Korean Journal of Construction Engineering and Management (한국건설관리학회논문집)

Korea Institute of Construction Engineering and Management (한국건설관리학회)
권호 표지
DOI QR코드

DOI QR Code

Development Process and Field Application Performance Analysis for Rebar Reinforcing Clips (RCC Device) to Improve Workability of 135 Degree Standard Hook

135°표준갈고리 작업성 향상을 위한 철근보강클립 (RCC장치) 개발과정 및 현장적용 성과분석

  • Received : 2021.08.23
  • Accepted : 2021.09.28
  • Published : 2021.11.30
Download PDF
⟨ Previous Next ⟩

Abstract

135 Degree standard hook workability crossed in the Reinforced Concrete (RC) Structure is improved and it reinforces in one side 90° hook binding. As a result, we proposed a One-touch Rebar Reinforcing Clip(RCC Device) that demonstrates the same performance as the 135° standard hook. It was developed through the evaluation of construction and economic analysis. As a result of analyzing 13 sites applied from June 2020, As expected, most of the cases were applied to the structural supervision or the point of the construction supervisor as an irresistible measure. therefore, Through field performance analysis, Various methods such as the method that the original contractor first purchases and then provides after contract with the partner company were proposed for the use of efficient and voluntary reinforcing clip. As a result, It is expected that the contribution in the field will be very high in terms of quality and process management through active utilization.

철근콘크리트 구조물내 교차된 양단 135° 표준갈고리 작업성을 향상시키기기 위하여 한쪽 90° 갈고리에 결속 보강함으로서 135° 표준갈고리와 대등한 성능을 발휘하는 원터치 방식의 철근보강클립(RCC장치)을 제안하였으며, 다양한 성능실험과 해석, 시공성 평가 및 경제성 분석을 통하여 개발 완료하였다. 2020년 6월부터 적용된 총 13개 현장을 분석한 결과, 개발할 당시의 예상한 것과 같이 구조감리나 공사감독관의 지적에 대해 불가항력적인 조치사항으로 적용하는 사례가 대부분이었다. 그러므로 현장성과분석을 통하여 효율적이고 자발적인 철근보강클립의 사용을 위해 원도급자가 우선 구매 후 협력엽체와 계약한 다음 제공하는 방식 등의 여러방식을 제안하였다. 결과적으로 철근보강클립을 적극적인 활용함으로써 현장에서 품질과 공정관리 측면에서 기여도가 매우 클 것으로 예상된다.

Keywords

Acknowledgement

본 개발 및 연구는 CH건설기술의 재원으로 지원을 받아 수행되었음.

References

  1. KDS 14 20 50 (2021). Korea Design Standard. Korea Construction Standards Center.
  2. KCI (2017). Korea Concrete Instiute Standard Specificaion for Concrete. Kimoondang Publishing Company.
  3. ACI Committee 318 (2014). Building Code Requirements for Structural Concrete (ACI 318-14) and Commentary, American Concrete Institute, Farmington Hills, Michigan, USA.
  4. Park, K.Y., and Yun, H.D. (2020). "Clip-type binding implement effect on anchorage behavior of 90-degree end-hooked transverse reinforcement in reinforced concrete columns." Journal of the Korea Institute for Structural Maintenance and Inspection, JMISM, 24(4), pp. 72-80. https://doi.org/10.11112/JKSMI.2020.24.4.72
  5. Park K.Y., and Kim, Y.J. (2020). "Band Steel Locking Device", Patent Public Number 10-2148235; 2020, Korean Intellectual Property Office.
  6. Park, K.Y., Yun, H.D.,(2020). "Constructability and Cost Analysis of the Clip-Type Binding Implement Substituting 135° End-Hooked Transverse Reinforcement in Reinforced Concrete Columns." The Korea Institute of Building Construction, JKIBC, Vol. 20, No. 5, October 2020, pp. 459-469. (In Korean)
  7. Park, K.Y., Yun, H.D., and Hong, S.G., (2021). "Effect of a Steel Clip-Type Binding Implement on the Axial Compressive Behavior of Reinforced Concrete (RC) Columns Confined by 90-Degree End-Hooked Hoops." Journal of the Korea Concrete Institute, JKCI, Vol. 33, No. 5, October 2021, pp. 469-480. (In Korean) https://doi.org/10.4334/JKCI.2021.33.5.469
  8. Kim, E.Y., Kim, Y.J., Choi, S.M., Kim, D.J., and Park, K.Y. (2021). "Bond and Anchorage Composite Behavior of RCC Device for Subsitution Seismic Hook througth Pull-Out Experiment." Korean Society for Advanced Composite Structures, KSACS, 12(2), pp. 21-32. https://doi.org/10.11004/kosacs.2021.12.2.021