DOI QR코드

DOI QR Code

Structural Safety and Critical Speed Analysis of 2-Speed Shift Reducer

2속 변속 감속기의 구조 안전성 분석과 위험속도 해석

  • Received : 2022.06.17
  • Accepted : 2022.11.24
  • Published : 2022.12.01

Abstract

The structure and operating principle of the 2-speed shift reducer were explained, the allowable bending stress value of the material was compared with the analysis result through FM structural analysis program, and the average stress distribution value of von Mises was performed on the gear root atmosphere. The structural safety of the 2-speed planetary gear reducer was verified through FM structural analysis. The natural frequency was calculated by applying the specifications of the planetary gears of the 2-speed gearbox, and the critical speed of resonance was calculated by calculating the natural frequency and the transmission error of the engaged gear pair. As a result of analyzing the critical speed, since it is formed higher than the actual operating speed range, it is considered safe because there is no resonance problem due to the suggested specifications of the planetary gears of the 2-speed shift reduction.

Keywords

Acknowledgement

본 연구는 중소벤처기업진흥공단, 창업 전략형 지원 사업 지원과제(과제번호: S2963106, 과제명: 2속 자동 변속 기능이 가능한 스마트형 유압식 감속시스템 모듈 개발)와 관련하여 작성되었음.

References

  1. M. H. Bae, H. W. Lee and N. G. Park, "An Investigation on Vibration Characteristics of Vehicle Transmission", Transactions of the Korean Society Noise and Vibration Engineering, Vol. 10, No.1, pp. 107-116, 2000.
  2. S. H. Joo, O. H. Roh, D. H. Chung, M. H. Bae, and N. G. Park, "Modeling of Transmission Error of A Gear Pair with Modified Teeth", Transactions of the Korean Society for Noise and Vibration Engineering, Vol. 8, No. 5, pp. 841-848, 1998.
  3. M. H. Bae, and N. G. Park, "A Study on Vibration Characteristics by Gear Transmission Error of Vehicle Transmission", Transactions of the Korean Society for Noise and Vibration Engineering, Vol. 11, No.8, pp. 364-373, 2001.
  4. D. W. Dudley, The Handbook of Practical Gear Design and Manufacture, 2nd Edition
  5. M. H. Bae, T. Y. Bae, Y. S. Cho, H. Y. Son and D. J. Kim, "The Stress Analysis of Planetary Gear System of Mixer Reducer for Concrete Mixer Truck", Journal of Drive and Control, Vol. 12, No.4, pp. 77-81, 2015. https://doi.org/10.7839/KSFC.2015.12.4.077
  6. F.E.M 1.001 3rd edition : Section I, Heavy Lifting Appliances
  7. DNV, Standard for Certification No 2.22 Lifting Appliances, October 2011
  8. ISO 6336-6, "Calculation of load capacity of spur and helical gears - Part 6 : Calculation of service life under variable load", 2006
  9. N. G. Lee et al., "A Study on the Improvement of Transmission Error and Tooth Load Distribution using Micro-geometry of Compound Planetary Gear Reducer for Tractor Final Driving Shaft", Journal of Drive and Control, Vol.17, No.1, pp.1-12, 2020. https://doi.org/10.7839/KSFC.2020.17.1.001
  10. S. M. Baek et al., "Design of the Hydro-Mechanical Transmission for a 55kW-Class Agricultural Tractor", Journal of Drive and Control, Vol.17, No.2, pp.19-27, 2020. https://doi.org/10.7839/KSFC.2020.17.2.019
  11. G. H. Jung, "Design of Creep Function for Forklift Automatic Transmission", Journal of Drive and Control, Vol.18, No.2, pp.46-55, 2021. https://doi.org/10.7839/KSFC.2021.18.2.046