanent magnet motor based on RSM. Small Spec. Electr. Mach. 47(10), 21-24 (2019)
  14. He, G.: Analysis of electromagnetic vibration-and-noise of permanent-magnet direct current commutator motors. Shanghai Jiao Tong University (2012)