반도체디스플레이기술학회지 (Journal of the Semiconductor & Display Technology)

한국반도체디스플레이기술학회 (The Korean Society Of Semiconductor & Display Technology)
권호 표지

소형 디퓨저의 최적화 설계

Optimization Design of Compact Diffuser

  • 이영태 (안동대학교 전자공학교육과)
  • Lee, Young Tae (Dept. of Electronic Engineering Education, Andong National University)
  • 투고 : 2022.12.13
  • 심사 : 2022.12.16
  • 발행 : 2022.12.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

In this paper, an optimization design method of a diffuser using Bernoulli's theorem was reviewed. The aspect ratio of the cylindrical diffuser chamber and the diameter ratio of the air inlet and outlet were used as design parameters. For the optimal design of the cylindrical diffuser chamber, the air flow inside the chamber was simulated using ANSYS while changing the aspect ratio of the chamber. In order to confirm the simulation results, the diffuser manufactured using the laser processing machine was measured. Through ANSYS simulation and measurement, it was found that the optimal design condition was when the aspect ratio (chamber height/radius) of the diffuser chamber was 1/2 and the diameter ratio of the air inlet and outlet was also 1/2.

키워드

참고문헌

  1. A. Olsson, G. ran Stemme, and E. Stemme, "Diffuser-element design investigation for valve-less pump," Sensors and Actuators A:Physical, Vol. 57, Issue 2, pp. 2137-143, 1996.
  2. S.K. Rekha, and B.K. Kumar, "Design and analysis of conical exhaust diffuser," International Journal of Innovative Technology, Vol. 6, Issue 1, pp. 327-330, 2018.
  3. K.U. Ziegler, H.E. Gallus, and R. Niehuis, "A study on impeller-diffuser interaction part1: influence on the performance," Journal of Turbomachinery, Vol. 125, Issue 1, pp. 173-182, 2003. https://doi.org/10.1115/1.1516814
  4. A.H.M. Kwong, and A.P. Dowling, "Unsteady flow in diffusers," Journal of Fluids Engineering, Vol. 116, Issue 4, pp. 842-847, 1994. https://doi.org/10.1115/1.2911859
  5. S. Tanaka, H. Tsukamoto, and K. Miyazaki, "Characteristics of the diffuser/nozzle valve-less micro -pump," ASME/JSME 2007 5th Joint Fluids Engineering Conference, USA, Vol. 1, pp. 1135-1142, 2009.
  6. H.M. Abdelmotalib, R.A. Dafsari, Y.S. Hwa, and J.K. Lee, "Computational study of internal flow characteristics of the air induction nozzle," International Journal of Mechanical Sciences, Vol. 204, pp. 1-12, 2021.
  7. R. Pongvuthithum, J. Moran, and T. Sankui, "A flow blurring nozzle design for combustion in a closed system," Applied Thermal Engineering, Vol. 131, pp. 587-594, 2018. https://doi.org/10.1016/j.applthermaleng.2017.12.022