반도체디스플레이기술학회지 (Journal of the Semiconductor & Display Technology)

한국반도체디스플레이기술학회 (The Korean Society Of Semiconductor & Display Technology)
권호 표지

단일 구동 3축 MEMS자이로스코프의 구적 오차 저감을 위한 설계 기법에 관한 연구

A study on Quadrature error Reduction of Design Methodology in a Single Drive 3-Axis MEMS Gyroscope

  • 박지원 (한국기술교육대학교 메카트로닉스공학과) ;
  • 딘 후사무드 (한국기술교육대학교 메카트로닉스공학과) ;
  • 이병렬 (한국기술교육대학교 메카트로닉스공학부)
  • Park, Ji Won (Department of Mechatronics Engineering, Graduate School of Korea University of Technology and Education) ;
  • Din, Hussamud (Department of Mechatronics Engineering, Graduate School of Korea University of Technology and Education) ;
  • Lee, Byeung Leul (School of Mechatronics Engineering, Korea University of Technology and Education)
  • 투고 : 2022.12.09
  • 심사 : 2022.12.21
  • 발행 : 2022.12.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

In this paper, we have studied the quadrature error reduction for the single drive 3-axis MEMS Gyroscope. There was a limitation of the previous study which is the z-axis quadrature error was large. To reduce this value, design methodologies were presented. And the methodologies included a different mesh application, z-rate spring structure change, and mass compensation for balancing of the structure. We conducted the modal analysis, drive mode analysis and sense mode analysis using COMSOL Multiphysics. As a result, a drive resonant frequency was 26003 Hz, with the x-sense, y-sense, z-sense being 26749 Hz, 26858 Hz, 26920 Hz, respectively. And the Mechanical sensitivity was computed at 2000 degrees per second(dps) input angular rate while the sensitivity for roll, pitch, and yaw was computed 0.011, 0.012, and 0.011 nm/dps respectively. And z-axis quadrature error was successfully improved, 2.78 nm to 0.95 nm, which the improvement rate was about 66 %.

키워드

과제정보

이 논문은 2022년도 정부(산업통상자원부)의 재원으로 한국산업기술진흥원의 지원을 받아 수행된 연구임(P0008458, 2022년 산업혁신인재성장지원사업). 이 논문은 2022년도 한국기술교육대학교 교수 교육연구진흥과제 지원에 의하여 연구되었음.

참고문헌

  1. Bahari, J., Feng, R., & Leung, A. M. "Robust MEMS gyroscope based on thermal principles.", microelectromechanical systems, 23(1), pp.100-116, 2013. https://doi.org/10.1109/JMEMS.2013.2262584
  2. Benser, E. T. "Trends in inertial sensors and applications.", IEEE International Symposium on Inertial Sensors and Systems (ISISS) Proceedings, pp. 1-4, 2015.
  3. Ahmad, N., Ghazilla, R. A. R., Khairi, N. M., & Kasi, V. "Reviews on various inertial measurement unit (IMU) sensor applications.", International Journal of Signal Processing Systems, 1(2), pp.256-262, 2013.
  4. Wang, S., Al Farisi, M. S., Tsukamoto, T., & Tanaka, S. "Roll/pitch rate integrating mems gyroscope using dynamically balanced dual-mass resonator.", IEEE International Symposium on Inertial Sensors and Systems, pp. 1-4, 2020.
  5. Perlmutter, M., & Robin, L. "High-performance, low cost inertial MEMS: A market in motion!", In Proceedings of the 2012 IEEE/ION Position, Location and Navigation Symposium, pp. 225-229, 2012.
  6. Passaro, V. M., Cuccovillo, A., Vaiani, L., De Carlo, M., & Campanella, C. E. "Gyroscope technology and applications: A review in the industrial perspective.", Sensors, 17(10), 2284, 2017. https://doi.org/10.3390/s17102284
  7. Tatar, E., Alper, S. E., & Akin, T. "Quadrature-error compensation and corresponding effects on the performance of fully decoupled MEMS gyroscopes.", Microelectromechanical Systems, 21(3), pp. 656-667, 2012. https://doi.org/10.1109/JMEMS.2012.2189356
  8. Cao, H., Li, H., Kou, Z., Shi, Y., Tang, J., Ma, Z., Shen, C., Liu, J. "Optimization and experimentation of dual-mass MEMS gyroscope quadrature error correction methods.", Sensors, 16(1), 71, 2016. https://doi.org/10.3390/s16010071
  9. Din, H., Iqbal, F., & Lee, B. "Sensitivity Analysis of Single-Drive, 3-axis MEMS Gyroscope Using COMSOL Multiphysics.", Micromachines, 11(12), 1030, 2020. https://doi.org/10.3390/mi11121030
  10. Din, H., Iqbal, F., & Lee, B., "Design Approach for Reducing Cross-Axis Sensitivity in a Single-Drive Multi-Axis MEMS Gyroscope.", Micromachines, 12(8), 902, 2021. https://doi.org/10.3390/mi12080902
  11. Din, H., Iqbal, F., & Lee, B. "Mode ordering of single-drive multi-axis MEMS gyroscope for reduced cross-axis sensitivity.", Sensors and Actuators A: Physical, 332, 113145, 2021. https://doi.org/10.1016/j.sna.2021.113145
  12. Din, H., Iqbal, F., & Lee, B., "Modelling and optimization of single drive 3-axis MEMS gyroscope", Microsystem Technologies, 26(9), pp. 2869-2877, 2020. https://doi.org/10.1007/s00542-020-04840-7