Acknowledgement
본 연구는 산업통상자원부의 제조분야 미세먼지 감축을 위한 공정 맞춤형 실용화 기술개발 사업 (과제번호: 20005842, 산업용 초내열 여과필터 기술 개발)의 지원을 받아 수행되었습니다.
References
- S. Y. Han, Structural analysis and design proposal of fine dust mask with nanofiber filter fabricated using electrospinning, J. Korean Cryst. Growth Cryst. Technol., 27, 191-195 (2017). https://doi.org/10.6111/JKCGCT.2017.27.4.191
- J. Xiao, J. Liang, C. Zhang, Y. Tao, G. W. Ling, and Q. H. Yang, Advanced materials for capturing particulate matter: Progress and perspectives, Small Methods, 2, 1-12 (2018).
- K. H. Kim, E. Kabir, and S. Kabir, A review on the human health impact of airborne particulate matter, Environ. Int., 74, 136-143 (2015). https://doi.org/10.1016/j.envint.2014.10.005
- F. Dusts, G. Mortality, and W. J. Lee, Effects of fine dusts, HRD and GINI on mortality, Korean Public Heal. Res., 45, 83-89 (2019).
- Ministry of Environment, 2019 National Air Pollutants Emission. (2022)
- B. H. Park, S. B. Kim, Y. M. Jo, and M. H. Lee, Filtration characteristics of fine particulate matters in a PTFE/Glass composite bag filter, Aerosol Air Qual. Res., 12, 1030-1036 (2012). https://doi.org/10.4209/aaqr.2012.03.0071
- Q. Wang, Y. Bai, J. Xie, Q. Jiang, and Y. Qiu, Synthesis and filtration properties of polyimide nanofiber membrane/carbon woven fabric sandwiched hot gas filters for removal of PM 2.5 particles, Powder Technol., 292, 54-63 (2016). https://doi.org/10.1016/j.powtec.2016.01.008
- H. Bin Kim, W. J. Lee, S. C. Choi, K. B. Lee, and M. H. Lee, Dependence of the fiber diameter on quality factor of filters fabricated with meta-aramid nanofibers, Sep. Purif. Technol., 222, 332-341 (2019). https://doi.org/10.1016/j.seppur.2019.04.045
- Y. Yu, S. Xiong, H. Huang, L. Zhao, K. Nie, S. Chen, J. Xu, X. Yin, H. Wang, and L. Wang, Fabrication and application of poly (phenylene sulfide) ultrafine fiber, React. Funct. Polym., 150, 104539 (2020). https://doi.org/10.1016/j.reactfunctpolym.2020.104539
- B. H. Park, M. H. Lee, S. B. Kim, and Y. M. Jo, Evaluation of the surface properties of PTFE foam coating filter media using XPS and contact angle measurements, Appl. Surf. Sci., 257, 3709-3716 (2011). https://doi.org/10.1016/j.apsusc.2010.11.116
- B. H. Park, M. H. Lee, S. B. Kim, G. S. Kim, and Y. M. Jo, Preparation and characterization of porous composite filter medium by polytetrafluoroethylene foam coating, J. Air Waste Manag. Assoc., 60, 137-141 (2010). https://doi.org/10.3155/1047-3289.60.2.137
- S. Ahn, E. Shim, Y. Kim, Y. Bae, and H. Eom, Air filtration performance enhancement of PTFE foam-coated filters at high temperatures via secondary strongly adhering PTFE nanofiber coatings, Process Saf. Environ. Prot., 162, 914-922 (2022). https://doi.org/10.1016/j.psep.2022.04.067
- J. Xu, C. Liu, P.C. Hsu, K. Liu, R. Zhang, Y. Liu, and Y. Cui, Roll-to-roll transfer of electrospun nanofiber film for high-efficiency transparent air filter, Nano Lett., 16, 1270-1275 (2016). https://doi.org/10.1021/acs.nanolett.5b04596
- K. Chen, S. P. Nikam, Z. K. Zander, Y. H. Hsu, N. Z. Dreger, M. Cakmak, and M. L. Becker, Continuous fabrication of antimicrobial nanofiber mats using post-electrospinning functionalization for roll-to-roll scale-up, ACS Appl. Polym. Mater., 2, 304-316 (2020). https://doi.org/10.1021/acsapm.9b00798
- C. Su, Y. Li, H. Cao, C. Lu, Y. Li, J. Chang, and F. Duan, Novel PTFE hollow fiber membrane fabricated by emulsion electrospinning and sintering for membrane distillation, J. Membr. Sci., 583, 200-208 (2019). https://doi.org/10.1016/j.memsci.2019.04.037
- Helmiyati and M. Aprilliza, Characterization and properties of sodium alginate from brown algae used as an ecofriendly superabsorbent, IOP Conf. Ser. Mater. Sci. Eng., 188, 012019 (2017). https://doi.org/10.1088/1757-899X/188/1/012019
- H. S. Mansur, C. M. Sadahira, A. N. Souza, and A. A. P. Mansur, FTIR spectroscopy characterization of poly (vinyl alcohol) hydrogel with different hydrolysis degree and chemically crosslinked with glutaraldehyde, Mater. Sci. Eng. C, 28, 539-548 (2008). https://doi.org/10.1016/j.msec.2007.10.088